ProClip 370Z Mount + Droid Holster review

Menace370Z · 07-12-2013, 11:29 AM

Anyone use the ProClip Mount for a Samsung S4? I was looking at this one online, I have a Spigen SlimArmor case.

Samsung Galaxy S4 Medium Universal Adjustable Holder for devices with a Case*-*ProClip USA

Menace370Z · 07-20-2013, 12:24 AM

Quote:

Originally Posted by m4a1mustang

Like many of you, I was very tired of keeping my phone in my cup holder. Having experience with ProClip mounts, I decided to give their 370Z unit a try. I ordered the passenger side knee pad mount ($29.99) and the Holster with Tilt Swivel & Car Mount Magnet ($34.99) for my Droid.

As with the ProClip mount I used in my last car, I decided not to peel the covers off the 3M adhesive tape so that I could remove it whenever necessary. Don't worry, the mount clips in there very solidly and WILL NOT move around! No tape needed.

Here are the pics:

Don't worry about it being a problem for your passengers... there's still plenty of leg room for them with the mount installed.

Worth the money? Definitely. Solid piece and it's MUCH better having the phone in a fixed position freeing up the cup holder.

My apologies for the dirty interior -- I will be taking care of that during my spring detail.

I just got my ProClip and have a question about how your bottom clip attaches. Mine doesn't fully wrap around the bottom edge of the center console. Instead the ProClip bracket goes about half way around the bottom edge and the U shaped attachment isn't wide enough to fully go around the bottom of the console. It is secure, but I am worried the sharp edge of the ProClip bracket will eventually wear a hole in the center console material. Is this how it is supposed to fit?

370_o · 04-03-2015, 11:42 PM

I was inspired by this thread and thought I'd share my recent project. I liked the ProClip holder but didn't much care for the mounts as they look a bit kluged together in my opinion. I decided to make a custom one and started playing with some fiberglass. Here's the result.

kenchan · 04-04-2015, 10:44 PM

nice job! looks better than proclip.

370_o · 04-05-2015, 10:26 PM

Thanks!

m4a1mustang · 04-05-2015, 11:31 PM

Quote:

Originally Posted by 370_o

I was inspired by this thread and thought I'd share my recent project. I liked the ProClip holder but didn't much care for the mounts as they look a bit kluged together in my opinion. I decided to make a custom one and started playing with some fiberglass. Here's the result.

Nice work!

MNYKS · 04-25-2015, 11:04 AM

Quote:

Originally Posted by 370_o

I was inspired by this thread and thought I'd share my recent project. I liked the ProClip holder but didn't much care for the mounts as they look a bit kluged together in my opinion. I decided to make a custom one and started playing with some fiberglass. Here's the result.

I need one please?

darkphantom · 05-01-2015, 11:52 AM

https://www.youtube.com/watch?v=CnEksmuCn4E

anyone know of anything like this? I really don't want a windshield mount of navigation, and these other clips are too low.

Zbrah · 05-18-2015, 03:26 PM

Quote:

Originally Posted by darkphantom

https://www.youtube.com/watch?v=CnEksmuCn4E

anyone know of anything like this? I really don't want a windshield mount of navigation, and these other clips are too low.

Try this one. I used it in my 370 a little bit. It's very sturdy and it sits at the right location without having to look down if you're using the gps. It may look like it's blocking the cubby door, but it's not, I can still use the cubby door while my iphone is mounted on the clip.

Koomus CD-Air CD Slot Universal Smartphone Car Mount Holder Cradle

Gerg · 05-18-2015, 10:25 PM

Quote:

Originally Posted by 370_o

I figure pairing either of the proclip iOauto (standard or pro) magnet attachment with this base would be the best of all possible worlds.

If 370_o decides to do a run of them, count me first in line.

370_o · 05-19-2015, 12:03 PM

Ok, I give in. I'll make a small run of the one piece design that I posted. I'm also planning on creating a two piece design that's easier to install. PM me if you're interested.

I'm sure the Mods will let me know how/where to post in the future now that I plan on selling these things...

nismo13807 · 05-19-2015, 02:29 PM

^^ dam you... i just ordered a proclip last week...

MNYKS · 05-21-2015, 06:04 PM

Quote:

Originally Posted by Zbrah

Try this one. I used it in my 370 a little bit. It's very sturdy and it sits at the right location without having to look down if you're using the gps. It may look like it's blocking the cubby door, but it's not, I can still use the cubby door while my iphone is mounted on the clip.

