Spawn Aerodynamics official price list for the370z.com

SpawnAeroJohn · 08-08-2009, 11:25 PM

All products are guaranteed for life and all prices have the possibility to fluctuate with demand and the economy. All those who have ordered at a certain price will not be charged extra if price has gone up. Get em while their hot!

Carbon Fiber B Pillars!
These are replacements not overlays.
MSRP $250.00 - Your price $199.99 + free shipping!
__________________________________________________ __________________________________

Carbon Fiber Front Valance!
This covers the matte finish license plate backing that runs across the bumper center.

MSRP $250.00 - Your price $149.99 + free shipping
__________________________________________________ __________________________________

Carbon Fiber Roof Cap!
This installs over the roof and sits underneath the A pillars to make it a flush perfect fit.

MSRP $800 - Your price $650.00 + shipping
__________________________________________________ __________________________________

Carbon Fiber Rear Valance
This covers the outlined area on the rear bumper that is above and around the exhaust pipes and rear fog lamp.

MSRP $650 - Your price $500 + $25 for shipping
__________________________________________________ __________________________________
Pictures coming soon!

chriztrax · 08-13-2009, 02:30 PM

can't wait to see pics of an installed cf rear valance. that will be my deciding factor.

PyroCustoms · 08-15-2009, 06:43 PM

Sweet, I was wondering about something for the front valance.

roddy · 08-16-2009, 02:19 PM

the guarantee mentioned above. does that cover browning/fading?

SpawnAeroJohn · 08-16-2009, 04:54 PM

^ Its a gray area. If it abnormally browns or fades then yes. If it happens over a period of several years then no because you need to take care of the panel. Polish, wax, etc. The panels shouldnt brown or fade because we spray over a dupong clear coat over that to protect it from those exact reasons, but if you take care of it, it should last a life time. Other then that since its cleared with the same type of clear that is already on your cars, if you treat it like most people treat their cars. Just wash it when it gets dirty, park it in the sun all day through all weather, nothing more than 4 wheels and an engine, then it will fade along with the rest of the paint on the car.

Eman · 08-17-2009, 03:30 PM

Quote:

Originally Posted by chriztrax

can't wait to see pics of an installed cf rear valance. that will be my deciding factor.

I would like to see a pic of this as well. Would this be a direct swap of the stock piece?

bullitt5897 · 08-18-2009, 11:37 PM

The rear valence product will be an overlay... the OEM bumper valence is not detachable.

shabarivas · 08-19-2009, 12:47 AM

Could you make me an overlay that covered the fog light? I would be all over that

Asheth · 08-19-2009, 01:07 AM

do you have like a farther out picture or one that shows how it looks on the car as a whole especially the license plate back

mrmixitup · 08-31-2009, 12:03 AM

How does the carbon fiber rear valance overlay stay attached?

Shunya · 08-31-2009, 12:23 AM

Quote:

Originally Posted by mrmixitup

How does the carbon fiber rear valance overlay stay attached?

3m is your friend lol

bullitt5897 · 09-01-2009, 02:33 PM

Talked to John a few minutes ago. The original orders for B pillars will be going out thursday. The last set should be built today leaving tomorrow for dipping and clear coating. Once they are dry and go through Spawn Aero's quality check process they will be packaged and shipped. John and team are working hard guys and we should have our parts SOON!!!

John has also had other forums and clients sending them parts for work to be done. They are working hard to get these parts out so lets have a lil more patience... I cant wait to get mine

370Zsteve · 12-20-2009, 05:39 AM

Quote:

Originally Posted by bullitt5897

Talked to John a few minutes ago. The original orders for B pillars will be going out thursday. The last set should be built today leaving tomorrow for dipping and clear coating. Once they are dry and go through Spawn Aero's quality check process they will be packaged and shipped. John and team are working hard guys and we should have our parts SOON!!!

John has also had other forums and clients sending them parts for work to be done. They are working hard to get these parts out so lets have a lil more patience... I cant wait to get mine

08-08-2009, 11:25 PM	#1 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	Spawn Aerodynamics official price list for the370z.com All products are guaranteed for life and all prices have the possibility to fluctuate with demand and the economy. All those who have ordered at a certain price will not be charged extra if price has gone up. Get em while their hot! Carbon Fiber B Pillars! These are replacements not overlays. MSRP $250.00 - Your price $199.99 + free shipping! __________________________________________________ __________________________________ Carbon Fiber Front Valance! This covers the matte finish license plate backing that runs across the bumper center. MSRP $250.00 - Your price $149.99 + free shipping __________________________________________________ __________________________________ Carbon Fiber Roof Cap! This installs over the roof and sits underneath the A pillars to make it a flush perfect fit. MSRP $800 - Your price $650.00 + shipping __________________________________________________ __________________________________ Carbon Fiber Rear Valance This covers the outlined area on the rear bumper that is above and around the exhaust pipes and rear fog lamp. MSRP $650 - Your price $500 + $25 for shipping __________________________________________________ __________________________________ Pictures coming soon! NismoZ3409 likes this.

