Turn Signal Positive in Headlights

370nellez · 03-31-2021, 11:58 PM

Does anyone know what wire is the positive power wire in the headlight for the turn signal? There are 3 wires in there and i need to tap into them for my halos that i added. The halos will turn orange when i use the turn signals or hazards.

I tried looking at the FSM and i just couldnt understand the wiring diagram. If anyone can just help out and tell me what wire is the power so i can tap into that from the turn signal bulbs in the headlights that would be much appreciated.

geeteezee · 04-01-2021, 09:20 AM

Probe the connector with a meter.

djburke87 · 04-01-2021, 12:55 PM

Go to the FSM. The manual is Exterior Lighting System Page 75 (EXL-75). Look at the second image (sec. 260).

The part labeled "2. Front Turn Signal Lamp Bulb Socket" should be what you're looking for. Test it with a meter or voltage tester by turning the turn signal on and off to make sure it is correct

370nellez · 04-05-2021, 12:50 PM

skipped the hassle, went straight for the green wire on the turn signal harness in the headlight. it turn out to be correct

GREEN WIRE is the positive for the turn signal for anyone who needs it in the future.

Lvcky69 · 04-05-2021, 01:03 PM

Quote:

Originally Posted by 370nellez

skipped the hassle, went straight for the green wire on the turn signal harness in the headlight. it turn out to be correct

GREEN WIRE is the positive for the turn signal for anyone who needs it in the future.

post pictures when you are done

03-31-2021, 11:58 PM	#1 (permalink)
370nellez Base Member Join Date: Dec 2014 Location: San Francisco, Ca Posts: 28 Drives: 2013 Nissan 370 Rep Power: 10	Turn Signal Positive in Headlights Does anyone know what wire is the positive power wire in the headlight for the turn signal? There are 3 wires in there and i need to tap into them for my halos that i added. The halos will turn orange when i use the turn signals or hazards. I tried looking at the FSM and i just couldnt understand the wiring diagram. If anyone can just help out and tell me what wire is the power so i can tap into that from the turn signal bulbs in the headlights that would be much appreciated. __________________ MotorDyne CBE - Takeda CAI - LoweringSprings ARK Performance - Fly1 Fenders - eBay Rear Spats/Diffuser https://youtu.be/bAudW9B91bk

04-01-2021, 09:20 AM	#2 (permalink)
geeteezee Base Member Join Date: Jun 2019 Location: Ontario Posts: 191 Drives: 19 370z Heritage EAC Rep Power: 3360	Probe the connector with a meter. SouthArk370Z and sportsman2003 like this. __________________

04-05-2021, 12:50 PM	#4 (permalink)
370nellez Base Member Join Date: Dec 2014 Location: San Francisco, Ca Posts: 28 Drives: 2013 Nissan 370 Rep Power: 10	skipped the hassle, went straight for the green wire on the turn signal harness in the headlight. it turn out to be correct GREEN WIRE is the positive for the turn signal for anyone who needs it in the future. Lvcky69 likes this. __________________ MotorDyne CBE - Takeda CAI - LoweringSprings ARK Performance - Fly1 Fenders - eBay Rear Spats/Diffuser https://youtu.be/bAudW9B91bk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turn Signal wires on pigtail that plugs into the turn signal switch	Mikevang_Z34	Exterior & Interior	1	01-27-2021 10:06 PM
LED turn signal damage.	NZ.Z	Nissan 370Z General Discussions	1	02-23-2017 07:18 PM
Turn signal problem	gloeckner08	Exterior & Interior	9	09-28-2016 07:31 AM
Loose turn signal	Big J	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	1	01-26-2011 02:54 PM
LEDs for 370Z headlights and turn signal?	G in ny	Nissan 370Z General Discussions	5	12-03-2008 11:39 AM

04-01-2021, 12:55 PM	#3 (permalink)
djburke87 Base Member Join Date: Apr 2020 Location: Staunton, VA Posts: 72 Drives: 2018 370z Nismo Rep Power: 5	Go to the FSM. The manual is Exterior Lighting System Page 75 (EXL-75). Look at the second image (sec. 260). The part labeled "2. Front Turn Signal Lamp Bulb Socket" should be what you're looking for. Test it with a meter or voltage tester by turning the turn signal on and off to make sure it is correct