Dome Lights - Question on LED's..

Pelican170 · 02-06-2012, 04:53 PM

Hey Guys,

Ok, i havent seen this one talked about...

I bought a set of LED lights for the dome and the first set, when I put them in worked, but when they are set to only go on when your doors aren't opened, they still seem to stay on just barely, almost as if "glowing". If you hit the switch to "off", then they go completely black. I bought another set and it does the same. Soo, is this normal? maybe the LED parts glow slightly after for some reason? Just find it weird that when set to off, they go completely black...

370ZilverZ · 02-06-2012, 06:02 PM

I know I will be corrected if I am wrong, but as I recall, the dome/map light is a 3 position switch. On to turn them on and stay on until the switch is turned off or to door positions. The door position allows the light to come on when the door is opened and stays on for a set period of time dims and turns off. The off position is so that you can open the door and not have the lights turn on.
It sounds to me that the light and switch is operating normally.

Trips · 02-06-2012, 06:11 PM

I'm guessing the socket style hids do that normally, because mine faintly in the dark do the same thing.

I don't think there is any reason to really worry about it since there is almost no draw on the battery.

Pelican170 · 02-07-2012, 08:31 AM

Quote:

Originally Posted by Triple's

I'm guessing the socket style hids do that normally, because mine faintly in the dark do the same thing.

I don't think there is any reason to really worry about it since there is almost no draw on the battery.

Yes, sounds like you know what I am talking about. You can see them very faintly in the dark. And that is my only issue, that they would be draining battery over time...

Pelican170 · 02-07-2012, 01:11 PM

Quote:

Originally Posted by daemon1957

I know I will be corrected if I am wrong, but as I recall, the dome/map light is a 3 position switch. On to turn them on and stay on until the switch is turned off or to door positions. The door position allows the light to come on when the door is opened and stays on for a set period of time dims and turns off. The off position is so that you can open the door and not have the lights turn on.
It sounds to me that the light and switch is operating normally.

no, your not understanding exactly what its doing... has nothing to do with the switch position. the fact is that the LED when on the door position glows very slightly even when it should be off...

nismo 1234 · 02-07-2012, 02:08 PM

i have the same problem. i ordered a new set from JWD. they said their LED dont have this problem, so im waiting for them to arrive and see

it doesnt drain out battery but it bugs me lol.

here's a link to their sale:
NEW** LED Interior Map Light Pods- Free Shipping

Pelican170 · 02-07-2012, 03:42 PM

Quote:

Originally Posted by nismo 1234

i have the same problem. i ordered a new set from JWD. they said their LED dont have this problem, so im waiting for them to arrive and see

it doesnt drain out battery but it bugs me lol.

here's a link to their sale:
NEW** LED Interior Map Light Pods- Free Shipping

Hey thanks. yea it bugs me too! lol. Not sure if ill buy another set since now i have like 7 spare LED light bulbs lol. Thanks again...

Dallaz · 02-07-2012, 04:16 PM

There are 2 ways the lights can plug in, and I had to undo and reattach one of them but other than that they are perfect. I got mine from Diode dynamics. killer price, service, and shipment time. They are also much brighter than most I see in other Z's with different/non stock LED's. They are a 12 LED board and are amazing. check them out

Most people with other aftermarket LED's ask where I got these because of how bright they are. This is not a good example photo of how bada$$ these things look in person but trust me, they're amazing!

Pelican170 · 02-08-2012, 02:16 PM

Quote:

Originally Posted by Dallaz

There are 2 ways the lights can plug in, and I had to undo and reattach one of them but other than that they are perfect. I got mine from Diode dynamics. killer price, service, and shipment time. They are also much brighter than most I see in other Z's with different/non stock LED's. They are a 12 LED board and are amazing. check them out

Most people with other aftermarket LED's ask where I got these because of how bright they are. This is not a good example photo of how bada$$ these things look in person but trust me, they're amazing!

Thanks for the post and pic. Can you tell me how the fitment was for this? Did you have to do anything to the lights or do they fit fine?

Hawk6 · 02-09-2012, 04:03 PM

Dallaz that looks amazing! Do you have a DIY that you can pm me (link to get the LEDs etc)...size LEDs etc ., would love to swap mine out like this!

Dallaz · 02-09-2012, 06:35 PM

Working till late tonight. I'll try and get all the info to you by tomorrow morning

ShockWave · 02-14-2012, 10:48 PM

I have the same issues with my LED Dome Lights . anyknow how to fix?

JWMotoring · 02-15-2012, 11:55 AM

Quote:

Originally Posted by nismo 1234

i have the same problem. i ordered a new set from JWD. they said their LED dont have this problem, so im waiting for them to arrive and see

it doesnt drain out battery but it bugs me lol.

here's a link to their sale:
NEW** LED Interior Map Light Pods- Free Shipping

Quote:

Originally Posted by Hawk6

Dallaz that looks amazing! Do you have a DIY that you can pm me (link to get the LEDs etc)...size LEDs etc ., would love to swap mine out like this!

9 led pods here

[/CENTER]

JWMotoring · 02-15-2012, 11:56 AM

Quote:

Originally Posted by ShockWave

I have the same issues with my LED Dome Lights . anyknow how to fix?

We haven't had any complaints about this issue with our leds. I had them tested before offering them and we've sold quite a few in the last month.

The good thing is they don't use much power at all so no worries about killing the battery if they stay lit a bit.