Koomus CD-Air CD Slot Universal Smartphone Car Mount Holder Cradle

Post some pictures of this in your Z? Please!

MrTwo94 · 05-28-2015, 10:05 AM

Quote:

Originally Posted by Zbrah

Try this one. I used it in my 370 a little bit. It's very sturdy and it sits at the right location without having to look down if you're using the gps. It may look like it's blocking the cubby door, but it's not, I can still use the cubby door while my iphone is mounted on the clip.

Koomus CD-Air CD Slot Universal Smartphone Car Mount Holder Cradle

This seems like the way to go. I've been meaning to get a mount so I'm glad I saw this thread which reminded me, so I just ordered this ($20 on amazon, $25 on their website). Much easier to add/remove than the proclip style and just looks cleaner while in use. Also, great reviews on Amazon from a ton of users.

Zbrah · 05-28-2015, 01:34 PM

Quote:

Originally Posted by MNYKS

Post some pictures of this in your Z? Please!

Sorry! I only had the one picture when I borrowed it from my sister to test out. I can tell you that it is the perfect solution for the Z. Its position is right about eye level if you're using your phone gps and it's within reach if needed, and I was still able to open and close my cubby door with it being mounted

04-03-2015, 11:42 PM	#33 (permalink)
370_o Base Member Join Date: Jul 2013 Location: Santa Monica, CA Posts: 51 Drives: 2013 370Z Sport M6 Rep Power: 14	ProClip Holder + Custom Mount I was inspired by this thread and thought I'd share my recent project. I liked the ProClip holder but didn't much care for the mounts as they look a bit kluged together in my opinion. I decided to make a custom one and started playing with some fiberglass. Here's the result. m4a1mustang, kenchan, FairladyZ10PG and 4 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket Dash Mounts - ProClip	SoCal 370Z	Exterior & Interior	33	07-15-2014 10:57 PM
Droid	510z	The Lounge (Off Topic)	678	07-01-2011 02:46 PM
Anyone else pick up the new Verizon DROID?	MightyBobo	The Lounge (Off Topic)	56	11-11-2009 12:31 AM
Aftermarket Dash Mount "Xentris Mount"	37009	Audio & Video	1	11-03-2009 03:12 PM
Where to mount amps on 370z enclosure?	flashburn	ZEnclosures	16	10-13-2009 07:37 PM

07-12-2013, 11:29 AM	#31 (permalink)
Menace370Z Base Member Join Date: Aug 2012 Location: Sunnyvale Posts: 24 Drives: '13 370Z MB MT Rep Power: 12	Anyone use the ProClip Mount for a Samsung S4? I was looking at this one online, I have a Spigen SlimArmor case. Samsung Galaxy S4 Medium Universal Adjustable Holder for devices with a Case-ProClip USA

04-04-2015, 10:44 PM	#34 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	nice job! looks better than proclip.

04-05-2015, 10:26 PM	#35 (permalink)
370_o Base Member Join Date: Jul 2013 Location: Santa Monica, CA Posts: 51 Drives: 2013 370Z Sport M6 Rep Power: 14	Thanks!

05-01-2015, 11:52 AM	#38 (permalink)
darkphantom Enthusiast Member Join Date: Apr 2015 Location: Houston, Texas Posts: 425 Drives: 13 Z34 PW M6 Rep Power: 243	https://www.youtube.com/watch?v=CnEksmuCn4E anyone know of anything like this? I really don't want a windshield mount of navigation, and these other clips are too low.

05-19-2015, 12:03 PM	#41 (permalink)
370_o Base Member Join Date: Jul 2013 Location: Santa Monica, CA Posts: 51 Drives: 2013 370Z Sport M6 Rep Power: 14	Ok, I give in. I'll make a small run of the one piece design that I posted. I'm also planning on creating a two piece design that's easier to install. PM me if you're interested. I'm sure the Mods will let me know how/where to post in the future now that I plan on selling these things...

05-19-2015, 02:29 PM	#42 (permalink)
nismo13807 Enthusiast Member Join Date: Jan 2013 Location: Illinois Posts: 340 Drives: 2013 Nismo 370z Rep Power: 3367	^^ dam you... i just ordered a proclip last week...