Weighted Shift Knob Installed

Minicobra1 · 05-31-2009, 03:08 PM

I installed a TWM weighted shift knob from Canada, it's made a huge difference in shifting quality. This thing weighs 1.32 pounds! and is a bit shorter then the stock set up. I was running the Nismo one previously, which IMO is way too light, I use to mis-shift 1st to 2nd b/c of the effort it took to move it. Now I have no problems. I will upgrade to a short throw shifter later on, but I'm pretty satisfied for now. This would be a great edition to a short throw shifter.The model I got was the Desert Eagle & the color Is gun blue finish, which is actually more of a satin black.

kgreen · 05-31-2009, 03:22 PM

why so much damage on the stock knob?

rreign · 05-31-2009, 03:55 PM

Quote:

Originally Posted by kgreen

why so much damage on the stock knob?

Look through some other posts about changing out your shift knob. All of them look like this when they remove it because they put so much damn locktite on the OEM shift knob that you have to just grab hold with a wrench or vice-grips and give it your all.

Modshack · 05-31-2009, 04:57 PM

Quote:

Originally Posted by rreign

Look through some other posts about changing out your shift knob. All of them look like this when they remove it because they put so much damn locktite on the OEM shift knob that you have to just grab hold with a wrench or vice-grips and give it your all.

Yup...Pretty much count on trashing the stock knob to get it off...

Minicobra1 · 05-31-2009, 05:42 PM

Quote:

Originally Posted by rreign

Look through some other posts about changing out your shift knob. All of them look like this when they remove it because they put so much damn locktite on the OEM shift knob that you have to just grab hold with a wrench or vice-grips and give it your all.

Yep, after many attempts with a radiator hose and vice grips, that's what I did

and even then, it was still hard to unthread. Just make sure that you have someone help you so that you can hold the shaft with another set of vice grips.
You will be putting a lot of torque on it and don't want that transmitting through the stick down to the tranny.

kevr6 · 05-31-2009, 05:49 PM

Thanks for the info...just what I'm looking for now!

JDM_ED · 05-31-2009, 07:25 PM

Quote:

Originally Posted by kgreen

why so much damage on the stock knob?

There's probably no way on earth to remove the stock shift knob without damaging it, and it sucks because there is people around interested on buying it. I tried socks, shirt, a rubber strap, etc. and still the shiftknob looks all beaten up. But at the end, it makes you feel even better about your new shift knob, not matter how much you payed for it.

m4a1mustang · 05-31-2009, 07:28 PM

Quote:

Originally Posted by JDM_ED

There's probably no way on earth to remove the stock shift knob without damaging it, and it sucks because there is people around interested on buying it. I tried socks, shirt, a rubber strap, etc. and still the shiftknob looks all beaten up. But at the end, it makes you feel even better about your new shift knob, not matter how much you payed for it.

I want to reuse the stock knob with my short throw.

Minicobra1 · 05-31-2009, 08:40 PM

Quote:

Originally Posted by m4a1mustang

I want to reuse the stock knob with my short throw.

Good Luck, very slim chance you can get it off without damaging it

m4a1mustang · 05-31-2009, 08:49 PM

That really sucks. I might have to see if I can get a factory replacement then before I do the install. I don't like the feel of metal shifters.

m4a1mustang · 06-01-2009, 09:29 PM

Screw it. Decided I hate the stock knob.

How hot does that thing get?

CBRich · 06-01-2009, 10:11 PM

Someone in another thread stated that they were going to remove the shifter with their bare hands. I hope he posts a video.

SoCal 370Z · 06-01-2009, 10:13 PM

I gotta tell ya, the pit bull mauled version does have some appeal.

m4a1mustang · 06-01-2009, 10:23 PM

Quote:

Originally Posted by CBRich

Someone in another thread stated that they were going to remove the shifter with their bare hands. I hope he posts a video.

That was me. I already said no video because it would likely capture something embarrassing.

I'm sure I'm going to end up mauling it, so that's why I'm trying to order a new knob before I attempt an install. I think I'm going to go for a Voodoo Pearl knob like the one Modshack posted in another thread.

I need to order soon so I can have everything for this weekend.

antennahead · 06-01-2009, 11:21 PM

I heard stories like this with the 350 as well, funny thing is, mine (the 350), came right off easily, haven't tried to remove this one though.

John

05-31-2009, 05:49 PM	#6 (permalink)
kevr6 A True Z Fanatic Join Date: Feb 2009 Location: N.W. Atlanta Posts: 1,515 Drives: '09 Graphite 370Z 6M Rep Power: 666	Thanks for the info...just what I'm looking for now! __________________ *Beware...* Daily Sliding In My ZLED!

05-31-2009, 08:49 PM	#10 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	That really sucks. I might have to see if I can get a factory replacement then before I do the install. I don't like the feel of metal shifters. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

06-01-2009, 09:29 PM	#11 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Screw it. Decided I hate the stock knob. How hot does that thing get? __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

06-01-2009, 10:13 PM	#13 (permalink)
SoCal 370Z A True Z Fanatic Join Date: Feb 2009 Location: US of A Posts: 2,842 Drives: Answers Rep Power: 33	I gotta tell ya, the pit bull mauled version does have some appeal. __________________ ( Click to show/hide ) Why I NEVER say NO to the Panda Lou Fusz!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Install Shift Knob	Minicobra1	Nissan 370Z General Discussions	43	12-23-2009 06:31 AM
WTB OEM Shift Knob	bcarrollg35	Wanted	21	07-07-2009 02:48 AM
wtb oem 370z shift knob	bcarrollg35	Nissan 370Z General Discussions	8	05-09-2009 01:27 AM
S2K Aluminum shift knob to replace OEM knob	initialgemini	Exterior & Interior	12	04-19-2009 02:56 PM
+ Forged Performance Shift Knob (Installed) +	batman_4	Exterior & Interior	16	04-13-2009 02:28 PM

05-31-2009, 03:22 PM	#2 (permalink)
kgreen Enthusiast Member Join Date: Feb 2009 Location: EL Paso, Tx Posts: 387 Drives: SR 370z Rep Power: 243	why so much damage on the stock knob?

06-01-2009, 10:11 PM	#12 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	Someone in another thread stated that they were going to remove the shifter with their bare hands. I hope he posts a video.

06-01-2009, 11:21 PM	#15 (permalink)
antennahead A True Z Fanatic Join Date: Mar 2009 Location: Charleston, SC Posts: 15,181 Drives: '07 Z4 "M" Roadster Rep Power: 57	I heard stories like this with the 350 as well, funny thing is, mine (the 350), came right off easily, haven't tried to remove this one though. John