MOMO Trek Steering Wheel and Red PW JDM Shift Knob Installed.

karotZ · 09-02-2011, 11:34 AM

Finally got my MOMO Trek Steering Wheel, NRG Short Hub & Quick Release 2.5
and a Red PW JDM Shift Knob installed. Got bored and got these. The only
issue I'm having is despite having 2 airbag resistors, the SRS light keeps
blinking like VDC keeps kicking in lol. Special thanks to Scott B. of Relentless
Autosport and Dat N. of Speed Alliance for excellent service!

P.S. Sorry for pics, aside from it coming from my phone, the car is pretty dirty.

kenchan · 09-02-2011, 11:52 AM

try a srs reset and see if it goes away. i forget wat ohm to use but if it's too much it will blink, if it's too little it will blink as well.

Juruki · 09-02-2011, 12:09 PM

looks good! Just enough red not to make it look busy IMO
Noob question: do you lose your front airbag when u do this mod? Is it safe?

karotZ · 09-02-2011, 12:09 PM

Quote:

Originally Posted by kenchan

try a srs reset and see if it goes away. i forget wat ohm to use but if it's too much it will blink, if it's too little it will blink as well.

Is that the one Mr. Kenchan that you put the ignition to ON, then after the
SRS blinks once, turn ignition to OFF. And then repeat at about 3 to 4
times???

karotZ · 09-02-2011, 12:10 PM

Quote:

Originally Posted by Juruki

looks good! Just enough red not to make it look busy IMO
Noob question: do you lose your front airbag when u do this mod? Is it safe?

Thanks for the compliment sir! Yes, the airbag is gone. I kept it in a safe
place in case I'd sell the car or if a cop gives me a hard time.

kenchan · 09-02-2011, 01:13 PM

Quote:

Originally Posted by karotZ

Is that the one Mr. Kenchan that you put the ignition to ON, then after the
SRS blinks once, turn ignition to OFF. And then repeat at about 3 to 4
times???

sorry i dont remember off hand but check the audio section cause stereo newbs usually forget to plug the SRS indicator thingie on the passenger side and have to do this sequence.

kevr6 · 09-02-2011, 07:49 PM

I had that steering wheel 3 cars ago. I liked how it felt.

SPOHN · 09-02-2011, 08:36 PM

Nice setup. Looks great.

I hope to have a Nardi wheel soon. How to you like the NRG short hub and quick release. I'm looking at that also.

karotZ · 09-02-2011, 09:56 PM

Quote:

Originally Posted by kenchan

sorry i dont remember off hand but check the audio section cause stereo newbs usually forget to plug the SRS indicator thingie on the passenger side and have to do this sequence.

Fixed! I found a thread in here on how to fix it. Thanks!

Quote:

Originally Posted by SPOHN

Nice setup. Looks great.

I hope to have a Nardi wheel soon. How to you like the NRG short hub and quick release. I'm looking at that also.

I didnt go with Nardi steering wheel coz I'm not into deep dish but they do look good though. For the NRG, they're a great company, as for the hub and QR, I cant get any happier - but! I may switch to a QR 2.0 instead.

hdskull · 09-03-2011, 12:03 AM

Looks good man! Glad it finally worked out for you! What did you do with the nismo knob?

karotZ · 09-04-2011, 05:55 PM

Quote:

Originally Posted by hdskull

Looks good man! Glad it finally worked out for you! What did you do with the nismo knob?

Thanks dude! I stored the knob back to it's original packaging. You wanna
buy it?

09-02-2011, 12:09 PM	#3 (permalink)
Juruki Track Member Join Date: Mar 2010 Location: SoCal Posts: 965 Drives: 370Z Tour/Sport/Navi Rep Power: 16	looks good! Just enough red not to make it look busy IMO Noob question: do you lose your front airbag when u do this mod? Is it safe? __________________ 09 370z - 7AT Volk Racing TE37SL / BC Coilovers / Berk HFC / TopSpeed CBE + Y-Pipe / Mines Spoiler

09-02-2011, 07:49 PM	#7 (permalink)
kevr6 A True Z Fanatic Join Date: Feb 2009 Location: N.W. Atlanta Posts: 1,515 Drives: '09 Graphite 370Z 6M Rep Power: 666	I had that steering wheel 3 cars ago. I liked how it felt. __________________ *Beware...* Daily Sliding In My ZLED!

09-02-2011, 08:36 PM	#8 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Nice setup. Looks great. I hope to have a Nardi wheel soon. How to you like the NRG short hub and quick release. I'm looking at that also. __________________

09-03-2011, 12:03 AM	#10 (permalink)
hdskull Track Member Join Date: Jun 2009 Location: San Diego Posts: 680 Drives: '10 Black 370Z 6MT Rep Power: 16	Looks good man! Glad it finally worked out for you! What did you do with the nismo knob? __________________ ^ Kenwood DDX616 \| Polk DB6501 \| Llumar 23% tint \| STi-R Clear Lens SSR Type-F \| F.I. 18" CF \| Stillen Gen 3 \| KW V3

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NISMO Titanium Shift Knob installed!!!!	FromG2Z	Exterior & Interior	190	08-24-2014 08:33 AM
Nismo Titanium Shift Knob Open-O Design Installed	karotZ	40th Anniversary 370Z	22	03-04-2011 03:58 PM
Weighted Shift Knob Installed	Minicobra1	Exterior & Interior	23	10-04-2010 10:47 AM
S2K Aluminum shift knob to replace OEM knob	initialgemini	Exterior & Interior	12	04-19-2009 02:56 PM
+ Forged Performance Shift Knob (Installed) +	batman_4	Exterior & Interior	16	04-13-2009 02:28 PM

09-02-2011, 11:52 AM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	try a srs reset and see if it goes away. i forget wat ohm to use but if it's too much it will blink, if it's too little it will blink as well.