NST (NonStopTuning) 370Z VQ37HR Pulley Kit Review w/ Dyno Charts

SS_Firehawk · 11-13-2013, 02:25 PM

Quote:

Originally Posted by NonStopTuning

FINALLY we have you on board!!!

Thank you for all the continued support you've always showed us, sir!

MIKE @ NST

There were other companies, but they were either way high in pricing or did not want to back their product on a FI'd car.

Zmonster11 · 11-13-2013, 04:26 PM

So does this mean that there is no more underdrive/overdrive pulley kit option no more for the this group buy, just the OEM light weight pulley kit? or are they both available in this group buy? I personally want the underdrive/overdrive pulley kit with the Belt. I guess I would have to pay regular price?

nissan_fan · 11-13-2013, 09:23 PM

What sort of gain will these light weight pulleys yield?
I wanted the under driven set because at some point I want my Z to be my track car.

Chuck33079 · 11-13-2013, 09:27 PM

Quote:

Originally Posted by nissan_fan

What sort of gain will these light weight pulleys yield?
I wanted the under driven set because at some point I want my Z to be my track car.

Dyno charts are in the first post.

nissan_fan · 11-13-2013, 09:40 PM

I thought the dyno sheet on page 1 was for the underdriven set.

Chuck33079 · 11-13-2013, 09:45 PM

Quote:

Originally Posted by nissan_fan

What sort of gain will these light weight pulleys yield?
I wanted the under driven set because at some point I want my Z to be my track car.

Quote:

Originally Posted by nissan_fan

I thought the dyno sheet on page 1 was for the underdriven set.

Sorry, I thought you were asking about the underdriven pulleys, which are also lighter than OEM.

I wouldn't expect a lot of hp gains from the OEM sized ones, just improved throttle response.

nismo13807 · 11-13-2013, 10:01 PM

so whats the pros and cons between the lighter oem pulleys vs the under and over drive pulley? whats the weight difference and power?

nissan_fan · 11-13-2013, 10:05 PM

No problem Chuck. I appreciate you taking the time to reply to my question anyways.

SS_Firehawk · 11-13-2013, 10:11 PM

I would guess around 5-6whp from OEM size. The biggest thing is guys who are supercharged like myself or anyone who doesn't want to slow down anything running such as the power steering pump or water pump. Most of the gains come from the weight savings.

NonStopTuning · 11-13-2013, 10:44 PM

Quote:

Originally Posted by SS_Firehawk

I would guess around 5-6whp from OEM size. The biggest thing is guys who are supercharged like myself or anyone who doesn't want to slow down anything running such as the power steering pump or water pump. Most of the gains come from the weight savings.

This is correct. Most of the gains (hp, tq, response) come from the apx 70% weight savings. The 10% underdrive yields just a little bit more, but not much... maybe another 1-2hp max. The great thing about our underdrive kit is/was the fact that it includes two pulleys, hence more weight reduction.

We are now offering two pulleys in our new CR-Lite (oem size) kit. This kit will yield the kinds of dyno numbers you see on page one of this thread. The pluses are, 1. compatible with all setups: naturally aspirated, turbocharged, supercharged. 2. no need to swap a belt. 3. max weight reduction.

As I stated earlier, the demand does not seem to be there for another production run of our old underdrive kit, hence this attempt to get the GB going with the CR-Lite (oem size) kit.

I certainly hope you guys stay on board with this and help spread the word to get us going. Thanks everyone!

MIKE @ NST

NonStopTuning · 11-13-2013, 10:48 PM

Quote:

OK GUYS & GIRLS, UPDATE!

As you guys know, our deadline for this GB has come and gone. We needed 20 members for this, and unfortunately didn't reach 10.

0. NST - Red Kit
1. Red_Z - Red Kit
2. Minato - Red Kit
3. nismo13807 - Red Kit
4. Huck - Red Kit
5. syntax1269 - Silver
6. Zmonster11 - red kit
7. csprad12 blue kit
8. nissan_fan blue kit
9.
10.

Sadly, this indicates there isn't enough demand for an Underdrive Kit GB at this time.

I don't want to drop this idea completely, so I'm going to propose another idea...

WHAT IF we continue this group buy and switch to a set of lightweight OEM size pulleys (no underdrive, no overdrive.) A lightweight OEM size kit would be compatible with all setups; naturally aspirated, turbocharged, supercharged. Such a kit would also be compatible with your OEM belt, no need to change your belt would also save you another $30 or so, this should help holiday wallet concerns.

An NST CR-Lite (OEM size) Kit would include two pulleys, crank + alternator, and would be about 75% lighter than the OEM pulleys. Price would be the same, and of course, all the custom colors and the free candy would still be in play.

New signup deadline: November 27, 2013.

If we hit 20 members ONE lucky member would still receive their kit free of charge!

I look forward to your replies. If interested in jumping in on this, please copy the latest list above and add your name to the next open spot.

--- MOST RECENT LIST ---

00. NST - Red Kit
01. Red_Z - Red Kit
02. Minato - Red Kit
03. nismo13807 - Red Kit
04. Huck - Red Kit
05. syntax1269 - Silver
06. Zmonster11 - red kit
07. csprad12 blue kit
08. nissan_fan blue kit
09. SS_FireHawk CR-Lite (undecided color)
10. zmanelite red color and belt
11.
12.
13.
14.
15.
.
.
.

