FIXED: Rear axle click clunk noise

Originally Posted by juld0zer

The M77 grease is to be applied to the flat face of the outer CV only. Not the splines. The flat face is the face which butts up against the hub. It's approx 10mm wide. There is a TSB for the 370Z and many Nissan models. The TSB will
have photos that tell you where to put the grease.

Follow the specified amount - weigh the tube using digital scales before applying and during application to determine when you have administered enough grease.

From memory, i took the axles out to do the greasing because i couldnt get enough room to properly see where i was applying it. Dont take chances, order the mandatory replacement fasteners

As i said earlier, this did not solve my problem but by all means try it out if you have access to the grease.