STILLEN 370Z Urethane Fascia - Sneak Peek - In Development

370zproject · 03-22-2010, 06:32 AM

is there a finished product?

htt760 · 03-22-2010, 01:00 PM

Quote:

Originally Posted by 370zproject

is there a finished product?

we are still awaiting stillen to finish a few things on mounting and install information before officially shipping out the products. they want to make sure everything is legit.

Kyle@STILLEN · 03-22-2010, 01:06 PM

We're finalizing a few things right now. During our testing of the fascia we found that the top mounting surface was a little thin and a little weak. We used the factory fascia for this section and it might have been a bit too thin. So, the craftsmen in the modeling shop worked on that on Friday and again this morning. We should know more this afternoon. I was hoping to have everyone wrapped up and shipped on Friday but as everyone has said, we would all rather wait until everything is perfect before we ship them out.

We're a few pages deep now so I though it would be a good time to recap some of the integrated features of the fascia.

1) Additional cooling- We opened up the main center opening to allow for a lot more air flow.

2) Even more airflow- We plan on offering an additional oil cooler which can be mounted behind the vent on the driver's side. For the guys who purchased the street cooler first, then the motorsport cooler...That street cooler fits perfectly in the side opening so you can now run both. This is what we plan on doing for our car.

3) Still more airflow- We have incorporated a small vent underneath the top section of the fascia. This small vent will help direct air to the Gen. 3's, supercharger intakes, and intercooler.

4) Brake ducts- We will be building some modular brake ducts for people who want to either keep the fang look or for the guy who just wants brake ducting. Either way, these will be 100% functional and work perfectly for both people.

5) Great looks- We wanted to keep this looking good but functionality was definitely the primary focus.

370zproject · 03-22-2010, 04:41 PM

Quote:

Originally Posted by Kyle@STILLEN

We're finalizing a few things right now. During our testing of the fascia we found that the top mounting surface was a little thin and a little weak. We used the factory fascia for this section and it might have been a bit too thin. So, the craftsmen in the modeling shop worked on that on Friday and again this morning. We should know more this afternoon. I was hoping to have everyone wrapped up and shipped on Friday but as everyone has said, we would all rather wait until everything is perfect before we ship them out.

We're a few pages deep now so I though it would be a good time to recap some of the integrated features of the fascia.

1) Additional cooling- We opened up the main center opening to allow for a lot more air flow.

2) Even more airflow- We plan on offering an additional oil cooler which can be mounted behind the vent on the driver's side. For the guys who purchased the street cooler first, then the motorsport cooler...That street cooler fits perfectly in the side opening so you can now run both. This is what we plan on doing for our car.

3) Still more airflow- We have incorporated a small vent underneath the top section of the fascia. This small vent will help direct air to the Gen. 3's, supercharger intakes, and intercooler.

4) Brake ducts- We will be building some modular brake ducts for people who want to either keep the fang look or for the guy who just wants brake ducting. Either way, these will be 100% functional and work perfectly for both people.

5) Great looks- We wanted to keep this looking good but functionality was definitely the primary focus.

post pics when done

LateralG'z · 03-22-2010, 04:50 PM

How soon, I am dying to know so I can include it in my budget for my upgrades

Quote:

Originally Posted by Kyle@STILLEN

We're finalizing a few things right now. During our testing of the fascia we found that the top mounting surface was a little thin and a little weak. We used the factory fascia for this section and it might have been a bit too thin. So, the craftsmen in the modeling shop worked on that on Friday and again this morning. We should know more this afternoon. I was hoping to have everyone wrapped up and shipped on Friday but as everyone has said, we would all rather wait until everything is perfect before we ship them out.

We're a few pages deep now so I though it would be a good time to recap some of the integrated features of the fascia.

1) Additional cooling- We opened up the main center opening to allow for a lot more air flow.

2) Even more airflow- We plan on offering an additional oil cooler which can be mounted behind the vent on the driver's side. For the guys who purchased the street cooler first, then the motorsport cooler...That street cooler fits perfectly in the side opening so you can now run both. This is what we plan on doing for our car.

3) Still more airflow- We have incorporated a small vent underneath the top section of the fascia. This small vent will help direct air to the Gen. 3's, supercharger intakes, and intercooler.

4) Brake ducts- We will be building some modular brake ducts for people who want to either keep the fang look or for the guy who just wants brake ducting. Either way, these will be 100% functional and work perfectly for both people.

5) Great looks- We wanted to keep this looking good but functionality was definitely the primary focus.

