In some serious trouble, it broke...

Joepro · 04-01-2014, 06:27 PM

well I threw in the towel for today, 74 degrees outside and I was stuck in the shop with a broken car, btw, my 2 techs one has a 530 whp 11 second neon build from the groud up from a wrenched neon, 5 years in the making so far, and the other has a 500 + whp vette, so I value both of their opinions, great guys they are! I gonna borrow a noise/vibration analyzer from our GM store, im not gonna hold my breath with it but it supposed to be able to tell you the type of vibration by its frequency and oscillation...btw the scanner was universal but it reads live data, I couldn't see anything out of the ordinary.

elperuano · 04-01-2014, 06:50 PM

Talk about mind boggling.

OldBoy · 04-01-2014, 08:14 PM

This problem IMO is one of 2 things:

1. Seeing as Selena Gomez is on top of the page and it's the 1st of April, you're pulling our leg and your car is actually fine. I hope this is the case.

or 2. Clutch/Flywheel defect. You lost a balancing weight, a piece of the clutch disc broke off or one of the pressure plate fingers is damaged (unlikely). All of these wouldn't show visual signs threw the peep hole in the trans, probably not much more noise and possibly wouldn't affect the Crank Sensor as it would only offset the weight on one side affecting the centrifugal force and not the rotational speed of the engine. Add the extra stiff mounts and you get a pleasant shutter in the car that is worst at certain RPMs (frequencies).

I would pull the transmission, specially if you have access to a lift and a transmission jack.

Joepro · 04-01-2014, 08:23 PM

Trans pull is the current avenue, its on a lift at work, today was my day off, I have a southbend clutch/flywheel setup so I am not sure how the flywheel is weighted, I work through the rest of the week but I will try to work on it an hour or 2 in the afternoon, after the turbo parts are out of the way I can drop the trans pretty fast, I really hope thats it so I can get something in and make my tune date.

Mitco39 · 04-02-2014, 09:06 AM

Maybe give Joe at Zspeed a call and quiz him on the flywheels and if he thinks it even possible for something like that to happen. It might be possible I guess if there is some sort of balancing weights on the flywheel. I cant remember mine when I installed it, I didnt play that close of attention to it.

Joepro · 04-02-2014, 12:53 PM

Well I wasted all day yesterday, but found it, the pressure plate broke.

Chuck33079 · 04-02-2014, 12:55 PM

Quote:

Originally Posted by Joepro

Well I wasted all day yesterday, but found it, the pressure plate broke.

As weird as it sounds to say, I'm really happy for you. That's a much cheaper and easier fix than something internal to the motor. It had to have been a manufacturing defect, right? 1k miles of boost on the canned tune shouldn't kill a clutch.

zefaulter · 04-02-2014, 01:09 PM

Nice glad you figured what's going on

fuct · 04-02-2014, 01:29 PM

didnt we just have a fellow member with a broken clutch issue? what brand was that?

Joepro · 04-02-2014, 01:48 PM

Joe took care of me I I knew he would, I did upgrade the disk, but he called Southbend for me and is getting it replaced!

Chuck33079 · 04-02-2014, 01:49 PM

Quote:

Originally Posted by Joepro

Joe took care of me I I knew he would, I did upgrade the disk, but he called Southbend for me and is getting it replaced!

Good deal, man. Can you still make your tune assuming the parts get to you soon?

Joepro · 04-02-2014, 01:52 PM

Ya should have the parts by the weekend hopefully back together sat should give me enough time to break it in.

Mitco39 · 04-02-2014, 01:58 PM

Glad to hear man. Thats awesome news!

Juan@Fontana · 04-02-2014, 02:06 PM

Glad to hear you found the problem before clutch fragments started flying through the bellhousing and cutting limbs. good luck with the tune!

-Juan

Joepro · 04-02-2014, 04:07 PM

snap went the strap...

