Buffing...is it bad?

zZSportZz · 06-28-2009, 07:54 PM

So...I own a black car. Every small imperfection shows (even bug guts effect the damn clear coat). I want to get it buffed but have a friend who is like bigtime anti-buffing and says it destroys the clear coat over time. Is buffing really that bad? Will getting it done once a year or so really matter?

Thoughts? Suggestions?

k20z3 · 06-28-2009, 07:55 PM

Ive only heard good from buffing...

frost · 06-28-2009, 08:01 PM

Swirl marks in clear coat as visible because light reflects through them. Buffing levels out the clear coat so light doesn't reflect through. You can remove enough clear coat by buffing that will be bad for the paint. Experienced detailers know how to do this properly, but a person who goes to the store and buys a buffer could potentially end up removing too much clear coat, resulting in various issues such as fading and oxidation.

k20z3 · 06-28-2009, 08:04 PM

What frost says, it kinda "blends" the clear coat in making those scratches not as noticable

frost · 06-28-2009, 08:06 PM

It does that through microscopic abrasives in the compound. That's why good detailers have gauges that tell how thick the clear coat is ... so they don't accidentally take off too much.

zZSportZz · 06-28-2009, 08:30 PM

Well I would get it professionally done, since I knew absolutely nothing about buffing.

k20z3 · 06-28-2009, 08:46 PM

I think youll be happy if you do

frost · 06-28-2009, 08:48 PM

I'm sure you're fine with your once a year plan. The last detailer I used recommended getting it done right before the summer to better protect the paint from the sun.

fly yellow · 06-28-2009, 09:19 PM

I used to have a detail shop when I was 19. Buffing is fine, as long as you use the proper compound for the job at hand. For a new car they would probably use a light polish with very little abrasives. What people don't realize is that it can be a very messy job. I did a car with a heavily oxidized, blue Earl Scheib paint job, and I looked like a giant smurf when I was finished.

SpawnAeroJohn · 06-28-2009, 09:36 PM

Take it from me. If you are goign to buff your car you better be sure you damn well know how to otherwise one wrong move can cost you hundreds to repair.

I suggest doing it yourself but practice because most detail shops will be covered somesort so if they rewin your car they arent liable. They can use any of teh below excuses.

The paint was real bad
The surface was so scratched it made it difficult to repair
The paint was not applied right
The paint was too thin
ETC and I know this because Ive had those problems in the past before I started.

So if you guys want to do a great job go to a website called adams polishes or something like that. Pick up some micro fiber towels, rubbing compound, polishing compound, finishing glaze, and a porter cable buffer. (spell check on the porter cable buffer)

The porter cable buffer does not rotate, it oscilates. So its the ideal buffer for beginners and experts. I love it, I dont own it but I have used it dozens of times in teh past. Its very hard to ruin a paint job with that since it does not rotate. If it does not rotate it makes it easier to not snag the corner of the paint job.

At that website there will be video tutorials on how to use it. I suggest practicing on a family members car first :P

I still need to post a DIY on polishing.

P.S Buffing is not bad if you do it a few times a year or when you really need to. Buffing does remove clear coat but it removes the clear coat by thousands of a cm at a time so if you are experianced then you are safe.

Polishing a car with swirl mark remover is much safer (3M swirl mark remover).

FuszNissan · 06-28-2009, 10:05 PM

Please, please see a professional.

LiquidZ · 06-28-2009, 10:23 PM

I'm glad I stumbled upon this thread. I was thinking on tackling it myself but I might have to reconsider.

One_Quick_Z · 06-28-2009, 10:39 PM

They have Compounds that help prevent you from burning the paint such as High temp compound... you can lean into the buffer and it wont burn your paint...as long as there is enough compound on the car lol

DAN

mrarroyo · 06-29-2009, 06:06 PM

If the paint is showing "issues" I would was the car, then I would use clay bar to remove all the "issues" not removed during the wash. Lastly I would use a "cleaner wax".

If the above does not solve the problem then I would take it to a reputable professional.

arcticreaver · 06-29-2009, 07:00 PM

if i ever wanted to buff my car, i would get a professional to do it. if buffing was bad, pros won't use it for your car. but if you don't know what you are doing, that's a different story.

i don't want to spend 200 in equipment and screw up the paint job. rather have someone that is trained to do it.

06-28-2009, 07:54 PM	#1 (permalink)
zZSportZz A True Z Fanatic Join Date: Mar 2009 Location: Maryland Posts: 1,095 Drives: 370z Blk on Blk 6MT Rep Power: 18	Buffing...is it bad? So...I own a black car. Every small imperfection shows (even bug guts effect the damn clear coat). I want to get it buffed but have a friend who is like bigtime anti-buffing and says it destroys the clear coat over time. Is buffing really that bad? Will getting it done once a year or so really matter? Thoughts? Suggestions?

06-28-2009, 07:55 PM	#2 (permalink)
k20z3 A True Z Fanatic Join Date: May 2009 Location: Denver CO Age: 33 Posts: 2,146 Drives: 2006 Civic SI HFP Rep Power: 404	Ive only heard good from buffing... __________________ 2006 RALLYE RED HONDA CIVIC SI HFP Clint's Helpful Photoshop Hints!

06-28-2009, 08:04 PM	#4 (permalink)
k20z3 A True Z Fanatic Join Date: May 2009 Location: Denver CO Age: 33 Posts: 2,146 Drives: 2006 Civic SI HFP Rep Power: 404	What frost says, it kinda "blends" the clear coat in making those scratches not as noticable __________________ 2006 RALLYE RED HONDA CIVIC SI HFP Clint's Helpful Photoshop Hints!

