Stillen Front Bumper (v2) Detailed Pictures

XwChriswX · 07-19-2010, 04:53 PM

Quote:

Originally Posted by wretched_z

Here is a pic of my Z with it.

Forgestar wheels?
S-Tune Spoiler?

Factory Red or repainted?

wretched_z · 07-19-2010, 04:59 PM

I got the V1, I had the same problems that you had. I am really good friends with the owner of the body and we worked on it after hours. The biggest problem I had was with bubbling under the headlights we made small metal bracket and fastened them to the bubbling part to stop it. Then we had to cut, trim and reattach stuff to make things fit right. It was a huge PITA! I got a good buddy discount, I just had to pay for mats so Im not sure much a shop would charge.

wretched_z · 07-19-2010, 05:01 PM

Forgestar wheels
S tune spoiler
and factory solid red with a little photoshop effect on the color

XwChriswX · 07-19-2010, 05:07 PM

Quote:

Originally Posted by wretched_z

Forgestar wheels
S tune spoiler
and factory solid red with a little photoshop effect on the color

I was about to say lol That looks awesome!

Can you PS it with a Blue color with the same effect by chance?

Kyle@STILLEN · 07-19-2010, 05:14 PM

As Caravanshaka has mentioned we have issued a call tag and will be returning his fascia. As soon as that fascia arrives we will be installing it on one of our cars and video taping the entire process.

I just came back in from the shop where I had the modeling shop guys test fit one of the fascias that we pulled off the shelves this morning. It took a bit of time obviously to remove the factory fascia and the windshield washer bottle but the actual installation of the fascia took between 15-30 seconds. I recorded the installation from start to finish and also included some talking with instructions on some of the key points just to clear up any confusion. In my opinion the fit is perfect. As soon as we install the final clips and bolts everything will be tight and in its perfect mounting location. You will see this video before the end of the day.

Quote:

Originally Posted by Caravanshaka

I kinda figured he'd offer to send me a second set of "ears" to test, which I probably would have done just to do my due diligence.

I did consider this option however there is no point. At the end of the day those pieces come out of a mold and the parts are all the same. New ears would have made no difference.

Quote:

Originally Posted by wretched_z

I got the V1, I had the same problems that you had. I am really good friends with the owner of the body and we worked on it after hours. The biggest problem I had was with bubbling under the headlights we made small metal bracket and fastened them to the bubbling part to stop it. Then we had to cut, trim and reattach stuff to make things fit right. It was a huge PITA! I got a good buddy discount, I just had to pay for mats so Im not sure much a shop would charge.

The bubbling issue in the front of the head light was definitely a big headache and one that we are very disappointed in. I'm sorry that you experienced such a hassle in making it fit correctly. For the V. 2 we added some extra length to the area under the headlight which will keep that strength there and maintain its structure.

XwChriswX · 07-19-2010, 05:25 PM

Quote:

Originally Posted by Kyle@STILLEN

I did consider this option however there is no point. At the end of the day those pieces come out of a mold and the parts are all the same. New ears would have made no difference.

Wouldn't this be a good thing to try, just to Confirm the point that they are All the same?

Just trying to think of ways to minimize all the variables...

wretched_z · 07-19-2010, 05:35 PM

Quote:

Can you PS it with a Blue color with the same effect by chance?

I dont have PS, the guy that did the photoshoot did it, sorry

XwChriswX · 07-19-2010, 05:37 PM

Quote:

Originally Posted by wretched_z

I dont have PS, the guy that did the photoshoot did it, sorry

Ahh, k.

Mike · 07-19-2010, 05:47 PM

Quote:

Originally Posted by XwChriswX

Wouldn't this be a good thing to try, just to Confirm the point that they are All the same?

Just trying to think of ways to minimize all the variables...

He said they are going to install caravans bumper on their car, same end result and caravan gets his money back

Caravanshaka · 07-19-2010, 05:52 PM

Kyle,

Just want you to know that I want this bumper to fit just as much as you do. If the video you release somehhlow shows some different way of installing it that works, I will be happy to try it out if you think it will make a difference.

m4a1mustang · 07-19-2010, 05:54 PM

Quote:

Originally Posted by Caravanshaka

Kyle,

Just want you to know that I want this bumper to fit just as much as you do. If the video you release somehhlow shows some different way of installing it that works, I will be happy to try it out if you think it will make a difference.

It IS a very, very good looking bumper after all.

Kyle@STILLEN · 07-19-2010, 06:16 PM

Caravan-I don't know what might be causing your issues. It could be a component of the Injen intake? I hope these video's help...

Here is one of the video's...

Caravanshaka · 07-19-2010, 06:18 PM

Link gave me errors kyle

Kyle@STILLEN · 07-19-2010, 06:24 PM

Quote:

Originally Posted by Caravanshaka

Link gave me errors kyle

Really? It worked for me when I previewed it...I hope this direct link works, I'm not very good with computers so I wouldn't be surprised if I did something wrong.

Video 1:
YouTube - MVI_7810.AVI

Video 2:
YouTube - MVI_7812.wmv

Caravanshaka · 07-19-2010, 06:30 PM

Yup, not doing anything different. I wish mine fit like that, but it doesn't.

07-19-2010, 05:52 PM	#100 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	Kyle, Just want you to know that I want this bumper to fit just as much as you do. If the video you release somehhlow shows some different way of installing it that works, I will be happy to try it out if you think it will make a difference. __________________ ____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

07-19-2010, 06:18 PM	#103 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	Link gave me errors kyle __________________ ____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

07-19-2010, 06:30 PM	#105 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	Yup, not doing anything different. I wish mine fit like that, but it doesn't. __________________ ____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Stillen Front Bumper and Sideskirts	tazma61	Parts for sale (Private Classifieds)	25	07-07-2010 02:10 AM
Front Bumper	CrownR426	Wanted	0	04-01-2010 08:40 PM
Holes in front bumper!!!	alexpila	Exterior & Interior	20	03-17-2010 02:58 PM
Front Bumper / Front Vents / Aerodynamical goodies	SpawnAeroJohn	Exterior & Interior	94	01-24-2010 06:27 AM
CF Front Bumper	speedworks	Exterior & Interior	16	12-29-2009 07:01 PM

07-19-2010, 04:59 PM	#92 (permalink)
wretched_z Base Member Join Date: Apr 2009 Location: Rogers, AR Posts: 63 Drives: 09 370z Rep Power: 16	I got the V1, I had the same problems that you had. I am really good friends with the owner of the body and we worked on it after hours. The biggest problem I had was with bubbling under the headlights we made small metal bracket and fastened them to the bubbling part to stop it. Then we had to cut, trim and reattach stuff to make things fit right. It was a huge PITA! I got a good buddy discount, I just had to pay for mats so Im not sure much a shop would charge.

07-19-2010, 05:01 PM	#93 (permalink)
wretched_z Base Member Join Date: Apr 2009 Location: Rogers, AR Posts: 63 Drives: 09 370z Rep Power: 16	Forgestar wheels S tune spoiler and factory solid red with a little photoshop effect on the color

07-19-2010, 06:16 PM	#102 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 306	Caravan-I don't know what might be causing your issues. It could be a component of the Injen intake? I hope these video's help... Here is one of the video's...