Another Sticky Dash Issue

Spartan 1771

Finally got around to testing this new product out. It should be noted that my Z is out of commission due to an oil leak. Therefore I had to take the pictures in my garage. I rolled down the windows, opened the doors, turned on all my garage lights and had both garage doors open to let in as much light as possible. I also used a work lamp to produce even more light. Because of the issue, I wasn't able to test this out in direct sunlight. So I don't know if it will get sticky when it gets hot.

The product says to spray it directly on the dash. I only wanted to apply it to a specific area, so I opted to spray it directly on a microfiber towel and then wipe the dash with it.

Photo 1
The products I used


Photo 2
The dash before the application


Photo 3
The first application


Photo 4
10 minutes after application


Photo 5
3 hours after second application


Overall I'm pretty happy with the results so far. I'll know more once I can get the car out of the garage and in to direct sunlight.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...