![]() |
Yup, believe it was duplicolor gun metallic. I didn't clear coat, just masked the rest of the cover off and painting two light coats and let dry a good day
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#26 (permalink) |
|
Base Member
![]() Join Date: Feb 2011
Location: Ontario
Posts: 210
Drives: '11 370z 6M KAD Spt
Rep Power: 16 ![]() ![]() ![]() ![]() |
Yup, believe it was duplicolor gun metallic.
I didn't clear coat, just masked the rest of the cover off and painting two light coats and let dry a good day or more before re-installing. For the red I used a small paint brush, like the craft store type, and carefully applied the paint to the top of the lettering. It will build up to give a nice thick coat if you keep adding more to the brush and do a little at a time. Have to be careful as if you go to far it will spill over the top of the letter and you have to wipe it off and start over. I dried the parts in the sun for a day as the caliper paint can take a long time to dry if put on thick. If you want to see what the paint looks like now check here when I painted my post MAF tubes a couple months ago. VHT Wrinkle Paint It's a little dusty in the engine bay, but you can see the paint is still excellent.
__________________
2011 Nissan 370Z Touring/Sport, 6MT, KAD |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| painting engine cover/strut brace | destinyZ | DIY Section (Do-It-Yourself) | 30 | 11-08-2016 08:12 PM |
| Finished DIY engine painting | ddvette9 | Exterior & Interior | 4 | 03-01-2011 09:49 AM |
| 370z ENGINE COVER FINISHED | res0zsfa | Exterior & Interior | 14 | 09-12-2010 05:43 AM |
| Just finished my break-in period, does this engine not like to rev? | rsximus | Nissan 370Z General Discussions | 32 | 03-20-2010 02:15 PM |