Power Window Help!!

PR370z · 11-26-2010, 02:57 PM

Finally the power window switch for the passeger door was replaced, and everything is working fine. There is a circuit board with some chips on the switch assy that control the auto functions of the power windows. So if ALL programming attempts fail (like in my case) you probably have a bad switch.

TreeSemdyZee · 11-26-2010, 03:59 PM

Quote:

Originally Posted by PR370z

Finally the power window switch for the passeger door was replaced, and everything is working fine. There is a circuit board with some chips on the switch assy that control the auto functions of the power windows. So if ALL programming attempts fail (like in my case) you probably have a bad switch.

Glad to hear they finallly got it fixed.

reechwuzhere · 04-13-2011, 09:07 PM

Quote:

Originally Posted by TreeSemdyZee

Actually, you're supposed to hold the button in the down position for a few seconds (you'll hear a click). Then close the window and hold in the up position. Only go to the first click. Don't go to the auto position on the switch. If this doesn't work, try a full reset. Hold the button in the down position for twenty seconds, then close the window and hold for another twenty. The most important is to not put the button to the auto position.
I did it a gazillion times this summer the resets always worked.

It's been an interesting week for me an my Z.. First the 1/4 tank fuel starve and today the windows flaked-out. This worked like a charm though, thanks guys !

Nismo221 · 04-13-2011, 09:13 PM

It sounds like your window motor just needs to be reset. I know from first hand experience if the battery is ever disconnected this happens. Try this, get in the car, roll the windows all the way down, then back up and continue holding up for about 5 seconds after the window reaches the top. You can do both windows at the same time or one at a time. Hope this fixes the problem. Keep us updated.

Nismo221 · 04-13-2011, 09:18 PM

sorry guess I should read to the bottom of the theard before posting lol. But if you ever have this problem this trick will work. The dealer told me on the phone it would take 2 hours to fix and cost $80-$100. When I went up there the mechanic showed me this trick!

kenchan · 04-14-2011, 07:13 AM

Yah whenever the switch control on the door is unplugged from its harness you need to do this.

ChrisSlicks · 04-14-2011, 07:18 AM

Quote:

Originally Posted by kenchan

Yah whenever the switch control on the door is unplugged from its harness you need to do this.

Some cars are smart and tell you on the display to reset the windows (and how to), ours, not so much.

Amazingz03 · 04-16-2011, 06:21 PM

I had the same problem today after i got my car back from the collision shop.. My driver side window wouldnt go up after i closed the door. I did the 5 sec reset and it worked like a charm. I love forums. 99.99999% of the time its better to do research here then go to a f-in dealership.

Nismo221 · 04-16-2011, 06:23 PM

Quote:

Originally Posted by Amazingz03

I had the same problem today after i got my car back from the collision shop.. My driver side window wouldnt go up after i closed the door. I did the 5 sec reset and it worked like a charm. I love forums. 99.99999% of the time its better to do research here then go to a f-in dealership.

and props to you for doing your research rather then just taking it straight to the dealer!

chuck62290 · 07-22-2011, 10:11 AM

Couldn't figure this out for a half hr after replacing my door speakers, i thought i would have to go to the dealer. Went on the forums and it took me less than 5 min. This forum is great.

EVOHUNTER · 07-22-2011, 01:41 PM

Door open, turn to " on " postion..close the door... roll the window down more than half way - roll it back up and hold for 5 seconds. then release

NismoZ370 · 07-25-2011, 01:22 PM

i unplugged the battery this weekend and i have this problem i will try the reset trick on my lunch break and am also glad i looked on here before going to the STEALERSHIP!

NismoZ370 · 07-25-2011, 05:19 PM

Quote:

Originally Posted by spearfish25

You say you tried everything. I assume you've done this:

Have the car turned off.
Press the ignition twice to get into ON mode, but don't depress the clutch (Don't start the car)
Using the window switch, fully lower each window and then fully raise it back up.
Push ignition once to turn off the ignition.
Start car normally, windows should be reprogrammed.

Tried this version of reset and it worked like a charm thanks guys

seyjames · 08-07-2014, 11:17 AM

Just wanted to say thanks to spearfish25 and ChrisSlicks! My passenger side window wasn't going up on auto, but using that technique, the problem was resolved inside a minute! Great advice!!!

11-26-2010, 02:57 PM	#16 (permalink)
PR370z Base Member Join Date: Jun 2010 Location: Puerto Rico Posts: 108 Drives: 2008 BMW E60 M5 Rep Power: 14	Finally the power window switch for the passeger door was replaced, and everything is working fine. There is a circuit board with some chips on the switch assy that control the auto functions of the power windows. So if ALL programming attempts fail (like in my case) you probably have a bad switch. __________________ MODS:293 Whp/ 246 Tq K&N drop ins, ERZ HFC, JIC-Magic Y Pipe, HPS post MAF tubes, Nismo shift knob, 30% tints, JDM rear fog light more to come!

