Spawn Aero B pillars - New prices and styles.

SpawnAeroJohn · 10-15-2009, 01:19 PM

Hello all! In an attempt to compete better with competitors we are offering new styles and prices ranges for those of you who have different tastes. All styles involve real carbon fiber and or kevlar.

PLEASE NOTE - Any orders placed before today are not affected by our new changes in set types.

Basic Set $149.99 (colored carbon / kevlar is +$10)
The basic B pillar as of today will be made of 1 layer of carbon fiber and 3 layers of fiberglass. This option is for anybody who just wants the look of carbon fiber or feels that the weight difference of a few oz does not matter.

Advanced Set $169.99 (colored carbon / kevlar is +$15)
This is for those who want a little more carbon fiber. This consists of two layers of carbon fiber and two layers of fiberglass.

Premium Set $199.99 (colored carbon / kevlar is +$20)
This is for those who want a pure real 100% carbon fiber part. These pieces are made from 4 layers of 2x2 twill carbon fiber. The lightest and strongest.

The colors we have to offer...

standard black carbon fiber
blue carbon / kevlar
red carbon / kevlar
green carbon / kevlar
yellow carbon / kevlar
orange carbon / kevlar
and hexcel texelium (silver carbon fiber)

All B pillar sets are made with premium grade epoxy, UV resistant gel coat, and topped with two layers of UV resistant clear coat. Everything we make is vacuum infused so you are assured the highest quality! Yes our prices are a little more expensive but you really do get what you pay for. In this case quality. If you have a set of our competitors set and would like to get a set of ours we will give you 10% off if you prove to us you have our competitors set.

Also yes, these B pillars are direct replacements not overlays.

Below are some pictures to show the amazing up close quality!

P.S we know we have another thread in this section of the forums but we have asked for it to be closed since we now have this fresh thread.

SpawnAeroJohn · 10-15-2009, 01:20 PM

Thank you to Mike (AKA Bullitt5897) for uploading a DIY video on installing our B pillars. Kepe in mind the glue on the sides of the b pillars were accdentally put by us to help secure the 3M tape.

Give him plenty of rep!!!

http://www.youtube.com/watch?v=n3iM9yJ4M2U

http://www.youtube.com/watch?v=HMWU7-Ymi8k

http://www.youtube.com/watch?v=Bt8Ap8c7BW4

http://www.youtube.com/watch?v=cKVwWDxA_Uw

Other then that if anybody installs it this way and can measure the exact distance from each corner to the fastener clip as well as the height each clip needs to be placed. We then can install them on future orders. Its very easy to DIY but we would like to be able to offer that to customers.

phelan · 10-15-2009, 01:31 PM

whoaaaa....red carbon?? do want pics john!

370Zsteve · 10-15-2009, 01:39 PM

Do these glue on over the existing or do you remove the existing and then glue them on?

Pardon my ignorance

phelan · 10-15-2009, 02:09 PM

Quote:

Originally Posted by 370Zsteve

Do these glue on over the existing or do you remove the existing and then glue them on?

Pardon my ignorance

Double sided tape probably? I think they could also be complete replacements if I remember right.

SpawnAeroJohn · 10-15-2009, 04:30 PM

Direct replacements!!! They can be glued over the top like other but since these arent meant to be overlays. They would stick out a little.

Here is what red carbon fiber looks like. Its a carbon / kevlar mix.

http://compositeenvisions.com/images...ar%20panel.jpg

SpawnAeroJohn · 10-16-2009, 09:38 AM

PMs replied

WShade · 10-16-2009, 09:46 AM

Quote:

Originally Posted by SpawnAeroJohn

Here is what red carbon fiber looks like. Its a carbon / kevlar mix.
http://compositeenvisions.com/images...ar%20panel.jpg

Thats hot!

2theextreme · 10-16-2009, 12:08 PM

Blue? Did someone say BLUE??? I havent installed the black CF B pillars yet....might just hold off for the blue ones now!

