NST (NonStopTuning) 370Z VQ37HR Pulley Kit Review w/ Dyno Charts

brucelidat · 08-17-2013, 08:51 PM

Did anyone post any independent dynos? I've gone through a whole lot of the pages in this thread and haven't seen any. Also, I think I read someone mention improved mpg, anyone have any comments on this? I am losing some MPG with my 4.08 gears and thought the pulleys might be a good way to get some of that back. Any small hp bump would be welcome, but i doubt I would feel it. Will the engine really be much more responsive if I already have the 4.08 gears?

gSwift · 08-19-2013, 01:05 AM

Quote:

Originally Posted by brucelidat

Did anyone post any independent dynos? I've gone through a whole lot of the pages in this thread and haven't seen any. Also, I think I read someone mention improved mpg, anyone have any comments on this? I am losing some MPG with my 4.08 gears and thought the pulleys might be a good way to get some of that back. Any small hp bump would be welcome, but i doubt I would feel it. Will the engine really be much more responsive if I already have the 4.08 gears?

I could be wrong but I don't think the people here that are actually modding our Z's are to concerned with fuel economy. If MPG's are a true concern for you, I'd recommend stop modding the Z for a short period and put that money towards a cheap DD.

brucelidat · 08-19-2013, 01:08 PM

I'm not thatconcerned, but if it helps, that's nice and good to know

NonStopTuning · 08-20-2013, 03:30 PM

Quote:

Originally Posted by brucelidat

Did anyone post any independent dynos? I've gone through a whole lot of the pages in this thread and haven't seen any. Also, I think I read someone mention improved mpg, anyone have any comments on this? I am losing some MPG with my 4.08 gears and thought the pulleys might be a good way to get some of that back. Any small hp bump would be welcome, but i doubt I would feel it. Will the engine really be much more responsive if I already have the 4.08 gears?

There have been independent dynos on several NST kits. They always show an increase in HP and TQ, and improved throttle response. The dyno charts we post are very accurate and legitimate.

You will notice better response and better MPG, with or without your 4.08 gears.

Best of luck!

MIKE @ NST

NonStopTuning · 08-20-2013, 03:32 PM

Here's a little update for the GB members!

Alternator pulleys are off the machines, crank pulleys are in the works. All pulleys will go through the anodizing process after this, and should be ready within the next couple weeks.

NowStayTuned!

MIKE @ NST

axmea? · 08-20-2013, 05:40 PM

^^ Thanks for the update.

Zythaxus · 08-20-2013, 05:52 PM

Craaap I really missed this? Damnit

Sent from my EVO using Tapatalk 2

brucelidat · 08-20-2013, 06:30 PM

i also didn't know about the group buy until just a few days ago.

NickD · 08-21-2013, 09:21 AM

Quote:

Originally Posted by brucelidat

Did anyone post any independent dynos? I've gone through a whole lot of the pages in this thread and haven't seen any. Also, I think I read someone mention improved mpg, anyone have any comments on this? I am losing some MPG with my 4.08 gears and thought the pulleys might be a good way to get some of that back. Any small hp bump would be welcome, but i doubt I would feel it. Will the engine really be much more responsive if I already have the 4.08 gears?

This is my understanding so I hope it helps.

1. Pulleys are not intended to MAKE power but rather free up EXISTING power loss
2. Regardless of 4.08 gears, pulleys free up power through the entire band, not just low end.

All - Feel free to correct me if i'm wrong

Chuck33079 · 08-21-2013, 09:26 AM

Quote:

Originally Posted by NickD

This is my understanding so I hope it helps.

1. Pulleys are not intended to MAKE power but rather free up EXISTING power loss
2. Regardless of 4.08 gears, pulleys free up power through the entire band, not just low end.

All - Feel free to correct me if i'm wrong

Nope, you're spot on. You may feel more of a difference on the low end, since you've got to get the pullies spinning. At higher rpm you may not feel as much of a difference since the pulley is already spinning more quickly. Pullies aren't really as much of a "HP mod" as they are a "throttle response" mod.

