Stillen bumper arrived today!!!!!!!

Mike · 04-27-2010, 07:12 PM

Quote:

Originally Posted by Kyle@STILLEN

I'm guessing the flash of the camera has a lot to do with that. I had a 2005 Nissan Titan with a mesh grill and intercooler behind it. Driving around town or just taking normal pictures you could not see the intercooler. Get that flash in there and the grill looked like wax paper and you could see straight through it...It was really weird..

thats exactly what I was thinking. When are the side grills going to be avail?

LiquidZ · 04-27-2010, 08:54 PM

This fascia looks awesome. Thanks for posting pics Mike.

Marco_xyz · 04-27-2010, 09:20 PM

Quote:

Originally Posted by Mike

OK, so I won't get the car back today

Its got an airbag light they are going to have to have nissan extinguish for them, as they tried their tool and a neighboring shops reset tool, and neither work. Nissan said its common on the 370z, so they have to fix it.

Hey Mike, I had the same problem... try this out before you go and spend money to reset it! It worked for me!

Flashing Airbag Light After HU Install

Mike · 04-27-2010, 10:12 PM

Quote:

Originally Posted by Marco@MRWorks

Hey Mike, I had the same problem... try this out before you go and spend money to reset it! It worked for me!

Flashing Airbag Light After HU Install

Damn, I totally forgot about that. I had to do that when I installed my HU also. They will be paying for it, as it wasn't on when I dropped it, but I am going to get with them first thing on this tomorrow.

HKYStormFront · 04-27-2010, 10:39 PM

yup if the "key on" is activated with anything involving the air bag system unplugged it will fault and that's the quick way to get it to figure out everything's fine once you hook everything back up. i had to do this when i put in my D3 and then again a few weeks ago when i forgot to hook up the passenger seat after taking both out for cleaning. works like a champ

it's the same for frontier's, just with Key On, Engine Off cycles instead of the push button thing

Lemers · 04-28-2010, 12:06 AM

Concerning the big gaping hole in the front. Josh from stillen did say in the announcement that stillen would be making a modular fang piece that will function as brake ducts. That will go a long way to fill the hole.

Josh@STILLEN · 04-28-2010, 12:31 AM

Definitely.. and remember too the one shot is at ground level.. which you're virtually never at.. and Kyle mentioned the flash potentially eliminating any mesh.

Also remember the point of this fascia, from our design beginnings.. function

The amount of airflow this fascia provides, both with the large opening in the front, the scoops on the sides and coolers, the diversion path below the top of the opening to Gen 3's, supercharger, as well as the modular ducting soon available for brake ducting...

But it looks fantastic Mike.. can't wait to see some real world pics once you get it back..

Mike · 04-28-2010, 08:01 AM

Quote:

Originally Posted by Josh@STILLEN

But it looks fantastic Mike.. can't wait to see some real world pics once you get it back..

I can't wait for your brake ducting kit!!!!!

HKYStormFront · 04-28-2010, 08:09 AM

Quote:

Originally Posted by Josh@STILLEN

But it looks fantastic Mike.. can't wait to see some real world pics once you get it back..

we're working on that, stay tuned kyle

G Fo12ce · 04-28-2010, 09:41 AM

I really like it a lot.

The only thing I would have changed (and maybe this is a little nit pick) if I were Stillen is how much it tappers in as you go from the fender to the bottom lip. What I love about the Nismo facia is how vertically it goes straight down when you look at it from the front giving the car a wider look. You don't see any tire from the front view. But again that looks awesome.

phelan · 04-28-2010, 11:15 AM

looks like it's screaming or something

Vegitto-kun · 04-28-2010, 01:46 PM

When I saw that mouth

I couldn't resist

vipor · 04-28-2010, 02:19 PM

that's a win right THAR

kenchan · 04-28-2010, 02:22 PM

i keep seeing new avatars on phalen's handle, yet no pict of this stillen bumper installed...

jmlenz · 04-28-2010, 02:41 PM

Curious as to if the Injen CAI would place the filters right in prime airflow of the side scoops? If so, that would gove the Injens an advantage even over the G3s in terms of ambient air exposure.

