Robispec Harness Bar Install

FireDan50 · 01-13-2013, 03:45 AM

Found some good info from Schroth on harness mounting specifics:

http://www.hmsmotorsport.com/docs/Co...structions.pdf

As far as shoulder harness angles, downward up to 20 degrees is okay.

For distance from seat back to shoulder harness points: Webbing should be crossed if the distance from the seat openings to the mounting bolt point or harness bar exceeds 450 mm (18”).

When mounting to a harness bar with a wrap mount and the distance to the bar from the seat is less than 450 mm (18”), a section of roll bar padding, fixed with cable ties, should be added to the outside of each of the shoulder harnesses to ensure that they can not further separate when unloaded.

01-13-2013, 03:45 AM	#31 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 20	Found some good info from Schroth on harness mounting specifics: http://www.hmsmotorsport.com/docs/Co...structions.pdf As far as shoulder harness angles, downward up to 20 degrees is okay. For distance from seat back to shoulder harness points: Webbing should be crossed if the distance from the seat openings to the mounting bolt point or harness bar exceeds 450 mm (18”). When mounting to a harness bar with a wrap mount and the distance to the bar from the seat is less than 450 mm (18”), a section of roll bar padding, fixed with cable ties, should be added to the outside of each of the shoulder harnesses to ensure that they can not further separate when unloaded. ChrisSlicks and GaleForce like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Robispec Chassis/Harness Bar	ZInferno0248	Brakes & Suspension	105	08-30-2013 10:07 AM
New harness for aftermarket install	bigaudiofanat	Audio & Video	18	09-11-2011 10:58 AM