04-01-2014, 06:27 PM	#61 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	well I threw in the towel for today, 74 degrees outside and I was stuck in the shop with a broken car, btw, my 2 techs one has a 530 whp 11 second neon build from the groud up from a wrenched neon, 5 years in the making so far, and the other has a 500 + whp vette, so I value both of their opinions, great guys they are! I gonna borrow a noise/vibration analyzer from our GM store, im not gonna hold my breath with it but it supposed to be able to tell you the type of vibration by its frequency and oscillation...btw the scanner was universal but it reads live data, I couldn't see anything out of the ordinary. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-01-2014, 06:50 PM	#62 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	Talk about mind boggling. TreeSemdyZee likes this.

04-01-2014, 08:23 PM	#64 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	Trans pull is the current avenue, its on a lift at work, today was my day off, I have a southbend clutch/flywheel setup so I am not sure how the flywheel is weighted, I work through the rest of the week but I will try to work on it an hour or 2 in the afternoon, after the turbo parts are out of the way I can drop the trans pretty fast, I really hope thats it so I can get something in and make my tune date. zefaulter likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-02-2014, 09:06 AM	#65 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 131	Maybe give Joe at Zspeed a call and quiz him on the flywheels and if he thinks it even possible for something like that to happen. It might be possible I guess if there is some sort of balancing weights on the flywheel. I cant remember mine when I installed it, I didnt play that close of attention to it. Fountainhead likes this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

04-02-2014, 12:53 PM	#66 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	Well I wasted all day yesterday, but found it, the pressure plate broke. TerribleONE, phunk, jaytirbhaw and 10 others like this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-01-2014, 08:14 PM	#63 (permalink)
OldBoy Base Member Join Date: Feb 2012 Location: Ontario Posts: 61 Drives: '10 Nissan 370Z M6 Rep Power: 13	This problem IMO is one of 2 things: 1. Seeing as Selena Gomez is on top of the page and it's the 1st of April, you're pulling our leg and your car is actually fine. I hope this is the case. or 2. Clutch/Flywheel defect. You lost a balancing weight, a piece of the clutch disc broke off or one of the pressure plate fingers is damaged (unlikely). All of these wouldn't show visual signs threw the peep hole in the trans, probably not much more noise and possibly wouldn't affect the Crank Sensor as it would only offset the weight on one side affecting the centrifugal force and not the rotational speed of the engine. Add the extra stiff mounts and you get a pleasant shutter in the car that is worst at certain RPMs (frequencies). I would pull the transmission, specially if you have access to a lift and a transmission jack.

04-02-2014, 01:09 PM	#68 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 27	Nice glad you figured what's going on

04-02-2014, 01:29 PM	#69 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	didnt we just have a fellow member with a broken clutch issue? what brand was that?

04-02-2014, 01:48 PM	#70 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	Joe took care of me I I knew he would, I did upgrade the disk, but he called Southbend for me and is getting it replaced! GaleForce and Hotrodz like this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-02-2014, 01:52 PM	#72 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	Ya should have the parts by the weekend hopefully back together sat should give me enough time to break it in. Chuck33079 likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 04-02-2014 at 01:55 PM.

04-02-2014, 01:58 PM	#73 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 131	Glad to hear man. Thats awesome news! Chuck33079 likes this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

04-02-2014, 02:06 PM	#74 (permalink)
Juan@Fontana Enthusiast Member Join Date: Nov 2013 Location: Fontana Posts: 315 Drives: Z32 Rep Power: 21	Glad to hear you found the problem before clutch fragments started flying through the bellhousing and cutting limbs. good luck with the tune! -Juan

04-02-2014, 04:07 PM	#75 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	snap went the strap... __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP Broke DOWN!!	ANMVQ	Forced Induction	108	03-24-2013 05:13 AM
Yep. Broke My Rib.	CBRich	The Lounge (Off Topic)	18	09-05-2010 07:33 AM
Z Broke Down :(	FuszNissan	Nissan 370Z General Discussions	318	09-15-2009 06:58 AM
Having trouble picking a Z.. and having trouble with the manual	AceSpade77	Nissan 370Z General Discussions	12	08-04-2009 04:02 PM
my Z broke down	sideburnZ	Nissan 370Z General Discussions	32	05-26-2009 09:33 AM