Custom NAVI installed in Cubby on 2011

FLORIDA370Z

I know alot of people have inquired about this..I tried to get that recessed look like the factory navi has.....I just bought a black 2011..I installed an add on navigation sytem using a GARMIN GVN-53 which is mounted under the passenger seat..I paid $600.. just for that...I removed the cubby and installed a touchscreen 7" LCD monitor..i paid $300..just for that.. in its place..What I did was I screwed a thin piece of wood and painted in black appox 8" X 4" up against the plastic rail pieces that run up and down that you see when u remove the cubby...Then using a headrest mount for the monitor I screwed that to the piece of wood. There were hooks and tabs sticking up on the A/C and head unit trim piece that i cut off and sanded smooth...then I bought a piece of black acrylic plastic approx 12 X 12"..i paid $10.00 for the plastic and glue...I took paper and made three templates from that. One template was of the lower piece that would be where the buttons would be on the factory navi..and made the other one to fit the left side which would also fit the right side to box it in.and the third for the top piece that would connect the left and right sides..For the bottom piece i used a heat gun to heat it up and bend and mold it to give it that curved shape to fit the trim piece that holds that A/C controls and surround the double din....After all the pieces were cut and shaped I used the acrylic glue and glued the curved piece to the A/C trim piece and reinstalled that piece on the car..This glue sets within 45min...after that I put the dash piece which had the A/C vents and ignition push button on[some slight sanding of the plastic had to be sanded down]..with that piece in place i slid the two side pieces in place and glued them onto the sides and the top piece..and reassembled the whole thing..It took me about 12 hours to do it all of a few nights of trial and error..The end result i think it looks as close to the factory look as possible and love it........any thoughts out there.....Brian

Attached Images

	370Z #9.JPG (50.3 KB, 175 views)
	370Z #10.JPG (39.8 KB, 104 views)
	370Z #11.JPG (50.6 KB, 149 views)

Carbon Fiber Element

Looks very nice man. Good job. But you should smooth it out and paint it black, looks kind of rough in the pics... or send it up to us and I'll do it in carbon fiber for you.

__________________
http://i329.photobucket.com/albums/l...2623_HDR-1.jpg
Text or call 732.754.0423
LIKE US ON FACEBOOK
Follow us on Instagram @Carbonfiberelement

Red__Zed

not bad. should look slick with a little bit of cleanup

370Z JT

Man I really like what you did. Wrap the entire console in CF would make it look oem.

__________________

FLORIDA370Z

i took those pics as i just finished the rough installation..It is black...ive have since smoothed it out and think im gonna wrap it in leather to match the dash.....not much of a fan of CF though...

FLORIDA370Z

I have a pioneer double din which is nav ready....but i wanted to do something really custom...I really dont like the flush look so i went with recessed look....The top monitor is not just a touchscreen for the nav but it also doubles as the monitor for my CAR PC...i m probablly gonna wrap it in leather to match the dash as well.....

Baer383

You know this is thread has been posted in 3 different section now.

__________________
2013 ZL1

754 rwhp 747 rwtq

FLORIDA370Z

i know.. ive had many PM's and questions ....just wanted to make sure it was in the three pertinent sections....thats all......

Baer383

I know you might want to make sure this isn't frowned upon.

I have seen Moderators get on people for this,since you maybe relatively new here I'm just giving you a heads up that's all.

__________________
2013 ZL1

754 rwhp 747 rwtq

FLORIDA370Z

yea i know...ive had alot of PM's and questions on it..just wanted to make sure it was in the three pertinent categories...thats all...

FLORIDA370Z

just trying to be helpful for those out there whom have that automobile customization bug in them who are looking for help and opions..Each one of the categories were pertinent to this..just trying to get the info out there..if someone frowns upon that then shame on them.....

Baer383

Be Careful with the cross posting is what I'm saying,you only place you need to put this is in the DIY section that is where people look to find how to do things here.

__________________
2013 ZL1

754 rwhp 747 rwtq

FLORIDA370Z

thanks for lookin out

bleufiend

A+ effort. Looks good.

__________________
Z34 owner formerly Z33. OZOC FTW.

kenchan

just take the entire trim off and send it off to get the new bezel, etc CF wrapped. then it will be seamless for the ultimate unique OEM look.

ps: can you take bigger pictures next time?