Z1 Motorsports Aluminum Undertrays

OptionZero · 10-14-2020, 10:11 PM

good
can you confirm the nismo one you got looks like the picture i posted?

Mine should be here Friday, lets cross our fingers

anyone wanna put odds on it?
Greg Frazier said he personally looked at it to confirm before shipping it to me, so they really got no excuse this time

JARblue · 10-15-2020, 07:28 AM

Quote:

Originally Posted by OptionZero

so they really got no excuse this time

There really should be no excuse for the first 2 times either

Jonathan3tran · 10-15-2020, 04:21 PM

Quote:

Originally Posted by OptionZero

good
can you confirm the nismo one you got looks like the picture i posted?

Mine should be here Friday, lets cross our fingers

anyone wanna put odds on it?
Greg Frazier said he personally looked at it to confirm before shipping it to me, so they really got no excuse this time

I don’t see the nismo picture that you posted, the one I see is the non nismo version!

abm89 · 10-15-2020, 01:37 PM

Meanwhile, I managed to already order and install one in this timeframe. They usually don't give me any issues with my orders. Hopefully things get resolved.

OptionZero · 10-15-2020, 07:10 PM

no, the one from the listing

non-nismo is flat forward panel
nismo is kinked/bent
like this:

OptionZero · 10-20-2020, 01:21 PM

Finally came in today. They got it right this time.

Comparison:

The Nismo one is on the top, and clearly has a kink.

The label matches

Jonathan3tran · 10-20-2020, 09:29 PM

Quote:

Originally Posted by OptionZero

Finally came in today. They got it right this time.

Comparison:

The Nismo one is on the top, and clearly has a kink.

The label matches

Nice now hopefully you got a 25/64 or 10mm drill bit, and get that baby installed

BettyZ · 10-20-2020, 11:50 PM

This ish looks 5 times more complicated than the ZSpeed Nismo undertray. And all those angles look like a great way to catch and hold roadkill into the undertray until part of the panel tears off, starts dragging on the asphalt, and catches on fire. Speaking from 350Z experience.

abm89 · 10-21-2020, 09:58 AM

Quote:

Originally Posted by BettyZ

This ish looks 5 times more complicated than the ZSpeed Nismo undertray. And all those angles look like a great way to catch and hold roadkill into the undertray until part of the panel tears off, starts dragging on the asphalt, and catches on fire. Speaking from 350Z experience.

I have the non-nismo version of this, and the clearance underneath the car is much higher than the ZSpeed version i took off my car. Also, this aluminum used on the Z1 version seemed of MUCH higher quality than the Zspeed trays i've gone through (granted the damage done to those was due to Houston roads.)

Rusty · 10-21-2020, 10:45 AM

If anyone is thinking about an APR splitter. You have to use the ZSpeed under tray.

abm89 · 10-21-2020, 12:09 PM

Quote:

Originally Posted by Rusty

If anyone is thinking about an APR splitter. You have to use the ZSpeed under tray.

I would recommend Racebred components, which I think completely eliminates/replaces the undertray. They can also make you a splitter based on a template you send then.

OptionZero · 10-21-2020, 12:29 PM

Quote:

Originally Posted by BettyZ

This ish looks 5 times more complicated than the ZSpeed Nismo undertray. And all those angles look like a great way to catch and hold roadkill into the undertray until part of the panel tears off, starts dragging on the asphalt, and catches on fire. Speaking from 350Z experience.

Three piece layout makes packaging for shipping MUCH easier, speaking as someone that tried to ship a zspeed. I will hope to avoid roadkill, hasn’t been an issue I ever experienced here

Rusty · 10-21-2020, 12:41 PM

I've beaten up my ZSpeed at the track a couple of times. I've taken it off and beat flat again with a mallet.

