How i remove the triple gauges in dash ?

Tractionless · 01-13-2019, 10:51 AM

Quote:

Originally Posted by Girald

[IMG]

Best yet!

Does anything need to be done ECM-wise for the "dead end" now present at the gauges?

Girald · 01-25-2020, 11:20 PM

Quote:

Originally Posted by Tractionless

Best yet!

Does anything need to be done ECM-wise for the "dead end" now present at the gauges?

not sure what you mean by dead end. the defi bf runs off its own controller..
so you have:
--the 3 (more ore less) gauges daisy chained to each other,
--1 defi BF controller
--the wiring and sensors that came with the gauges.

I did make some videos (hell they SUCK BAD w the commentary, but still good info and visuals of the progress)

heres a vid with a basic summary of some of the gauge work.. find my older vids and you should see a lot of the work and results.

https://www.youtube.com/watch?v=FUKDwphHklQ

hope that helps..

Cool Raptor · 02-09-2020, 08:16 PM

Apparently it’s a lot easier than people think.

1. Pop off shift boot holder (matte chrome part) and undo screws
2. Remove screws holding middle dash with screen/storage
3. Within where the storage was, there should be a screw, once removed you can pull each pod out

scope22 · 02-10-2020, 07:16 AM

There are more screws deep inside the dash that you can't reach without removing the whole dash

Quote:

Originally Posted by Cool Raptor

Apparently it’s a lot easier than people think.

1. Pop off shift boot holder (matte chrome part) and undo screws
2. Remove screws holding middle dash with screen/storage
3. Within where the storage was, there should be a screw, once removed you can pull each pod out

370Tyler · 02-21-2020, 10:48 AM

Quote:

Originally Posted by Girald

My work in progress
https://www.facebook.com/photo.php?f...&theater&ifg=1

hey my good sir the link doesnt work but that looks insane how are you getting the gauges out in the first pic

Girald · 05-06-2020, 02:53 AM

yeah, the gauges are basically 1 long bar that spans the length of the 3 gauge holes.. with circular protrusions ( the gauges) its 1 big plastic piece that needs to be cut into pieces and removed.

then you can dremel away enough space to tightly fit and epoxy the new gauges to the dash itself.

look for girald_s channel in youtube ive got some crappy videos on how i did the job...

the gauge wiring is enough to power the new gauges .. its fairly straight forward once you get the courage to destroy the oem

dts3 · 05-06-2020, 04:23 AM

I'm also one of the people who decided to rip it out. I literally shredded it with some pliers

02-09-2020, 08:16 PM	#18 (permalink)
Cool Raptor Base Member Join Date: Apr 2019 Location: Kansas City Posts: 1 Drives: 11 Nissan 370z M6 Rep Power: 6	Apparently it’s a lot easier than people think. 1. Pop off shift boot holder (matte chrome part) and undo screws 2. Remove screws holding middle dash with screen/storage 3. Within where the storage was, there should be a screw, once removed you can pull each pod out Optimiser and fatso666 like this.

05-06-2020, 02:53 AM	#21 (permalink)
Girald Base Member Join Date: Jun 2017 Location: Denver Posts: 134 Drives: 15' 370z SpTech 6MT Rep Power: 3362	yeah, the gauges are basically 1 long bar that spans the length of the 3 gauge holes.. with circular protrusions ( the gauges) its 1 big plastic piece that needs to be cut into pieces and removed. then you can dremel away enough space to tightly fit and epoxy the new gauges to the dash itself. look for girald_s channel in youtube ive got some crappy videos on how i did the job... the gauge wiring is enough to power the new gauges .. its fairly straight forward once you get the courage to destroy the oem __________________ AAM tt'ed // Soon: Moving back to the East Coast

05-06-2020, 04:23 AM	#22 (permalink)
dts3 Track Member Join Date: May 2018 Location: Farmington Hills, MI Posts: 599 Drives: 08 Expedition Rep Power: 6764	I'm also one of the people who decided to rip it out. I literally shredded it with some pliers __________________ Visit my blog! www.LeftoverPi.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] 3 dash mounted oem gauges	pitbull1981	Parts for sale (Private Classifieds)	6	02-04-2015 01:30 PM
3 center gauges... easy way to remove?	Cell	Exterior & Interior	2	12-15-2012 12:29 PM
i do not know how to remove the tri gauges	min	DIY Section (Do-It-Yourself)	1	07-13-2011 11:48 AM
Triple Black	travnflorida	Member's 370Z Gallery	0	04-27-2011 03:14 PM
Help. Need to remove dash.	TreeSemdyZee	Exterior & Interior	12	05-12-2010 09:29 PM