DIGItonium · 02-15-2012, 12:07 PM

Blue/White LEDs are very sensitive. Even in the off position, there's still a tiny bit of current flowing through the socket (probably a solid state switch from the BCM). Regular bulbs have higher resistance, so it won't light up at all.

Try rigging up a blue/white LED. Fully connect one lead, and use your fingers to "connect" the leads on the other. It'll glow dimly.

It shouldn't drain the battery.

02-06-2012, 04:53 PM	#1 (permalink)
Pelican170 Track Member Join Date: Jul 2010 Location: Sandy Hook, CT Posts: 972 Drives: Nissan 370z Nismo Rep Power: 15	Dome Lights - Question on LED's.. Hey Guys, Ok, i havent seen this one talked about... I bought a set of LED lights for the dome and the first set, when I put them in worked, but when they are set to only go on when your doors aren't opened, they still seem to stay on just barely, almost as if "glowing". If you hit the switch to "off", then they go completely black. I bought another set and it does the same. Soo, is this normal? maybe the LED parts glow slightly after for some reason? Just find it weird that when set to off, they go completely black... __________________ Fast Intentions CF Exhaust - Fast Intentions HFC's - HPS Tubes w/ AFE Dry Flow Filter's

02-06-2012, 06:02 PM	#2 (permalink)
370ZilverZ A True Z Fanatic Join Date: Dec 2011 Location: DFW, TX Age: 66 Posts: 2,321 Drives: '11 BMW Z4 Rep Power: 18	I know I will be corrected if I am wrong, but as I recall, the dome/map light is a 3 position switch. On to turn them on and stay on until the switch is turned off or to door positions. The door position allows the light to come on when the door is opened and stays on for a set period of time dims and turns off. The off position is so that you can open the door and not have the lights turn on. It sounds to me that the light and switch is operating normally. __________________ 370ZilverZ Journal BMW Z4

02-06-2012, 06:11 PM	#3 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	I'm guessing the socket style hids do that normally, because mine faintly in the dark do the same thing. I don't think there is any reason to really worry about it since there is almost no draw on the battery. __________________

02-07-2012, 02:08 PM	#6 (permalink)
nismo 1234 Track Member Join Date: May 2010 Location: Canada BC Posts: 501 Drives: 10 370z M6 40th Rep Power: 15	i have the same problem. i ordered a new set from JWD. they said their LED dont have this problem, so im waiting for them to arrive and see it doesnt drain out battery but it bugs me lol. here's a link to their sale: NEW** LED Interior Map Light Pods- Free Shipping RafPR likes this.

02-07-2012, 04:16 PM	#8 (permalink)
Dallaz A True Z Fanatic Join Date: Jun 2011 Location: North Dallas Posts: 1,272 Drives: 09MontereyBlu370z6MT Rep Power: 15	There are 2 ways the lights can plug in, and I had to undo and reattach one of them but other than that they are perfect. I got mine from Diode dynamics. killer price, service, and shipment time. They are also much brighter than most I see in other Z's with different/non stock LED's. They are a 12 LED board and are amazing. check them out Most people with other aftermarket LED's ask where I got these because of how bright they are. This is not a good example photo of how bada$$ these things look in person but trust me, they're amazing! __________________ AeroJacket Lip Kit \| GTR switch \| NISMO S-Knob \| Blacked-Out-EVERYTHING\| 5% Tint \| Carbon Fangs/Upper Trim \| VOSSEN CV3's \| Painted Headlights \| CF Diffuser

02-09-2012, 04:03 PM	#10 (permalink)
Hawk6 Base Member Join Date: Feb 2012 Location: Vero Beach, Fl Posts: 125 Drives: 2012 370Z Blk Cherry Rep Power: 13	Dallaz that looks amazing! Do you have a DIY that you can pm me (link to get the LEDs etc)...size LEDs etc ., would love to swap mine out like this!

02-09-2012, 06:35 PM	#11 (permalink)
Dallaz A True Z Fanatic Join Date: Jun 2011 Location: North Dallas Posts: 1,272 Drives: 09MontereyBlu370z6MT Rep Power: 15	Working till late tonight. I'll try and get all the info to you by tomorrow morning __________________ AeroJacket Lip Kit \| GTR switch \| NISMO S-Knob \| Blacked-Out-EVERYTHING\| 5% Tint \| Carbon Fangs/Upper Trim \| VOSSEN CV3's \| Painted Headlights \| CF Diffuser

02-14-2012, 10:48 PM	#12 (permalink)
ShockWave Enthusiast Member Join Date: Dec 2011 Location: houston Posts: 303 Drives: 350z Rep Power: 13	I have the same issues with my LED Dome Lights . anyknow how to fix?

02-15-2012, 12:07 PM	#15 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Blue/White LEDs are very sensitive. Even in the off position, there's still a tiny bit of current flowing through the socket (probably a solid state switch from the BCM). Regular bulbs have higher resistance, so it won't light up at all. Try rigging up a blue/white LED. Fully connect one lead, and use your fingers to "connect" the leads on the other. It'll glow dimly. It shouldn't drain the battery. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!!!! My dome lights/trunk/window visor lights went out HELP!!!	dbkustomz	Exterior & Interior	8	10-28-2011 07:49 AM
Dome Lights	bigZ	Exterior & Interior	4	04-04-2011 07:02 AM
Interior Dome Lights	bigZ	Exterior & Interior	5	03-31-2011 02:46 PM
Dome map lights	SophiaZ	Exterior & Interior	4	06-09-2010 04:27 PM
dome lights...	zfokaiz	Exterior & Interior	14	09-25-2009 10:12 PM