Another Sticky Dash Issue

Spartan 1771

Finally got around to testing this new product out. It should be noted that my Z is out of commission due to an oil leak. Therefore I had to take the pictures in my garage. I rolled down the windows, opened the doors, turned on all my garage lights and had both garage doors open to let in as much light as possible. I also used a work lamp to produce even more light. Because of the issue, I wasn't able to test this out in direct sunlight. So I don't know if it will get sticky when it gets hot.

The product says to spray it directly on the dash. I only wanted to apply it to a specific area, so I opted to spray it directly on a microfiber towel and then wipe the dash with it.

Photo 1
The products I used


Photo 2
The dash before the application


Photo 3
The first application


Photo 4
10 minutes after application


Photo 5
3 hours after second application


Overall I'm pretty happy with the results so far. I'll know more once I can get the car out of the garage and in to direct sunlight.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

nis350

thanks for posting the pics. curious if it turns a bit shiny under the hot sun for a few days?

nis350

thanks for posting the info. the ultimate test is whether it turns shiny under the hot sun for a few days.

filip00

I'll post an update in a few weeks. Before I took the photo it had a full day under the sun.

Spartan 1771

Three days later and it still looks pretty good. I'm looking forward to getting the car back in to the sunlight to see how it holds up under those conditions.

Sent from my SM-G781U using Tapatalk

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

nis350

any good news? still looking good? thanks.

SG4247

I ve been driving mine a few weeks now and even made a trip to the track and the dash looks perfect!

Photo is a little grainy but it is the same as the apillar in the photo.

No oil slicks on it thank god.

Attached Images

6E12ABCA-FFAF-4439-8B12-FF44B076FE1B.jpg (290.3 KB, 34 views)

__________________
NA on E85 - 12.669 @ 110 mph (stock fuel pump)
100 shot E85 - 11.589 @ 117 mph (DW fuel pump)
JWT C2 cams rev Base Circle & Titan Valves

Spartan 1771

It's been two weeks since I treated a section of he passenger side dash with Optimum. It's been in the garage this entire time and still looks good.

Pic 1 - Immediately before pulling it out of the cool garage



Pic 2 - In the 85 degree sun for 20 minutes. The treated and untreated areas both got sticky again.



Pic 3 - After being back in the cool garage for 30 minutes. The dash is no longer sticky at all and you can visibly see the difference between the treated and untreated sections


The verdict - This product restores the dried out white faded effect, but does not prevent it from getting sticky in the warm sun.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

Spartan 1771

So your product completely solved this issue? No fading and no sticky dash, no matter the temperature or level of sunlight?

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

nis350

thanks for posting the results. My guess is that it will likely to become more sticky as it exposes more time under the sun, perhaps days or weeks.

filip00

So far so good, color good and not sticky. Although, I can't yet tell regarding sunlight, as it was only 1 day where I left it in sunlight for several hours. Other than that, it was either a shorter drive or night.

Spartan 1771

What was the outdoor temperature when you had the car outside?

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

filip00

Wasn't that warm around 20°C ~ 70F.
I'll post an update when it gets warmer and the car sees some more sun and heat.

nis350

any update on the results? Thanks.

nis350

how's your dash look now? Thx.