04-13-2011, 09:13 PM	#19 (permalink)
Nismo221 Enthusiast Member Join Date: Sep 2010 Location: Decatur, Alabama Age: 35 Posts: 489 Drives: 2010 370z Nismo Rep Power: 14	It sounds like your window motor just needs to be reset. I know from first hand experience if the battery is ever disconnected this happens. Try this, get in the car, roll the windows all the way down, then back up and continue holding up for about 5 seconds after the window reaches the top. You can do both windows at the same time or one at a time. Hope this fixes the problem. Keep us updated. __________________ Stillen Gen 3, Motordyne M370 Intake Manifold, 25 row oil cooler, Z1 test pipes, Greddy Ti-C 70mm dual exhaust, 15mm front/20mm rear spacers, RE-11's, V1 detector, LED interior lights, LED tag lights, Password JDM CF engine and radiator cooling covers.

04-13-2011, 09:18 PM	#20 (permalink)
Nismo221 Enthusiast Member Join Date: Sep 2010 Location: Decatur, Alabama Age: 35 Posts: 489 Drives: 2010 370z Nismo Rep Power: 14	sorry guess I should read to the bottom of the theard before posting lol. But if you ever have this problem this trick will work. The dealer told me on the phone it would take 2 hours to fix and cost $80-$100. When I went up there the mechanic showed me this trick! __________________ Stillen Gen 3, Motordyne M370 Intake Manifold, 25 row oil cooler, Z1 test pipes, Greddy Ti-C 70mm dual exhaust, 15mm front/20mm rear spacers, RE-11's, V1 detector, LED interior lights, LED tag lights, Password JDM CF engine and radiator cooling covers.

04-16-2011, 06:21 PM	#23 (permalink)
Amazingz03 Base Member Join Date: Aug 2010 Location: Sacramento County Posts: 78 Drives: 09 370z Grey MT Rep Power: 14	I had the same problem today after i got my car back from the collision shop.. My driver side window wouldnt go up after i closed the door. I did the 5 sec reset and it worked like a charm. I love forums. 99.99999% of the time its better to do research here then go to a f-in dealership. __________________ \| 2009 PG 370Z \| 6 MT \| 2015 Nismo front conversion \| Couture Vortex side/rear skirt \| Custom Exhaust \| Godspeed fully adjustable coil overs \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Window Issue. Anyone else?	In2Deep	Exterior & Interior	19	04-06-2018 11:53 AM
Help: Adjusting/aligning window (need more help than just window-reset procedure)	k.alexander	Exterior & Interior	7	03-01-2013 08:12 AM
Passenger Side Power Window Problem	Robert_Nash	Nissan 370Z Roadster (Convertible)	28	10-14-2011 10:31 PM
window issues	redroadster10	Nissan 370Z General Discussions	4	05-09-2010 05:21 PM
Various nissan models; power window “auto up” initialization	AK370Z	370Z Technical Service Bulletins (TSB) / Recalls	0	02-08-2010 10:17 PM

04-14-2011, 07:13 AM	#21 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	Yah whenever the switch control on the door is unplugged from its harness you need to do this.

07-22-2011, 10:11 AM	#25 (permalink)
chuck62290 Base Member Join Date: Jun 2011 Location: LI NY Posts: 10 Drives: 2011 370z white 6M Rep Power: 14	Couldn't figure this out for a half hr after replacing my door speakers, i thought i would have to go to the dealer. Went on the forums and it took me less than 5 min. This forum is great.

07-22-2011, 01:41 PM	#26 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	Door open, turn to " on " postion..close the door... roll the window down more than half way - roll it back up and hold for 5 seconds. then release

07-25-2011, 01:22 PM	#27 (permalink)
NismoZ370 Track Member Join Date: Nov 2010 Location: Clarksville, TN Posts: 711 Drives: a GTR soon! Rep Power: 15	i unplugged the battery this weekend and i have this problem i will try the reset trick on my lunch break and am also glad i looked on here before going to the STEALERSHIP!

08-07-2014, 11:17 AM	#29 (permalink)
seyjames Base Member Join Date: Jul 2014 Location: On a boat Posts: 1 Drives: 2009 370Z Touring Rep Power: 10	Just wanted to say thanks to spearfish25 and ChrisSlicks! My passenger side window wasn't going up on auto, but using that technique, the problem was resolved inside a minute! Great advice!!!