Transmission won't shift if . . . .

Rockhound · 02-18-2014, 08:54 PM

I haven't experienced anything like this. I know there's a TSB on the 7AT from 2013 (13-001A) - it includes reprogramming the transmission control module, but centers around a specific error code (P0710).

2013 z service bulletin 13-001a

My '13 7AT had an unrelated ECU error code last fall, and I had the dealer apply this TSB while I was there. I haven't experienced any issues with manual mode as you describe, though. Your '14 might have this transmission update installed from the factory, though; probably worth a dealer visit.

ktmmike · 02-19-2014, 06:16 AM

. . . and another possibly related question:

On the console, about 1/4 inch forward of the P for park, is some sort of a little round keyhole or receiver for a special tool or something.

1. What is it for?

2. Is it on models previous to 2014 as well?

I can't find it in the owner's manual.

02-19-2014, 06:16 AM	#2 (permalink)
ktmmike Base Member Join Date: Jan 2014 Location: NC/TN Mountains Posts: 36 Drives: '14 370Z Sport Coupe Rep Power: 12	. . . and another possibly related question: On the console, about 1/4 inch forward of the P for park, is some sort of a little round keyhole or receiver for a special tool or something. 1. What is it for? 2. Is it on models previous to 2014 as well? I can't find it in the owner's manual. __________________ 3 KTM SUPERMOTOS & a 2014 370Z Last edited by ktmmike; 02-19-2014 at 07:47 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Transmission problem (?) after a transmission fluid change	EWarren	Engine & Drivetrain	7	07-28-2014 11:44 AM
[FOR SALE] Stock Shift knob & custom CFE shift boot	edub370	Parts for sale (Private Classifieds)	4	08-21-2013 12:23 PM
Shift knob installation? Shift knob recommendations?	Gibby1113	DIY Section (Do-It-Yourself)	21	05-30-2013 07:08 PM
Transmission help	luigi90210	Engine & Drivetrain	2	01-03-2013 06:54 PM
SOLD: 7AT Red/Carbon Shift knob with OEM 6MT Shift boot (SW Florida)	TMAN1985	Parts for sale (Private Classifieds)	8	04-23-2012 09:01 PM

02-18-2014, 08:54 PM	#1 (permalink)
Rockhound Base Member Join Date: Jan 2012 Location: Tulsa, OK Posts: 86 Drives: '13 Z Touring Rep Power: 14	I haven't experienced anything like this. I know there's a TSB on the 7AT from 2013 (13-001A) - it includes reprogramming the transmission control module, but centers around a specific error code (P0710). 2013 z service bulletin 13-001a My '13 7AT had an unrelated ECU error code last fall, and I had the dealer apply this TSB while I was there. I haven't experienced any issues with manual mode as you describe, though. Your '14 might have this transmission update installed from the factory, though; probably worth a dealer visit.