Theft proof screw on steering wheel airbag assembly

Rusty · 02-08-2020, 08:51 PM

If that kit has a small enough bit to fit on the bolt. Use an impact driver with it. The type you use with a hammer. Put the bit on a small extension to impact driver. Using a hammer, Tap on the end of the driver, while twisting it with your hand. Should loosen up. I've done this with screws on motorcycle cases for years

https://www.amazon.com/Vessel-NO-250...71485441&psc=1

redondoaveb · 02-08-2020, 09:08 PM

Quote:

Originally Posted by Rusty

If that kit has a small enough bit to fit on the bolt. Use an impact driver with it. The type you use with a hammer. Put the bit on a small extension to impact driver. Using a hammer, Tap on the end of the driver, while twisting it with your hand. Should loosen up. I've done this with screws on motorcycle cases for years

https://www.amazon.com/Vessel-NO-250...71485441&psc=1

Remember when all motorcycle cases had phillips screws and you had to have that impact driver.

Rusty · 02-08-2020, 09:15 PM

Quote:

Originally Posted by redondoaveb

Remember when all motorcycle cases had phillips screws and you had to have that impact driver.

If you didn't have an impact driver. You WASN'T getting any of the screws out.

I have a couple of those impacts floating around.

1/4, 3/8, and 1/2 drives.

redondoaveb · 02-08-2020, 09:31 PM

Quote:

Originally Posted by Rusty

If you didn't have an impact driver. You WASN'T getting any of the screws out.

I have a couple of those impacts floating around.

1/4, 3/8, and 1/2 drives.

Whoever invented allen head bolts is a god.

I lost mine about 40 years ago.

Rusty · 02-08-2020, 10:33 PM

Quote:

Originally Posted by redondoaveb

Whoever invented allen head bolts is a god.

I lost mine about 40 years ago.

My 1/2" one has the head mushrooming over from being beat on with a sledge.

02-08-2020, 08:51 PM	#1 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,575 Drives: 2011 Nismo GM 6M Rep Power: 2684440	If that kit has a small enough bit to fit on the bolt. Use an impact driver with it. The type you use with a hammer. Put the bit on a small extension to impact driver. Using a hammer, Tap on the end of the driver, while twisting it with your hand. Should loosen up. I've done this with screws on motorcycle cases for years https://www.amazon.com/Vessel-NO-250...71485441&psc=1 jchammond and redondoaveb like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Need Steering Wheel airbag cap	moody_i	Parts for sale (Private Classifieds)	0	07-12-2015 02:50 PM
[WTB] WTB: steering wheel airbag, curtain airbag, passenger seat/airbag	Dredrizzlez	Parts for sale (Private Classifieds)	1	06-24-2015 09:11 PM
[FOR SALE] OEM steering wheel (no airbag)	RN SHARK	Parts for sale (Private Classifieds)	7	05-01-2015 07:23 AM
Steering wheel airbag	Stowell#	Wanted	2	01-19-2015 01:26 AM
[WTB] steering wheel airbag	fairz	Parts for sale (Private Classifieds)	3	06-04-2014 04:01 AM