★★★ ► CarbonSignal Spec-ME Front Lip ◄ ★★★

tonybui

side, rear, spoiler and spec-me lip? be sure to post pics when all is done !!

__________________
Evo-R CF fang | CF Mirror covers | 20/25 H&R spacers | RE-11 | TopSpeed exhaust + y-pipe | Stillen HFC | Carbon Fiber Amuse rear bumper + Amuse Spoiler | PWJDM

GaleForce

Amuse Sides and rear. I have the Varis rear spoiler. I'll post pics when they show up... Bit of a shipping screw up there...

Have you mounted your lip yet?

__________________

tonybui

ahh nice!

Actually, I sold my lip after it got delivered and went full amuse with vented fenders

__________________
Evo-R CF fang | CF Mirror covers | 20/25 H&R spacers | RE-11 | TopSpeed exhaust + y-pipe | Stillen HFC | Carbon Fiber Amuse rear bumper + Amuse Spoiler | PWJDM

Huan'z

Well I still have a balance with aj for pretty much the whole kit. I just pm him about the rear diff if he can add some mod for me. If not. I might thinking about going amuse body kit too. Lol! Same boat here!


Sent from my iPhone using Tapatalk

Huan Huynh.

Wiggins3377

Anyone install their lip yet? I havent had a chance yet, but i lowered my car over the weekend and im scraping my sport front spoiler every now and then. Just wondering if anyone has installed theirs and if they are lowered whether or not they have issues with scraping the lip. Any insight and pictures would be appreciated.

__________________
AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

anthonyy

Haven't installed mine yet... currently at the shop. The sport spoiler sits lower than the lip will, but because u are lowered, more likely than not, u will be scraping the bottom of the lip now and then

Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

Wiggins3377

I figured I would scrape, just didnt want it to be so bad that the lip would eventually crack. I plan on molding the lip to the bumper so it would be a costly mistake. Post some pics when yours is painted and on the bumper. Would love to see it as a reference point.

__________________
AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

GaleForce

I test fit mine. The fit is good everywhere except the driver side. The lip is spaced out approximately 3+ inches. I'm not sure if 3M double sided tape will hold it. Also the ends of the lip (at the wheelwells) are not fully painted and you can see white fiberglass. I need to get that painted before permanent installation.

Edit - My lip is CF.

__________________

anthonyy

Ouch... 3+ inches??!!

Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

GaleForce

Yes.

__________________

TonySlimfast

throw in some quick snap shotss peoples! im curious

GaleForce

Here is a test fit. I drilled a new mounting hole under the car and significantly reduced the gap. I still have a 0.5-0.75" gap on the driver side that some two sided tape will need to take care of. Other than that, the fit is nice everywhere else.

Right now I'm waiting for some carbon fangs to be delivered before I try to permanently mount this.


Mines test fit by J M Gale, on Flickr

__________________

KaienZ34

Nice, i wish the ME lip came w/fangs. I would have gotten it if so instead of the top secret style one.

__________________

GaleForce

I agree. I was thinking of getting the fangs painted matte/satin black but after test fitting the lip I decided to get the CF fangs.

I really like the Top Secret lip too. It was a tough decision for me.

__________________

CarbonSignal

Pm sent Galeforce.

__________________