Kyle@STILLEN · 03-22-2010, 05:28 PM

I am pretty confident when I say that it will be ready by the end of this week. I will know more tomorrow morning when we run the new part. The mold is curing today after the changes we made and it will be ready to shoot tomorrow.

I will have a more official release soon with all the specifics and details as well as part numbers and prices for the optional upgrade pieces like the compact/hidden windshield washer reservoir, oil cooler upgrade, and more. But, for now, here is the price for the fascia. This fascia will sell for $497.00 and it does qualify for the free freight. Only $9.95 to cover insurance and handling and we pay all of the additional freight!

azn370z · 03-22-2010, 05:40 PM

How much will the sideskirts cost?

Kyle@STILLEN · 03-22-2010, 06:16 PM

I don't think we have a price on the skirts yet.

LateralG'z · 03-22-2010, 07:36 PM

Great thanks, I am really stoked about this, lots of function here to make the car better.

Quote:

Originally Posted by Kyle@STILLEN

I am pretty confident when I say that it will be ready by the end of this week. I will know more tomorrow morning when we run the new part. The mold is curing today after the changes we made and it will be ready to shoot tomorrow.

I will have a more official release soon with all the specifics and details as well as part numbers and prices for the optional upgrade pieces like the compact/hidden windshield washer reservoir, oil cooler upgrade, and more. But, for now, here is the price for the fascia. This fascia will sell for $497.00 and it does qualify for the free freight. Only $9.95 to cover insurance and handling and we pay all of the additional freight!

03-22-2010, 06:32 AM	#1 (permalink)
370zproject A True Z Fanatic Join Date: Jul 2009 Location: Memphis Age: 34 Posts: 16,104 Drives: 09 A/T 370z blue Rep Power: 52	is there a finished product? __________________ Brake Upgrade Package ate blue, hawk hp ceramic pads, and slotted rotors

03-22-2010, 05:40 PM	#7 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 489	How much will the sideskirts cost? __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber front fascia?	kannibul	Exterior & Interior	21	09-30-2009 01:19 AM
front fascia cost?	Snakes709	Nissan 370Z General Discussions	7	09-22-2009 07:15 AM
Sneak Peek, Carbon Fiber B-Pillars @ The 370ZSOURCE!!!	Michael@TheZStore	Exterior & Interior	3	08-25-2009 05:21 PM
Sneak Peek, Carbon Fiber Door Sills @ The 370ZSOURCE!!!!!	Michael@TheZStore	Exterior & Interior	2	07-29-2009 03:58 PM
Going to sneak a peek at a 2010 Genesis Coupe in a few minutes!!!	iamtherhino	Other Vehicles	5	03-07-2009 10:08 AM

03-22-2010, 01:06 PM	#3 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 306	We're finalizing a few things right now. During our testing of the fascia we found that the top mounting surface was a little thin and a little weak. We used the factory fascia for this section and it might have been a bit too thin. So, the craftsmen in the modeling shop worked on that on Friday and again this morning. We should know more this afternoon. I was hoping to have everyone wrapped up and shipped on Friday but as everyone has said, we would all rather wait until everything is perfect before we ship them out. We're a few pages deep now so I though it would be a good time to recap some of the integrated features of the fascia. 1) Additional cooling- We opened up the main center opening to allow for a lot more air flow. 2) Even more airflow- We plan on offering an additional oil cooler which can be mounted behind the vent on the driver's side. For the guys who purchased the street cooler first, then the motorsport cooler...That street cooler fits perfectly in the side opening so you can now run both. This is what we plan on doing for our car. 3) Still more airflow- We have incorporated a small vent underneath the top section of the fascia. This small vent will help direct air to the Gen. 3's, supercharger intakes, and intercooler. 4) Brake ducts- We will be building some modular brake ducts for people who want to either keep the fang look or for the guy who just wants brake ducting. Either way, these will be 100% functional and work perfectly for both people. 5) Great looks- We wanted to keep this looking good but functionality was definitely the primary focus.

03-22-2010, 05:28 PM	#6 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 306	I am pretty confident when I say that it will be ready by the end of this week. I will know more tomorrow morning when we run the new part. The mold is curing today after the changes we made and it will be ready to shoot tomorrow. I will have a more official release soon with all the specifics and details as well as part numbers and prices for the optional upgrade pieces like the compact/hidden windshield washer reservoir, oil cooler upgrade, and more. But, for now, here is the price for the fascia. This fascia will sell for $497.00 and it does qualify for the free freight. Only $9.95 to cover insurance and handling and we pay all of the additional freight!

03-22-2010, 06:16 PM	#8 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 306	I don't think we have a price on the skirts yet.