Another Sticky Dash Issue

SG4247

Get the sticky dash fixed and now this?

Attached Images

IMG_4132.jpg (290.6 KB, 38 views)

__________________
NA on E85 - 12.669 @ 110 mph (stock fuel pump)
100 shot E85 - 11.589 @ 117 mph (DW fuel pump)
JWT C2 cams rev Base Circle & Titan Valves

nis350

sorry to see that... I suppose the heat caused stickiness and cracks.

nis350

would you mind take a pic of the ingredients of this product? It might be similar to other plastic protectants?

Spartan 1771

I'd be happy to test it out, but that leads me to the same problem: I need to get the product first.

Test or not, I'm interested in acquiring some, so if there is a group buy, count me in!

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

40 to 332

OK, so there appears to be some interest in a group buy. Some caveats for those who are interested:
1. The product is intended to eliminate the stickiness/tackiness that has been reported to occur on some dashes. It will NOT fix cracks in the dash.
2. There is no guarantee the product will work as intended. Although one member (Filip00) has evidently experienced success with the product, it may not work under all circumstances.
3. The product is sold in 1 liter (L) containers. You will be purchasing 1L of the product (...which is likely to be more than needed).
4. Pricing will include the cost of the product itself as well as shipping costs (including any duty and taxes). Arrangements will be made to ship up to six (6) containers of the product overseas from Europe to the U.S.A. This bulk shipment will be sent to one member (to be determined), who will then arrange to ship the individual containers to the other interested members. As a result, there will be two (2) shipping charges ... one from Europe to the U.S. and one for shipping within the U.S.
5. Pricing is yet to be determined. (I will ask Filip00 to provide the price for the product itself so that we at least will have some idea of the cost).
6. The group buy will be limited to six (6) members. It will close: i) when 6 members have stepped forward; or, ii) on August 4, 2023, which ever occurs first.
7. Two members have already expressed interest ... so there are 4 remaining spots at this time.
8. Any questions ... just fire off a post.

40 to 332

Filip00, ... can you please provide the price of the product itself? Thanks!

filip00

There's very little useful information on the packaging. And I can't believe they pack it as a one liter package, I've got enough stuff to treat probably 50 cars, and I'm not exaggerating. This could literally be 1/10 of the package, and it would be MORE than enough for a single person and multiple use on one car. Trust me when I tell you - 5 people could COMFORTABLY split one packaging and they would still end up with way too much stuff on their hands.

Price for this 1liter package was 18€, i.e. cca $20.
I bought it from a local store here in Slovenia: https://www.operi-avto.si/zascitni-i...068111099.html

40 to 332

OK folks, so the price of the product itself is $20 USD for one liter. To keep things simple, I'd prefer to ship/distribute individual 1L containers to each interested member. I realize this is much more than needed to treat a single vehicle, but I'd like to avoid the hassle of splitting the contents of a single 1L container into several smaller containers as part of this group buy. Of course, each member is free to split the contents for sale later on to other members if so desired. At this time, two members have expressed interest:

40 to 332
Spartan 1771

As indicated above, the group buy will close when either 6 members have expressed interest or on August 4th, whichever occurs first.

Spartan 1771

I'm really surprised more people aren't jumping at this offer. The only alternative I see is replacement, which is expensive and a nightmare to do yourself.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

cv129

Put me down for a bottle. Thanks for coordinating.

__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield

40 to 332

OK, we're now at 3 members:

40 to 332
Spartan 1771
CV129

Again, the group buy will close when either 6 members have signed on or on Friday, August 4th, whichever occurs first.

SG4247

Id go for one, send me a PM with payment instructions.

SG

__________________
NA on E85 - 12.669 @ 110 mph (stock fuel pump)
100 shot E85 - 11.589 @ 117 mph (DW fuel pump)
JWT C2 cams rev Base Circle & Titan Valves

40 to 332

OK, that makes four. I'll send a PM to filip00 asking how he would like to be paid once the group buy closes. We'll also have to decide which member will take delivery of the bulk order from filip00 for distribution to the other members once the product arrives from overseas. I'd be prepared to take on that role, with the understanding that: i) the shipping charges from Canada (... where I live) will likely be higher than shipping within the U.S.A.and, ii) some cross-border duty charges and/or delays could apply. If someone else is willing to take on the role, let us know. Obviously, we'll need to let filip00 know who to ship to.

nis350

Just saw your post... please add me to the list.

I don't know anything about international shipping cost. Any idea/estimate what the "total" shipping cost will be like. I am in SOCAL.

Thanks for your help.

40 to 332

We are now at 5 members. Only one spot remaining.

In terms of shipping costs, I have no idea what the cost will be for the bulk shipment from Europe (Filip00's location) to North America. If it's decided that I will take delivery of the bulk shipment, I can get an estimate of the cost to ship from Canada (my location) to the U.S.A. I'll try to get that information out in the next couple of days.

Once the group buy closes, we'll figure out the payment options. I've already asked Filip00 for his input.