Meulen · 08-21-2013, 09:36 AM

there was a group buy? can we still get in?

shipped to 60446?

zilverbullet · 08-21-2013, 09:47 AM

You'd have to PM NST but I think it might be late.

Mannn...where were you all when we were struggling to find 20 buy-ins

Meulen · 08-21-2013, 10:02 AM

Quote:

Originally Posted by zilverbullet

You'd have to PM NST but I think it might be late.

Mannn...where were you all when we were struggling to find 20 buy-ins

probably not on the site yet....just joined and just got my Z!

FPenvy · 08-21-2013, 10:06 AM

group buy? whats the price?

axmea? · 08-21-2013, 10:24 AM

Quote:

Originally Posted by FPenvy

group buy? whats the price?

FPenvy -- 20% off ---- $198 for both choice of colors extra for the belts. You had the snooze button on.....

08-17-2013, 08:51 PM	#796 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	Did anyone post any independent dynos? I've gone through a whole lot of the pages in this thread and haven't seen any. Also, I think I read someone mention improved mpg, anyone have any comments on this? I am losing some MPG with my 4.08 gears and thought the pulleys might be a good way to get some of that back. Any small hp bump would be welcome, but i doubt I would feel it. Will the engine really be much more responsive if I already have the 4.08 gears? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

08-19-2013, 01:08 PM	#798 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	I'm not thatconcerned, but if it helps, that's nice and good to know __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

08-20-2013, 03:32 PM	#800 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 16	Here's a little update for the GB members! Alternator pulleys are off the machines, crank pulleys are in the works. All pulleys will go through the anodizing process after this, and should be ready within the next couple weeks. NowStayTuned! MIKE @ NST gSwift, NickD, Shadezz and 2 others like this. __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

08-20-2013, 05:40 PM	#801 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53241	^^ Thanks for the update. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

08-20-2013, 05:52 PM	#802 (permalink)
Zythaxus Base Member Join Date: Feb 2013 Location: Marietta, GA Posts: 82 Drives: 2010 370z BS 7AT Rep Power: 12	Craaap I really missed this? Damnit Sent from my EVO using Tapatalk 2 __________________ "Vision" 2010 Brilliant silver 370Z Touring/sport Stillen G3 \| Z1 25 Row \| Hotchkis Sways \| Swift Spec R \| 20F/25R

08-20-2013, 06:30 PM	#803 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	i also didn't know about the group buy until just a few days ago. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

08-21-2013, 09:36 AM	#806 (permalink)
Meulen A True Z Fanatic Join Date: Aug 2013 Location: Romeoville, IL Posts: 1,093 Drives: 2010 370z 40th Rep Power: 3389	there was a group buy? can we still get in? shipped to 60446?

08-21-2013, 09:47 AM	#807 (permalink)
zilverbullet Track Member Join Date: Mar 2013 Location: Bay Area, CA Posts: 668 Drives: a silver bullet Rep Power: 15	You'd have to PM NST but I think it might be late. Mannn...where were you all when we were struggling to find 20 buy-ins gSwift and NickD like this. __________________ '13 & Infinity Swifts Z1 Post-MAF F.I. NST *VARIS* Tommy Kaira AeroJacket MotorDyne

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.	RCZ	Intake/Exhaust	270	06-03-2015 02:25 PM
Stillen Underdrive Pulley - Review/Pics/Dyno/Vid	semtex	Engine & Drivetrain	73	11-24-2014 01:25 AM
Stillen Headers installed - Review/Pics/Vid/Dyno	semtex	Intake/Exhaust	120	06-25-2014 12:15 PM
Turbo-kits.com VQ37HR TT kit	nq23	Forced Induction	21	06-07-2009 12:25 PM
JWT Pop Chargers - Pictures - Review - Dyno	RCZ	Intake/Exhaust	31	03-30-2009 09:50 AM