350Z air ducts on 370Z ?

ChrisUR · 02-14-2011, 03:53 PM

I'm sorry if that questions has been already asked but I didnt find a post by using the search function - so if already answered please be kind enough to point me to the right thread.

I installed my STILLEN G3 recently and was wondering if its possible to use the 350Z late model air inducts for the 370Z front bumper.

On eBay for example I found
07 08 09 NISSAN 350Z VQ35HR DUAL CARBON INTAKE AIR DUCT - eBay (item 370472391506 end time Mar-05-11 22:54:34 PST)

as anyone tried if the angle of the 350Z and 370Z front bumper is a close match ? to me it looks quite similar but dont know for sure.

would be great to get some feedback before I order the set even though its quite cheap so if noone tried already I'm in for try-out.

Thanks,
Christian

XLR8SN · 02-14-2011, 03:58 PM

Send a PM to this guy:

Esprit Wing and Varis Airduct on White Nismo

He might be able to answer your question a little better. Its on a Nismo version....but similar in location I believe.

ChrisUR · 02-21-2011, 05:14 AM

ok, I have ordered the 350Z Dual Air Ducts listed above from eBay - will let you know once I have tried to install them !

christian370z · 02-21-2011, 10:34 AM

Not sure if that is the best idea in my opinion, what will you do if it rains? Getting water vapor into the intake stream can mess with the MAF sensors and create some start/drivability issues.

tonybui · 02-21-2011, 11:53 AM

Quote:

Originally Posted by christian370z

Not sure if that is the best idea in my opinion, what will you do if it rains? Getting water vapor into the intake stream can mess with the MAF sensors and create some start/drivability issues.

my friend's 350z has one air duct, I looked inside and it was designed for water to fall DOWN after it went in, not directly at the intake

Rulez · 01-21-2015, 09:40 PM

Sorry for the thread revival. Any feedback on this? I have a chance to get a pair of 350z air ducts and I want to be sure they will fit.

370Z JT · 01-22-2015, 11:39 AM

You have to cut about an inch off to make it fit if you have stillen G3 intakes.

bullitt5897 · 01-22-2015, 12:26 PM

You want air ducts that will put air into the bumper area for the intakes... You want to avoid putting direct air onto the filter. It has been tested locally to starve the intake by forcing air directly on the intakes. It causes a sort of air shield around the filter...

Below is my new intake duct installed with the bumper foam shaved to direct air into the bumper area. The cooling plate has also been removed.

bullitt5897 · 01-22-2015, 12:26 PM

The stillen intakes are just to the left and right of the nissan emblem.

02-14-2011, 03:53 PM	#1 (permalink)
ChrisUR Base Member Join Date: Jun 2010 Location: Germany Posts: 116 Drives: 370Z Black Edition Rep Power: 14	350Z air ducts on 370Z ? I'm sorry if that questions has been already asked but I didnt find a post by using the search function - so if already answered please be kind enough to point me to the right thread. I installed my STILLEN G3 recently and was wondering if its possible to use the 350Z late model air inducts for the 370Z front bumper. On eBay for example I found 07 08 09 NISSAN 350Z VQ35HR DUAL CARBON INTAKE AIR DUCT - eBay (item 370472391506 end time Mar-05-11 22:54:34 PST) as anyone tried if the angle of the 350Z and 370Z front bumper is a close match ? to me it looks quite similar but dont know for sure. would be great to get some feedback before I order the set even though its quite cheap so if noone tried already I'm in for try-out. Thanks, Christian __________________ ProStreet N1 exhaust \| ProStreet N1 Y-Pipe \| STILLEN G3 Intake \| NST Pulley Kit EIBACH Pro-Springs \| EIBACH Pro-Spacers \| EIBACH Sway Bars \| SEIBON GT2 Rear Wing MOCAL Oil Cooler 25row\| STILLEN TransCooler \| STILLEN PS Cooler \| STILLEN Front Fascia

02-21-2011, 05:14 AM	#3 (permalink)
ChrisUR Base Member Join Date: Jun 2010 Location: Germany Posts: 116 Drives: 370Z Black Edition Rep Power: 14	ok, I have ordered the 350Z Dual Air Ducts listed above from eBay - will let you know once I have tried to install them ! __________________ ProStreet N1 exhaust \| ProStreet N1 Y-Pipe \| STILLEN G3 Intake \| NST Pulley Kit EIBACH Pro-Springs \| EIBACH Pro-Spacers \| EIBACH Sway Bars \| SEIBON GT2 Rear Wing MOCAL Oil Cooler 25row\| STILLEN TransCooler \| STILLEN PS Cooler \| STILLEN Front Fascia

02-21-2011, 10:34 AM	#4 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 431	Not sure if that is the best idea in my opinion, what will you do if it rains? Getting water vapor into the intake stream can mess with the MAF sensors and create some start/drivability issues. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

01-22-2015, 11:39 AM	#7 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	You have to cut about an inch off to make it fit if you have stillen G3 intakes. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

01-22-2015, 12:26 PM	#8 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	You want air ducts that will put air into the bumper area for the intakes... You want to avoid putting direct air onto the filter. It has been tested locally to starve the intake by forcing air directly on the intakes. It causes a sort of air shield around the filter... Below is my new intake duct installed with the bumper foam shaved to direct air into the bumper area. The cooling plate has also been removed. SilverValk01 likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-14-2011, 03:58 PM	#2 (permalink)
XLR8SN Enthusiast Member Join Date: Jun 2009 Location: Hawaii Posts: 363 Drives: Nissan Rep Power: 15	Send a PM to this guy: Esprit Wing and Varis Airduct on White Nismo He might be able to answer your question a little better. Its on a Nismo version....but similar in location I believe.

01-21-2015, 09:40 PM	#6 (permalink)
Rulez Base Member Join Date: Oct 2013 Location: Orlando, FL Posts: 42 Drives: 2010 370Z Sport Rep Power: 11	Sorry for the thread revival. Any feedback on this? I have a chance to get a pair of 350z air ducts and I want to be sure they will fit.

01-22-2015, 12:26 PM	#9 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	The stillen intakes are just to the left and right of the nissan emblem. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
air ducts???	kdo2milger	ConceptZperformance	8	03-27-2012 11:53 PM
Ducts?	bigrob126	Nissan 370Z General Discussions	5	02-07-2011 05:53 PM
intake ducts	black09Z	Wanted	4	09-17-2009 07:37 AM
Track Video: Nissan 370Z vs 350Z (VQDE) vs 350Z HR (VQHR)	AK370Z	Track / Autocross / Drifting / Dragstrip	2	05-24-2009 08:33 PM
Mines MotorSports Front air ducts for Nissan 370Z Z34 01.08.09	AK370Z	Exterior & Interior	7	01-11-2009 01:52 PM