04-27-2010, 08:54 PM	#107 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 704	This fascia looks awesome. Thanks for posting pics Mike. __________________

04-27-2010, 10:39 PM	#110 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	yup if the "key on" is activated with anything involving the air bag system unplugged it will fault and that's the quick way to get it to figure out everything's fine once you hook everything back up. i had to do this when i put in my D3 and then again a few weeks ago when i forgot to hook up the passenger seat after taking both out for cleaning. works like a champ it's the same for frontier's, just with Key On, Engine Off cycles instead of the push button thing __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

04-28-2010, 12:06 AM	#111 (permalink)
Lemers A True Z Fanatic Join Date: Mar 2010 Location: Izmir, Turkey Posts: 15,371 Drives: 2012 Traverse LTZ Rep Power: 52	Concerning the big gaping hole in the front. Josh from stillen did say in the announcement that stillen would be making a modular fang piece that will function as brake ducts. That will go a long way to fill the hole. __________________ 2010 Black Cherry Touring/Sport/Nav Now - 2012 Travese LTZ until I leave for Turkey

04-28-2010, 09:41 AM	#115 (permalink)
G Fo12ce Premium Member Join Date: Nov 2009 Location: Socal Posts: 996 Drives: Sold! Rep Power: 51	I really like it a lot. The only thing I would have changed (and maybe this is a little nit pick) if I were Stillen is how much it tappers in as you go from the fender to the bottom lip. What I love about the Nismo facia is how vertically it goes straight down when you look at it from the front giving the car a wider look. You don't see any tire from the front view. But again that looks awesome. __________________ Nismo Suspension: New Owners Check Here!

04-28-2010, 11:15 AM	#116 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	looks like it's screaming or something __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

04-28-2010, 12:31 AM	#112 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 533	Definitely.. and remember too the one shot is at ground level.. which you're virtually never at.. and Kyle mentioned the flash potentially eliminating any mesh. Also remember the point of this fascia, from our design beginnings.. function The amount of airflow this fascia provides, both with the large opening in the front, the scoops on the sides and coolers, the diversion path below the top of the opening to Gen 3's, supercharger, as well as the modular ducting soon available for brake ducting... But it looks fantastic Mike.. can't wait to see some real world pics once you get it back..

04-28-2010, 01:46 PM	#117 (permalink)
Vegitto-kun A True Z Fanatic Join Date: Feb 2010 Location: USA Posts: 2,011 Drives: 09 370Z Rep Power: 262	When I saw that mouth I couldn't resist

04-28-2010, 02:19 PM	#118 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 41 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 48	that's a win right THAR __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

04-28-2010, 02:22 PM	#119 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	i keep seeing new avatars on phalen's handle, yet no pict of this stillen bumper installed...

04-28-2010, 02:41 PM	#120 (permalink)
jmlenz Track Member Join Date: May 2009 Location: San Diego Posts: 645 Drives: a car Rep Power: 643	Curious as to if the Injen CAI would place the filters right in prime airflow of the side scoops? If so, that would gove the Injens an advantage even over the G3s in terms of ambient air exposure.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Z Has Arrived!	370er	Australia/New Zealand	14	10-01-2009 09:33 PM
Arrived early	havasuwiley	New 370Z Owner	4	08-01-2009 11:54 AM
New Advan RS-D's arrived!!!!	370Ztune	Wheels & Tires	9	07-22-2009 05:32 PM
AntiTheft system arrived today	grahfz	The Lounge (Off Topic)	16	07-06-2009 10:27 PM
It has arrived...how can i sleep?	ZEDHEAD	Canada	6	04-16-2009 06:16 PM