In-cabin microfilter install on 09's?

caneman88 · 02-01-2010, 07:06 PM

Quote:

Originally Posted by jpit

I recommend the CAF1766. It is about 1/2' less thick and slides up onto the runners and the door tabs fit underneath it. Installation went fine. caneman, how did you put the plastic door back on with the four tabs protruding into the filter?

I don't recall it my door had tabs guess that why it was hard to close.
I will look next time I change I have allergies and Central Texas is one of the worst in the nation. Sneezing at 110 mph is not a good thing 70mph either.

caneman88 · 02-01-2010, 07:27 PM

CLEAN FILTER

Parts Manufacturer: Nissan
Item No.: 415-016-033
Price: 3,000 yen(JPY) / (33.30 USD)
Delivery time by air: 10-15 days
MODEL: Z34
Need to change for 12months or 12.000km each.
Car Manufacturer: Nissan
Car Name: FairladyZ Z34<370Z>

]http://www.japanparts.com/db/partslist.php?dealer=5&car=149&middle=2&small=13[/URL]

Look what I found on the JDM parts site I guess they need clean air in Japan
Screw everybody else

YamahaR6 · 02-01-2010, 07:28 PM

Took off the glove box and purchased:

LEXUS ES330 AIR CABIN FILTER 2004 2005 2006 ES 330 NEW! : eBay Motors (item 350303997198 end time Feb-10-10 12:02:51 PST)

There are exactly 7 screws for the glove box. And yes, have to "pull hard" to get it off.

Grab the bottom of the glove box and pull it towards the seat. You will first get the bottom out and then pull from the right side to get the top part out.

Just my 2 cents. Will confirm when the filter arrives that it fits.

6MT · 02-01-2010, 09:23 PM

Quote:

Originally Posted by YamahaR6

Took off the glove box and purchased:

LEXUS ES330 AIR CABIN FILTER 2004 2005 2006 ES 330 NEW! : eBay Motors (item 350303997198 end time Feb-10-10 12:02:51 PST)

There are exactly 7 screws for the glove box. And yes, have to "pull hard" to get it off.

Grab the bottom of the glove box and pull it towards the seat. You will first get the bottom out and then pull from the right side to get the top part out.

Just my 2 cents. Will confirm when the filter arrives that it fits.

Yep, us parts guys just love owners like this. Profit, profit, profit.

(and really no useful reason)

theDreamer · 02-01-2010, 09:25 PM

Glad to see some of you jumping in and buying filter(s), is there any standard size or anything I can look at picking up if I drop into an auto store this week(end)?

6MT · 02-01-2010, 09:28 PM

Oh, btw, if you're going to flame me for the "no reason" comment.... just think of this senario:

What if, this summer, you decide it's time to change that dirty, filthy filter under your glovebox. And, lets say, you break the glovebox removing it. Because it just "doesn't come off like it did the first time".

Now what...? Bet 'ya wish you hadn't installed the damn thing in the first place.

theDreamer · 02-01-2010, 09:29 PM

Quote:

Originally Posted by 6MT

Oh, btw, if you're going to flame me for the "no reason" comment.... just think of this senario:

What if, this summer, you decide it's time to change that dirty, filthy filter under your glovebox. And, lets say, you break the glovebox removing it. Because it just "doesn't come off like it did the first time".

Now what...? Bet 'ya wish you hadn't installed the damn thing in the first place.

Well you can look at this way, it is required to be checked/replaced by Nissan if you follow the normal maintenance (for the 2010 Z). This is meant to be taken off & put back together, just be careful and you will be fine.

6MT · 02-01-2010, 09:31 PM

Sorry, I was speaking to the 2009 crowd. It's not in that year.

theDreamer · 02-01-2010, 09:32 PM

Quote:

Originally Posted by 6MT

Sorry, I was speaking to the 2009 crowd. It's not in that year.

But it is the exact same car, just because Nissan decided to not put it in does not mean the part is meant not to be opened/added. I could understand if there were no screws to gain access to the panel and it was locked down, but it is a few screws and pop off like most any other panels in this car, just be careful.

6MT · 02-01-2010, 09:34 PM

Quote:

Originally Posted by theDreamer

just be careful.

Key words of advice. Good luck y'all.

Trips · 02-01-2010, 09:39 PM

Quote:

Originally Posted by theDreamer

But it is the exact same car, just because Nissan decided to not put it in does not mean the part is meant not to be opened/added. I could understand if there were no screws to gain access to the panel and it was locked down, but it is a few screws and pop off like most any other panels in this car, just be careful.

And a good point for all attempting this!!!
Be careful, not to break or over tighten the screws....

jpit · 02-01-2010, 09:59 PM

I think the following cabin filters should fit: Bosch #P3785, Fram # CF10157, Purolator
#C35479, and WIX #24883. The size should be about 8.5" by 8.5" by 0.7".

YamahaR6 · 02-01-2010, 10:04 PM

$10 expense... 5 mins of time... for a $50K car....mm...why not?

billydsz · 02-01-2010, 10:12 PM

Is the HVAC system the same in the 2010 as the 2009? The reason I ask is I assume you guys checked to see if the 2009 system can handle the increased back pressure through the filter and still heat and cool the car adequately??