06-28-2009, 08:46 PM	#7 (permalink)
k20z3 A True Z Fanatic Join Date: May 2009 Location: Denver CO Age: 33 Posts: 2,146 Drives: 2006 Civic SI HFP Rep Power: 404	I think youll be happy if you do __________________ 2006 RALLYE RED HONDA CIVIC SI HFP Clint's Helpful Photoshop Hints!

06-28-2009, 08:48 PM	#8 (permalink)
frost Retired admin Join Date: Dec 2008 Location: Winterfell Posts: 106,613 Drives: Your Wife Crazy Rep Power: 0	I'm sure you're fine with your once a year plan. The last detailer I used recommended getting it done right before the summer to better protect the paint from the sun. Last edited by frost; 06-29-2009 at 07:58 PM. Reason: typo

06-28-2009, 08:01 PM	#3 (permalink)
frost Retired admin Join Date: Dec 2008 Location: Winterfell Posts: 106,613 Drives: Your Wife Crazy Rep Power: 0	Swirl marks in clear coat as visible because light reflects through them. Buffing levels out the clear coat so light doesn't reflect through. You can remove enough clear coat by buffing that will be bad for the paint. Experienced detailers know how to do this properly, but a person who goes to the store and buys a buffer could potentially end up removing too much clear coat, resulting in various issues such as fading and oxidation.

06-28-2009, 08:06 PM	#5 (permalink)
frost Retired admin Join Date: Dec 2008 Location: Winterfell Posts: 106,613 Drives: Your Wife Crazy Rep Power: 0	It does that through microscopic abrasives in the compound. That's why good detailers have gauges that tell how thick the clear coat is ... so they don't accidentally take off too much.

06-28-2009, 08:30 PM	#6 (permalink)
zZSportZz A True Z Fanatic Join Date: Mar 2009 Location: Maryland Posts: 1,095 Drives: 370z Blk on Blk 6MT Rep Power: 18	Well I would get it professionally done, since I knew absolutely nothing about buffing.

06-28-2009, 09:19 PM	#9 (permalink)
fly yellow Enthusiast Member Join Date: May 2009 Location: Baltimore, MD Posts: 455 Drives: 09 yellow 370z Rep Power: 264	I used to have a detail shop when I was 19. Buffing is fine, as long as you use the proper compound for the job at hand. For a new car they would probably use a light polish with very little abrasives. What people don't realize is that it can be a very messy job. I did a car with a heavily oxidized, blue Earl Scheib paint job, and I looked like a giant smurf when I was finished. __________________ A severed foot is the ultimate stocking stuffer. Mitch Hedberg

06-28-2009, 09:36 PM	#10 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	Take it from me. If you are goign to buff your car you better be sure you damn well know how to otherwise one wrong move can cost you hundreds to repair. I suggest doing it yourself but practice because most detail shops will be covered somesort so if they rewin your car they arent liable. They can use any of teh below excuses. The paint was real bad The surface was so scratched it made it difficult to repair The paint was not applied right The paint was too thin ETC and I know this because Ive had those problems in the past before I started. So if you guys want to do a great job go to a website called adams polishes or something like that. Pick up some micro fiber towels, rubbing compound, polishing compound, finishing glaze, and a porter cable buffer. (spell check on the porter cable buffer) The porter cable buffer does not rotate, it oscilates. So its the ideal buffer for beginners and experts. I love it, I dont own it but I have used it dozens of times in teh past. Its very hard to ruin a paint job with that since it does not rotate. If it does not rotate it makes it easier to not snag the corner of the paint job. At that website there will be video tutorials on how to use it. I suggest practicing on a family members car first :P I still need to post a DIY on polishing. P.S Buffing is not bad if you do it a few times a year or when you really need to. Buffing does remove clear coat but it removes the clear coat by thousands of a cm at a time so if you are experianced then you are safe. Polishing a car with swirl mark remover is much safer (3M swirl mark remover).

06-28-2009, 10:05 PM	#11 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 541	Please, please see a professional. __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

06-28-2009, 10:23 PM	#12 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 704	I'm glad I stumbled upon this thread. I was thinking on tackling it myself but I might have to reconsider. __________________

06-28-2009, 10:39 PM	#13 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 218	They have Compounds that help prevent you from burning the paint such as High temp compound... you can lean into the buffer and it wont burn your paint...as long as there is enough compound on the car lol DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

06-29-2009, 06:06 PM	#14 (permalink)
mrarroyo Base Member Join Date: Jun 2009 Location: Heaven on Earth Posts: 211 Drives: 09 Nissan 370Z M6 Rep Power: 15	If the paint is showing "issues" I would was the car, then I would use clay bar to remove all the "issues" not removed during the wash. Lastly I would use a "cleaner wax". If the above does not solve the problem then I would take it to a reputable professional.

06-29-2009, 07:00 PM	#15 (permalink)
arcticreaver Track Member Join Date: Feb 2009 Location: Arcadia, CA Posts: 769 Drives: 2009 Z34 7AT PG Rep Power: 924	if i ever wanted to buff my car, i would get a professional to do it. if buffing was bad, pros won't use it for your car. but if you don't know what you are doing, that's a different story. i don't want to spend 200 in equipment and screw up the paint job. rather have someone that is trained to do it. __________________ http://www.facebook.com/arcticreaver - FaceBook http://www.linkedin.com/pub/sam-yang/a/832/325 - LinkedIn Profile