BettyZ · 10-21-2020, 11:52 PM

Quote:

Originally Posted by OptionZero

Three piece layout makes packaging for shipping MUCH easier, speaking as someone that tried to ship a zspeed. I will hope to avoid roadkill, hasn’t been an issue I ever experienced here

Currently running a ZSpeed Nismo, it's a glutton for punishment, mostly due to it being entirely flat except for where it mounts to the radiator core support.

I had two TBWs for my 350Z. Very solid product, but the multi-piece and angled design meant that if you nailed something on the undercarriage you would have issues. And if the middle portion was damaged enough that it bend to the road...ended up with a nice little flambeau outside of Funk, NE.

Z1 design looks similar AF. Good luck brah!!!

Sent from my SM-G955U using Tapatalk

axmea? · 10-21-2020, 01:19 AM

Pics please. Glad they took care if your issue. I had TBW and it was a straightforward install. Not sure if they have one for a Nismo though.

10-14-2020, 10:11 PM	#1 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,270 Drives: 15 370Z Nismo 6MT Rep Power: 214101	good can you confirm the nismo one you got looks like the picture i posted? Mine should be here Friday, lets cross our fingers anyone wanna put odds on it? Greg Frazier said he personally looked at it to confirm before shipping it to me, so they really got no excuse this time JARblue and Spooler like this. __________________ OptionZero Build Thread

10-15-2020, 01:37 PM	#4 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,390 Drives: 11 370Z, 2x Kawasaki Rep Power: 64764	Meanwhile, I managed to already order and install one in this timeframe. They usually don't give me any issues with my orders. Hopefully things get resolved. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

10-15-2020, 07:10 PM	#5 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,270 Drives: 15 370Z Nismo 6MT Rep Power: 214101	no, the one from the listing non-nismo is flat forward panel nismo is kinked/bent like this: __________________ OptionZero Build Thread

10-20-2020, 01:21 PM	#6 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,270 Drives: 15 370Z Nismo 6MT Rep Power: 214101	Finally came in today. They got it right this time. Comparison: The Nismo one is on the top, and clearly has a kink. The label matches __________________ OptionZero Build Thread

10-20-2020, 11:50 PM	#8 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: USA Age: 38 Posts: 5,260 Drives: A Garage Queen Rep Power: 2684372	This ish looks 5 times more complicated than the ZSpeed Nismo undertray. And all those angles look like a great way to catch and hold roadkill into the undertray until part of the panel tears off, starts dragging on the asphalt, and catches on fire. Speaking from 350Z experience. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

10-21-2020, 10:45 AM	#10 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,558 Drives: 2011 Nismo GM 6M Rep Power: 2684439	If anyone is thinking about an APR splitter. You have to use the ZSpeed under tray. JARblue, abm89, -ZS-Carpenter and 1 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

10-21-2020, 12:41 PM	#13 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,558 Drives: 2011 Nismo GM 6M Rep Power: 2684439	I've beaten up my ZSpeed at the track a couple of times. I've taken it off and beat flat again with a mallet. JARblue, abm89, jchammond and 2 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

10-21-2020, 01:19 AM	#15 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,243 Drives: WELL ZED PW 6MT Rep Power: 53242	Pics please. Glad they took care if your issue. I had TBW and it was a straightforward install. Not sure if they have one for a Nismo though. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete Last edited by axmea?; 10-24-2020 at 04:00 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
19" Polished Aluminum 370Z Optional Wheel Package Now available @ Z1 Motorsports	Dustin@Z1	Z1 Motorsports	21	08-22-2018 02:35 PM
Z1 Motorsports 370Z / G37 Aluminum Subframe Bushing Collars	John@Z1	Suspension/Brakes	1	11-09-2017 06:46 PM
[FOR SALE] Z1 Motorsports 370Z Solid Aluminum Motor Mounts	enguyen88	Parts for sale (Private Classifieds)	13	07-05-2017 10:06 AM
Z1 Motorsports: Aluminum Shift Knobs Starting at $38	John@Z1	Body Interior/Exterior	19	06-15-2015 03:50 PM