05-09-2014, 12:19 AM
|
#25 (permalink)
|
|
Premium Member
Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324200
|
Quote:
Originally Posted by Limeybastard
Doing the later just now. Waiting for most of it to drain. Gonna push the other end of the screw driver out also for better grip being careful not to put an hole on the hose. Lol
Sent from my SM-N900T using Tapatalk
|
When you put the new filter back on, put a little bit of oil on the gasket (the used oil works great) and only tighten hand tight. A good rule-of-thumb is to screw the filter on until the gasket just touches the engine and then an eighth to a quarter turn more. Check for leaks. Tighten ~1/16 of a turn as needed. Do that and it will be MUCH easier to remove the filter next time.
|
|
|
Similar Threads
52Likes
Threaded Mode
