EVO-R Carbon Fiber front lip - Preview Teaser

NewYorkJon34 · 08-18-2010, 12:07 PM

Well it's already paid for soo let him try

NewYorkJon34 · 08-18-2010, 11:12 PM

EVO-R, I thought you were going to email me those pics today, what happened?

Jamaica · 08-19-2010, 12:31 AM

hes prob sleeping.

EVOR · 08-19-2010, 05:30 AM

Guys I want to make this install as detail as possible. Cuz if you don't do it right one of other parts will not fit right. First I put on 3M double sides on the center bumper. (Make sure youe have clean the surface before this) Follow the line of the bumper. This is important.

Make the center top edge of the font lip line up with 3Mdouble side line. Then put on the sides of the center lip part. Make sure push in hard so that there will be no gaps. Use the provided screw screw on the bottom part.

Put on 3M double side on the edge top of the side lip cover.

Alos put ome on the area where it meets the center lip.
Line up with factory bumper line for the lower lip. You will see how it flows. Do the center section first so that the cover will colse with the bumper with no gap.
[img]http://a.imageshack.us/img153/4522/img4027c.jpg[/img[
The do the sides. If you see your edges of the bumper and the side cover has a gap, that means you did not line up correctly, push the sode cover more to the center. Screw 2 screws on the edge of the side cover to the bumper.

Screw on the bottom section of the side cover.

Do the same for the other side. Does not matter which side you do it first. Main point is when you put them on make sure there is no gaps and follow the line of the bumper.

chuckd05 · 08-19-2010, 02:42 AM

haha nah I dont steal... I just want to see it on a car ASAP ....

EVOR · 08-19-2010, 05:46 AM

Pics of detail installed

EVOR · 08-19-2010, 05:48 AM

EVOR · 08-19-2010, 05:51 AM

metz · 08-19-2010, 06:16 AM

You need to put the tape lower so its not so visible. Other than that, whens it gonna ship?

EVOR · 08-19-2010, 06:50 AM

Yea, cuz some people might mistake that there is a small gap. So I want to show its a 3M double side on it. =)

kenchan · 08-19-2010, 06:58 AM

The contour on the fender arch side where the lip wraps around...does not match contour of the stock arch.

Other then that, I think it looks pretty good.

GingaBreadMan · 08-19-2010, 07:56 AM

Interested in just the carbon fiber lip but not the entire nose, is that available?

EVOR · 08-19-2010, 08:07 AM

This is just the lip I'm selling. The nose is stock.

NewYorkJon34 · 08-19-2010, 09:23 AM

So if I use thinner tape then it should look even better correct? Why does that front carbon lip look like it has spots?

RedZed34 · 08-19-2010, 09:52 AM

EVO-R, I thought the lip was going to be a 1 piece carbon fiber lip? Is that still going to happen in the final production?

08-19-2010, 05:30 AM	#4 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 46	Guys I want to make this install as detail as possible. Cuz if you don't do it right one of other parts will not fit right. First I put on 3M double sides on the center bumper. (Make sure youe have clean the surface before this) Follow the line of the bumper. This is important. Make the center top edge of the font lip line up with 3Mdouble side line. Then put on the sides of the center lip part. Make sure push in hard so that there will be no gaps. Use the provided screw screw on the bottom part. Put on 3M double side on the edge top of the side lip cover. Alos put ome on the area where it meets the center lip. Line up with factory bumper line for the lower lip. You will see how it flows. Do the center section first so that the cover will colse with the bumper with no gap. [img]http://a.imageshack.us/img153/4522/img4027c.jpg[/img[ The do the sides. If you see your edges of the bumper and the side cover has a gap, that means you did not line up correctly, push the sode cover more to the center. Screw 2 screws on the edge of the side cover to the bumper. Screw on the bottom section of the side cover. Do the same for the other side. Does not matter which side you do it first. Main point is when you put them on make sure there is no gaps and follow the line of the bumper. __________________ WWW.EVO-R.NET Last edited by EVOR; 08-19-2010 at 05:43 AM.

08-19-2010, 02:42 AM	#5 (permalink)
chuckd05 A True Z Fanatic Join Date: Oct 2009 Location: NY Posts: 2,391 Drives: No longer a Z Rep Power: 21	haha nah I dont steal... I just want to see it on a car ASAP .... __________________ 09 370Z 6M PW - FBO Best 1/4 mile = 12.926 @ 109 SOLD -- 08 BMW 135i - FBO 12.1@120mph SOLD -- white 09 e92 335 Coupe Mtech - 11.9 @ 119 :-)

08-19-2010, 05:46 AM	#6 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 46	Pics of detail installed __________________ WWW.EVO-R.NET

08-19-2010, 05:48 AM	#7 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 46	__________________ WWW.EVO-R.NET

08-19-2010, 05:51 AM	#8 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 46	__________________ WWW.EVO-R.NET

08-18-2010, 12:07 PM	#1 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1067	Well it's already paid for soo let him try

08-18-2010, 11:12 PM	#2 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1067	EVO-R, I thought you were going to email me those pics today, what happened?

08-19-2010, 12:31 AM	#3 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 75	hes prob sleeping.

08-19-2010, 06:16 AM	#9 (permalink)
metz Enthusiast Member Join Date: Mar 2010 Location: Baton Rouge Posts: 347 Drives: 05 Roush, 2010 40th Rep Power: 17	You need to put the tape lower so its not so visible. Other than that, whens it gonna ship?

08-19-2010, 06:50 AM	#10 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 46	Yea, cuz some people might mistake that there is a small gap. So I want to show its a 3M double side on it. =) __________________ WWW.EVO-R.NET

08-19-2010, 06:58 AM	#11 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	The contour on the fender arch side where the lip wraps around...does not match contour of the stock arch. Other then that, I think it looks pretty good.

08-19-2010, 07:56 AM	#12 (permalink)
GingaBreadMan Enthusiast Member Join Date: Jun 2009 Location: New York Posts: 313 Drives: 09 370z Sport 6spd Rep Power: 18	Interested in just the carbon fiber lip but not the entire nose, is that available? __________________ ClearBra/Debadging/Tinted Head & Taillights Coming Soon:180° Customs Headlights/ISS Forged Spyder 19" 265*305/Swift Springs/STS Rear Mount Turbo

08-19-2010, 08:07 AM	#13 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 46	This is just the lip I'm selling. The nose is stock. __________________ WWW.EVO-R.NET

08-19-2010, 09:23 AM	#14 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1067	So if I use thinner tape then it should look even better correct? Why does that front carbon lip look like it has spots?

08-19-2010, 09:52 AM	#15 (permalink)
RedZed34 Base Member Join Date: Oct 2009 Location: Connecticut Posts: 155 Drives: 09 370Z SR Sport Pkg Rep Power: 17	EVO-R, I thought the lip was going to be a 1 piece carbon fiber lip? Is that still going to happen in the final production?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
carbon fiber front liecense area cover	darkseed	Nissan 370Z General Discussions	9	03-05-2010 06:55 AM
Carbon Fiber front fascia?	kannibul	Exterior & Interior	21	09-30-2009 01:19 AM
Sneak Peak, Carbon Fiber Front Lip, From The 370ZSOURCE!!!!	Michael@TheZStore	Exterior & Interior	31	04-19-2009 12:51 PM