That one may have been, I know it went into a lot of detail like that but both are very good reads.

Yea, if you get a Katzkin leather interior... You keep the same functionality as the factory seats, but with a different look... Check out mine in the previous pages.. Or in my album...

Older Brides from my previous build, repainted in Chameleon Flair (the same as what I sprayed on the exterior). Both are on Bride rails, with Corbeau harnesses.

http://i234.photobucket.com/albums/e...7/4be33b4f.jpg
http://i234.photobucket.com/albums/e...7/c369cbc9.jpg
http://i234.photobucket.com/albums/e...7/2d09ae8b.jpg

Sexy

Thanks I have a set of Status Racing Harnesses sitting in my living room waiting for the car to come home to be installed

I m looking for the exact same set of seat... They are just amazing...
Can you tell me more about the fixation?? Did you have to change it??
And for what i see, they are without airbags??

They are on custom sliders so both me and my fiance (she's 5'2) can drive the car. Yes they are without airbags. One of the best seats I have ever sat in!

what are the most comfortable seats for BIG guys? 6'3" 270lbs

The recaros I have would be perfect for a guy your size!

Whats the model?

CS Sportster from Recaro USA

Ok, And by custom you mean that you made it?? So no chance to buy them??

Sorry for this stupide question but english is not my language;-)...

What about the airbag light?!? You made a bridge to clear it??!

Thanks for infos

Recaros

http://lh3.googleusercontent.com/-FV...DF667FB7CF.JPG

http://lh6.googleusercontent.com/-gc...02161AC16F.JPG

http://lh6.googleusercontent.com/-t5...E775D13B17.JPG

i believe they are modified bride rails

How was the head clearance?mines kinda small from having to use washers to keep the bottom of from hitting the bracket.

Really bad iPhone pics, but I figure something is better than nothing.


http://i29.photobucket.com/albums/c2...E/2131a934.jpg

http://i29.photobucket.com/albums/c2...E/d41448db.jpg

http://i29.photobucket.com/albums/c2...E/83b52bd9.jpg

http://i29.photobucket.com/albums/c2...E/27a92da5.jpg

http://i29.photobucket.com/albums/c2...E/9facbb31.jpg

http://i29.photobucket.com/albums/c2...E/6c24bd6d.jpg

http://i29.photobucket.com/albums/c2...E/85d734e8.jpg

http://i29.photobucket.com/albums/c2...E/1f18efac.jpg

http://i29.photobucket.com/albums/c2...E/b60699dc.jpg

Bride Straida II Venus Edition in my car o_O
http://farm8.staticflickr.com/7004/6...21615dd8_z.jpg
http://farm8.staticflickr.com/7030/6...fb8a3189_z.jpg
http://farm8.staticflickr.com/7023/6...303f2aff_z.jpg
http://farm8.staticflickr.com/7159/6...41642626_z.jpg

:eekdance:

They were made for your car! Matches the exterior colour like no other!

^^ the top secret rear bar would match your seats very well :tup:

damn those red Brides are s3x!!!!!!!!!

quote? :rolleyes:

lol yaaa i know!!

or the amuse one also xP i love them both but kinda pricey >_<

Was really stoked on the STATUS seats, but not sure how well their version of tan would match my tan interior. May have to just go black, problem with that is I only plan on getting, and only want, one bucket. I know that goes against the show car mentality but Im not buying a seat to be pretty :) Functionality FTW

Desicions......Desicions....

couldn't agree more...and they feel like it too. I had the pleasure of sitting in his car at the last Coffee and Cars meet.

I want...

this question is for people with red seat... how fast does your red seats get dirrt??

I had Corbeau FX1 pro in my 350Z.... After about an hour of driving my A$$ was killing me...

I have no problem spending the money but would the Bride or Status fixed back seat have any better cushioning? My wife hated the seats as well for long drives.

I need a small seat so the Status Ring or Bride Zeta III i like the best...

im getting a bucket and planning on using my stock seatbelt, but there's no way to mount the lock for the seatbelt. im getting a harness and harness bar eventually but not at the moment. any suggestions?

I can tell you first hand you sure can use your stock seat belt... It unbolts off the stock seat and I can tell you the buddy club sliders and corbeau have a welded on piece that the stock seat belt bolts onto.

I rocked my stock seat belts so your good to go with those slider brackets. And I am 99 percent sure the bride, nagisa and sparco brackets have welded on mounts for the stock seat belt.

Hope that helps brotha!

Thanks that really helps! :tup:

I have Bride rails, and yes, the tab is is there to bolt your stock seat belt to them.

Just an FYI be weary of which brackets you get! My corbeau brackets put my head close to the roof and i am 5'8!!

The buddy club rails put me back down to stock maybe a hair lower, the nagisa will do the same and put it lower as they are both side mount brackets.

Bride makes a rail that sits a little lower im not sure the height compared to stock....

Good luck man

Thanks!
I put the seat in without a bracket just to see the height, it was pretty comfortable. I hope the bracket doesn't add too much to it. Idk the brand of that bucket im going to get, but it's the lightest I could find.

If you go with a wedge engineering or corbeau bracket/slider that goes underneath the seat be ready to be sitting on a highchair... if You dont get side mounted brackets for the seat its going to be high...

I think the Bride Lo-max with the low bracket would be one of the few exceptions to this rule.

Good luck... I hope you didnt go to cheap with the seats... No name brands are not worth the extra cash savings...

Does anyone in the Houston area have a Status Ring GT? I would like to test sit one. :-)

Buy one so we all can test sit in it.

I think I'm about to order one if you want to come to Detroit to try it. :P I haven't had any luck with finding one to try. :(

I got my seat. the universal brackets come with the seat are too short. is there some kind of universal bracket long enough for the Z and has adjustable width?

Anyone know if there are any clearing issues with the bride euro ii?? Please helpcuz i want them, i had the sparco Chrono road but they didnt fit....
Thanks

Not the best pictures, but should give you an idea of the Bride euro II:
https://lh3.googleusercontent.com/-g...928_181850.jpg
https://lh5.googleusercontent.com/-y...928_181835.jpg
https://lh5.googleusercontent.com/-a...928_181842.jpg