MacDaddy · 10-16-2009, 10:12 PM

John,

How about getting the products that have been paid for out first before y'all go tearin off into something new??? I for one have been 3+ months patient and still only have half of what was ordered yet you guys are talking door handles, hoods, mirrors and what ever else. You made the statement originally that you would not get ahead of yourselves, well guess what that ain't happening. As far as my b-pillars they will be coming back to you for the manufacture defect on the driver's side. I have tried to keep this back channel but after fronting money and hearing promise after promise, enough is enough, what I waited 3+ months for was not worth my time.

370Zsteve · 10-16-2009, 10:16 PM

Quote:

Originally Posted by SpawnAeroJohn

Direct replacements!!! They can be glued over the top like other but since these arent meant to be overlays. They would stick out a little.

Here is what red carbon fiber looks like. Its a carbon / kevlar mix.

http://compositeenvisions.com/images...ar%20panel.jpg

Nice. Could you do us a favor and post a few more pics but of the whole car with b-pillars installed so we can get agood perspective on looks? Thanks!

SpawnAeroJohn · 10-16-2009, 10:30 PM

Quote:

Originally Posted by MacDaddy

John,

How about getting the products that have been paid for out first before y'all go tearin off into something new??? I for one have been 3+ months patient and still only have half of what was ordered yet you guys are talking door handles, hoods, mirrors and what ever else. You made the statement originally that you would not get ahead of yourselves, well guess what that ain't happening. As far as my b-pillars they will be coming back to you for the manufacture defect on the driver's side. I have tried to keep this back channel but after fronting money and hearing promise after promise, enough is enough, what I waited 3+ months for was not worth my time.

I asked you to send pictures of the defect. You said only one had a defect in it and you havnt showed me pictures. PMed bud!

SpawnAeroJohn · 10-16-2009, 10:47 PM

Here is a blue B pillar we made on a weekend.

This wasnt wet sanded or polished. It was just for show.

2theextreme · 10-16-2009, 10:50 PM

Quote:

Originally Posted by SpawnAeroJohn

Here is a blue B pillar we made on a weekend.

This wasnt wet sanded or polished. It was just for show.

I do like it!

tonmed123 · 10-21-2009, 09:25 AM

BUMP!!! Whats up, John been outta town havent had time to review posts but any ETA on my pillars. Peace

10-15-2009, 01:19 PM	#1 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	Spawn Aero B pillars - New prices and styles. Hello all! In an attempt to compete better with competitors we are offering new styles and prices ranges for those of you who have different tastes. All styles involve real carbon fiber and or kevlar. PLEASE NOTE - Any orders placed before today are not affected by our new changes in set types. Basic Set $149.99 (colored carbon / kevlar is +$10) The basic B pillar as of today will be made of 1 layer of carbon fiber and 3 layers of fiberglass. This option is for anybody who just wants the look of carbon fiber or feels that the weight difference of a few oz does not matter. Advanced Set $169.99 (colored carbon / kevlar is +$15) This is for those who want a little more carbon fiber. This consists of two layers of carbon fiber and two layers of fiberglass. Premium Set $199.99 (colored carbon / kevlar is +$20) This is for those who want a pure real 100% carbon fiber part. These pieces are made from 4 layers of 2x2 twill carbon fiber. The lightest and strongest. The colors we have to offer... standard black carbon fiber blue carbon / kevlar red carbon / kevlar green carbon / kevlar yellow carbon / kevlar orange carbon / kevlar and hexcel texelium (silver carbon fiber) All B pillar sets are made with premium grade epoxy, UV resistant gel coat, and topped with two layers of UV resistant clear coat. Everything we make is vacuum infused so you are assured the highest quality! Yes our prices are a little more expensive but you really do get what you pay for. In this case quality. If you have a set of our competitors set and would like to get a set of ours we will give you 10% off if you prove to us you have our competitors set. Also yes, these B pillars are direct replacements not overlays. Below are some pictures to show the amazing up close quality! P.S we know we have another thread in this section of the forums but we have asked for it to be closed since we now have this fresh thread. Last edited by SpawnAeroJohn; 10-15-2009 at 04:31 PM.