Modshack · 02-02-2010, 12:09 PM

Quote:

Originally Posted by 6MT

What if, this summer, you decide it's time to change that dirty, filthy filter under your glovebox. And, lets say, you break the glovebox removing it. Because it just "doesn't come off like it did the first time".

If your Glove box is half empty then you will undoubtedly have a problem and break stuff. If your glove box is half full, you will have no issues at all and things will go swimingly......

02-01-2010, 07:27 PM	#62 (permalink)
caneman88 Base Member Join Date: Mar 2009 Location: San Antonio TX Posts: 225 Drives: PG 370Z,M-35,F150 Rep Power: 16	CLEAN FILTER Parts Manufacturer: Nissan Item No.: 415-016-033 Price: 3,000 yen(JPY) / (33.30 USD) Delivery time by air: 10-15 days MODEL: Z34 Need to change for 12months or 12.000km each. Car Manufacturer: Nissan Car Name: FairladyZ Z34<370Z> ]http://www.japanparts.com/db/partslist.php?dealer=5&car=149&middle=2&small=13[/URL] Look what I found on the JDM parts site I guess they need clean air in Japan Screw everybody else __________________ GO CANES \|\|Stillen CB Exhaust \|\|Berk HFC \|\|Stillen G3 Intake\|\|UpRev Tuned\|\|S-Tune Front Spoiler\|\|Setrab 19 Oil Cooler\|\| Last edited by caneman88; 02-01-2010 at 07:31 PM. Reason: add

02-01-2010, 09:25 PM	#65 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Glad to see some of you jumping in and buying filter(s), is there any standard size or anything I can look at picking up if I drop into an auto store this week(end)? __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

02-01-2010, 09:28 PM	#66 (permalink)
6MT A True Z Fanatic Join Date: May 2009 Location: ITU Zone 2 Posts: 22,459 Drives: Reliant Robin Rep Power: 1790	Oh, btw, if you're going to flame me for the "no reason" comment.... just think of this senario: What if, this summer, you decide it's time to change that dirty, filthy filter under your glovebox. And, lets say, you break the glovebox removing it. Because it just "doesn't come off like it did the first time". Now what...? Bet 'ya wish you hadn't installed the damn thing in the first place. __________________ Andrew 2009 370Z Sport/Touring 6MT sold 2013 Honda Civic Si coupe D/D

02-01-2010, 09:31 PM	#68 (permalink)
6MT A True Z Fanatic Join Date: May 2009 Location: ITU Zone 2 Posts: 22,459 Drives: Reliant Robin Rep Power: 1790	Sorry, I was speaking to the 2009 crowd. It's not in that year. __________________ Andrew 2009 370Z Sport/Touring 6MT sold 2013 Honda Civic Si coupe D/D

02-01-2010, 09:59 PM	#72 (permalink)
jpit Enthusiast Member Join Date: Feb 2009 Location: Washington State Posts: 440 Drives: 370Z Tour MT w/Spt Rep Power: 16	I think the following cabin filters should fit: Bosch #P3785, Fram # CF10157, Purolator #C35479, and WIX #24883. The size should be about 8.5" by 8.5" by 0.7". Last edited by jpit; 02-01-2010 at 10:01 PM.

02-01-2010, 07:28 PM	#63 (permalink)
YamahaR6 Track Member Join Date: Feb 2009 Location: California Posts: 527 Drives: A Car Rep Power: 17	Took off the glove box and purchased: LEXUS ES330 AIR CABIN FILTER 2004 2005 2006 ES 330 NEW! : eBay Motors (item 350303997198 end time Feb-10-10 12:02:51 PST) There are exactly 7 screws for the glove box. And yes, have to "pull hard" to get it off. Grab the bottom of the glove box and pull it towards the seat. You will first get the bottom out and then pull from the right side to get the top part out. Just my 2 cents. Will confirm when the filter arrives that it fits.

02-01-2010, 10:04 PM	#73 (permalink)
YamahaR6 Track Member Join Date: Feb 2009 Location: California Posts: 527 Drives: A Car Rep Power: 17	$10 expense... 5 mins of time... for a $50K car....mm...why not?

02-01-2010, 10:12 PM	#74 (permalink)
billydsz Enthusiast Member Join Date: Aug 2009 Location: New Bern Posts: 252 Drives: 9 370z SptCp SRd 7AT Rep Power: 15	Is the HVAC system the same in the 2010 as the 2009? The reason I ask is I assume you guys checked to see if the 2009 system can handle the increased back pressure through the filter and still heat and cool the car adequately??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
In Cabin Air Filter?	caneman88	Exterior & Interior	13	08-11-2012 10:50 AM
Cabin Filter	polarity	Nissan 370Z General Discussions	11	11-10-2009 11:24 PM
Dealer Says Not Ordering '09's	Dwight Frye	Nissan 370Z Pricing / Ordering Discussions	7	08-26-2009 09:55 PM
Confused Micro-Cabin Filter on 09's or just 2010?	Asheth	Nissan 370Z General Discussions	5	08-18-2009 10:00 PM
Cabin air filter	av370	Nissan 370Z General Discussions	3	07-17-2009 08:29 PM