We will update with a PAYMENT PAGE when we reach the required number of 20 members.

Again, this is now for our CR-Lite (OEM size crank + alternator) Kit

REGULAR MSRP: $258.00 ... GROUP BUY: $198.00 ... ALMOST 25% OFF!
Belt change NOT required

MIKE @ NST

Huck · 11-13-2013, 11:43 PM

Well dang. Honestly I would much rather a set of underdriven pulleys since I already have a still en lightweight crank pulley. So basically I'll be paying $200 for an alternator pulley. I may stay in, let me think about it and if I'm out I'll update my status.

Zdayz 2014!!

SS_Firehawk · 11-14-2013, 06:03 AM

Corrected... Below.

Huck · 11-14-2013, 06:44 AM

Oh sweet, thanks for clearing that up Firehawk! Definitely still in then.

Zdayz 2014!!

NonStopTuning · 11-14-2013, 09:30 AM

JUST TO CLARIFY:

This group buy is now only for the CR-LITE PULLEY KIT (oem size, lightweight).

There is not enough demand at this time to run two separate production runs and offer both pulley kits at the same time, hence the decision to go with this kit, because it is compatible with ALL setups.

I really think you guys will be very happy with this kit if we reach the required number to go into production.

JUST TO CLARIFY:

This group buy is now only for the CR-LITE PULLEY KIT (oem size, lightweight).

MIKE @ NST

11-13-2013, 10:11 PM	#1014 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	I would guess around 5-6whp from OEM size. The biggest thing is guys who are supercharged like myself or anyone who doesn't want to slow down anything running such as the power steering pump or water pump. Most of the gains come from the weight savings. NonStopTuning likes this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

11-13-2013, 11:43 PM	#1017 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 41 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Well dang. Honestly I would much rather a set of underdriven pulleys since I already have a still en lightweight crank pulley. So basically I'll be paying $200 for an alternator pulley. I may stay in, let me think about it and if I'm out I'll update my status. Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

11-14-2013, 06:03 AM	#1018 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	Corrected... Below. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction Last edited by SS_Firehawk; 11-14-2013 at 09:42 AM.

11-14-2013, 06:44 AM	#1019 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 41 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Oh sweet, thanks for clearing that up Firehawk! Definitely still in then. Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

11-14-2013, 09:30 AM	#1020 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 16	JUST TO CLARIFY: This group buy is now only for the CR-LITE PULLEY KIT (oem size, lightweight). There is not enough demand at this time to run two separate production runs and offer both pulley kits at the same time, hence the decision to go with this kit, because it is compatible with ALL setups. I really think you guys will be very happy with this kit if we reach the required number to go into production. JUST TO CLARIFY: This group buy is now only for the CR-LITE PULLEY KIT (oem size, lightweight). MIKE @ NST SS_Firehawk likes this. __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

11-13-2013, 04:26 PM	#1007 (permalink)
Zmonster11 Base Member Join Date: Jun 2013 Location: Orlando Posts: 10 Drives: 2014 Nissan 370z M6 Rep Power: 11	So does this mean that there is no more underdrive/overdrive pulley kit option no more for the this group buy, just the OEM light weight pulley kit? or are they both available in this group buy? I personally want the underdrive/overdrive pulley kit with the Belt. I guess I would have to pay regular price?

11-13-2013, 09:23 PM	#1008 (permalink)
nissan_fan Base Member Join Date: Feb 2012 Location: PR Posts: 124 Drives: 2012 370z PW M6 Rep Power: 13	What sort of gain will these light weight pulleys yield? I wanted the under driven set because at some point I want my Z to be my track car.

11-13-2013, 09:40 PM	#1010 (permalink)
nissan_fan Base Member Join Date: Feb 2012 Location: PR Posts: 124 Drives: 2012 370z PW M6 Rep Power: 13	I thought the dyno sheet on page 1 was for the underdriven set.

11-13-2013, 10:01 PM	#1012 (permalink)
nismo13807 Enthusiast Member Join Date: Jan 2013 Location: Illinois Posts: 340 Drives: 2013 Nismo 370z Rep Power: 3367	so whats the pros and cons between the lighter oem pulleys vs the under and over drive pulley? whats the weight difference and power?

11-13-2013, 10:05 PM	#1013 (permalink)
nissan_fan Base Member Join Date: Feb 2012 Location: PR Posts: 124 Drives: 2012 370z PW M6 Rep Power: 13	No problem Chuck. I appreciate you taking the time to reply to my question anyways.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.	RCZ	Intake/Exhaust	270	06-03-2015 02:25 PM
Stillen Underdrive Pulley - Review/Pics/Dyno/Vid	semtex	Engine & Drivetrain	73	11-24-2014 01:25 AM
Stillen Headers installed - Review/Pics/Vid/Dyno	semtex	Intake/Exhaust	120	06-25-2014 12:15 PM
Turbo-kits.com VQ37HR TT kit	nq23	Forced Induction	21	06-07-2009 12:25 PM
JWT Pop Chargers - Pictures - Review - Dyno	RCZ	Intake/Exhaust	31	03-30-2009 09:50 AM