08-15-2009, 06:43 PM	#3 (permalink)
PyroCustoms A True Z Fanatic Join Date: Aug 2009 Location: AZ Posts: 2,510 Drives: Rides: A Pale Horse Rep Power: 21	Sweet, I was wondering about something for the front valance. __________________ I'll figure something out later. Who are you? where am I? Stop! I need an adult! The feathers in the rear are softer than you think.

08-18-2009, 11:37 PM	#7 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	The rear valence product will be an overlay... the OEM bumper valence is not detachable. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

08-19-2009, 01:07 AM	#9 (permalink)
Asheth Track Member Join Date: Dec 2008 Location: Glen Burnie, Maryland Posts: 917 Drives: 09 Blk 6mt Rep Power: 17	do you have like a farther out picture or one that shows how it looks on the car as a whole especially the license plate back __________________ 180 customs Headlights - Yantech Backup Camera - Projekt 1 - Stillen Gen 3- EVO-R V2 Foglight, EVO-R CF Diffuser, Carbon Fiber Element Steering wheel - Fast Intentions TDX/RHFC's - RJM A.F.P. - Z1 Oil Cooler - 2015 Nismo Conversion.

09-01-2009, 02:33 PM	#12 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Talked to John a few minutes ago. The original orders for B pillars will be going out thursday. The last set should be built today leaving tomorrow for dipping and clear coating. Once they are dry and go through Spawn Aero's quality check process they will be packaged and shipped. John and team are working hard guys and we should have our parts SOON!!! John has also had other forums and clients sending them parts for work to be done. They are working hard to get these parts out so lets have a lil more patience... I cant wait to get mine __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

08-13-2009, 02:30 PM	#2 (permalink)
chriztrax Base Member Join Date: Aug 2009 Location: Bay Area Posts: 1 Drives: TBD Rep Power: 15	can't wait to see pics of an installed cf rear valance. that will be my deciding factor.

08-16-2009, 02:19 PM	#4 (permalink)
roddy Base Member Join Date: Aug 2009 Location: san jose, ca Posts: 5 Drives: 240sx, mazda3 Rep Power: 15	the guarantee mentioned above. does that cover browning/fading?

08-16-2009, 04:54 PM	#5 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	^ Its a gray area. If it abnormally browns or fades then yes. If it happens over a period of several years then no because you need to take care of the panel. Polish, wax, etc. The panels shouldnt brown or fade because we spray over a dupong clear coat over that to protect it from those exact reasons, but if you take care of it, it should last a life time. Other then that since its cleared with the same type of clear that is already on your cars, if you treat it like most people treat their cars. Just wash it when it gets dirty, park it in the sun all day through all weather, nothing more than 4 wheels and an engine, then it will fade along with the rest of the paint on the car.

08-19-2009, 12:47 AM	#8 (permalink)
shabarivas A True Z Fanatic Join Date: Apr 2009 Location: Sacramento, CA Posts: 2,188 Drives: 370z MB 6mt Rep Power: 914	Could you make me an overlay that covered the fog light? I would be all over that

08-31-2009, 12:03 AM	#10 (permalink)
mrmixitup Base Member Join Date: Jun 2009 Location: OK Posts: 117 Drives: 09 White 370Z 6M Spt Rep Power: 275	How does the carbon fiber rear valance overlay stay attached?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The German 370z - brouchure & price list	Urban	Nissan 370Z Owners Manual / Service Manuals	13	08-02-2010 05:47 PM
Carbon fiber roof by Spawn Aerodynamics	SpawnAeroJohn	Body Interior/Exterior	10	02-12-2010 10:41 AM
Spawn Aerodynamics - Bullittes CF build thread.	SpawnAeroJohn	Nissan 370Z General Discussions	195	11-02-2009 01:13 PM
The German 370z - brouchure & price list	Urban	Nissan 370Z General Discussions	16	07-09-2009 10:37 AM