10-15-2009, 01:20 PM	#2 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	Thank you to Mike (AKA Bullitt5897) for uploading a DIY video on installing our B pillars. Kepe in mind the glue on the sides of the b pillars were accdentally put by us to help secure the 3M tape. Give him plenty of rep!!! http://www.youtube.com/watch?v=n3iM9yJ4M2U http://www.youtube.com/watch?v=HMWU7-Ymi8k http://www.youtube.com/watch?v=Bt8Ap8c7BW4 http://www.youtube.com/watch?v=cKVwWDxA_Uw Other then that if anybody installs it this way and can measure the exact distance from each corner to the fastener clip as well as the height each clip needs to be placed. We then can install them on future orders. Its very easy to DIY but we would like to be able to offer that to customers. Last edited by SpawnAeroJohn; 10-15-2009 at 01:30 PM.

10-15-2009, 01:31 PM	#3 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	whoaaaa....red carbon?? do want pics john! __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

10-15-2009, 01:39 PM	#4 (permalink)
370Zsteve A True Z Fanatic Join Date: Sep 2009 Location: Gold Coast CT Posts: 10,599 Drives: 2019 Corvette G.S. Rep Power: 42	Do these glue on over the existing or do you remove the existing and then glue them on? Pardon my ignorance __________________ SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

10-16-2009, 12:08 PM	#9 (permalink)
2theextreme RIP Tony :( (1969-2015) Join Date: Feb 2009 Location: Northern Virginia Posts: 18,802 Drives: '14 Mustang GT/CS Rep Power: 67	Blue? Did someone say BLUE??? I havent installed the black CF B pillars yet....might just hold off for the blue ones now! __________________ SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips

10-15-2009, 04:30 PM	#6 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	Direct replacements!!! They can be glued over the top like other but since these arent meant to be overlays. They would stick out a little. Here is what red carbon fiber looks like. Its a carbon / kevlar mix. http://compositeenvisions.com/images...ar%20panel.jpg

10-16-2009, 09:38 AM	#7 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	PMs replied

10-16-2009, 10:12 PM	#10 (permalink)
MacDaddy Base Member Join Date: May 2009 Location: NRH2O, Texas Posts: 32 Drives: 09 370Z MB 7AT Rep Power: 15	John, How about getting the products that have been paid for out first before y'all go tearin off into something new??? I for one have been 3+ months patient and still only have half of what was ordered yet you guys are talking door handles, hoods, mirrors and what ever else. You made the statement originally that you would not get ahead of yourselves, well guess what that ain't happening. As far as my b-pillars they will be coming back to you for the manufacture defect on the driver's side. I have tried to keep this back channel but after fronting money and hearing promise after promise, enough is enough, what I waited 3+ months for was not worth my time. Wonka2581 likes this. Last edited by MacDaddy; 10-16-2009 at 10:16 PM.

10-16-2009, 10:47 PM	#13 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	Here is a blue B pillar we made on a weekend. This wasnt wet sanded or polished. It was just for show.

10-21-2009, 09:25 AM	#15 (permalink)
tonmed123 Base Member Join Date: Apr 2009 Location: Houston,Texas Posts: 223 Drives: 09 370Z Red M6 Rep Power: 267	BUMP!!! Whats up, John been outta town havent had time to review posts but any ETA on my pillars. Peace __________________ 09,Solid Red,MT,Tour/Sport,Nav,3M Clear bra,35% Ceramic tint,Stillen sways,F.I. (HFC's,18 RES's,CBE), SpawnCFB pillars; Injen BLK CAI

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: SpawnAero CF B-Pillars	bullitt5897	DIY Section (Do-It-Yourself)	28	05-04-2011 02:02 PM
Carbon fiber roof by Spawn Aerodynamics	SpawnAeroJohn	Body Interior/Exterior	10	02-12-2010 10:41 AM
Spawn Aerodynamics official price list for the370z.com	SpawnAeroJohn	Body Interior/Exterior	12	12-20-2009 05:39 AM
Spawn Aerodynamics - Bullittes CF build thread.	SpawnAeroJohn	Nissan 370Z General Discussions	195	11-02-2009 01:13 PM