New part in the works.

XPNSD IT · 01-09-2014, 10:12 PM

Looks good! Like the caps too, please make matching set for everything else under the hood! Maybe do an engraved label for each one too. Like a symbol for oil, coolant, brake fluid etc..

AzSpeng · 01-09-2014, 10:15 PM

Already on it

fitment was super nice....I am very pleased with the fitment, Tonight we run the first op on the real deal. they take roughly 30 min each.

Ron · 01-09-2014, 10:31 PM

will the top surface look like that or will it be flat?

AzSpeng · 01-09-2014, 10:39 PM

the top surface will be like this but the recessed area where the sharp edges are, will have a fillet (aka radius) on the inside. then the outside will get a corner rounder that puts an outside fillet.

wont be flat like a piece of sheet metal but will actually look like a cnc machined part. Since the mounting tabs are cnc machined, they will mount perfectly EVERY TIME.

phunk · 01-09-2014, 10:50 PM

nice you went much taller on the billet section than i was figuring. I assumed 3/8" or 1/2" billet and the rest sheet metal

AzSpeng · 01-09-2014, 10:57 PM

NO way man!! I have a sturdy/powerful machine...lets make this bad boy sing!

The gopro screwed up lastnight so no video....I have a program running right now for a part a customer wants. soon as its done ill setup for the big blocks again and take some video for everyone to watch.

Using 1000psi TSC so not sure how much you can see...it will be eventful at least!

mab864 · 01-10-2014, 12:04 AM

That looks awesome. Can't wait. Thanks for putting together the pic I asked for. Even better that it's the car.

AzSpeng · 01-10-2014, 12:07 AM

next few days im going to add it to our website for pre order. We will have 30 available (20 are already spoken for) We wont charge your card until its ready to ship

(this is our policy with every order you place with us in the future, we will never bill your card until the product is ready to ship)

Ron · 01-10-2014, 12:11 AM

Do we know what the price is going to be for this and the other products?

DEpointfive0 · 01-10-2014, 12:14 AM

Quote:

Originally Posted by Ron

Do we know what the price is going to be for this and the other products?

A million dollars!!!

AzSpeng · 01-10-2014, 12:17 AM

100 million dollars!

AzSpeng · 01-10-2014, 12:18 AM

id like to keep this around $410 shipped. really depends on waterjet and welding time which ill know in a few weeks.

we just purchased a brand new waterjet btw!

GaleForce · 01-10-2014, 07:45 AM

If my name is not already on the list, put me down for one of the 30.

EZT · 01-10-2014, 08:27 AM

That's beautiful, gets me real excited for the potential shift knob.

AzSpeng · 01-10-2014, 10:03 AM

Quote:

Originally Posted by GaleForce

If my name is not already on the list, put me down for one of the 30.

Noted! Ill have the link up soon to purchase from our site. (still waiting on authorize.net to finish up the paperwork)

Quote:

Originally Posted by EZT

That's beautiful, gets me real excited for the potential shift knob.

Thanks! We will be doing the shiftknob for the automatics.

01-09-2014, 10:12 PM	#256 (permalink)
XPNSD IT Enthusiast Member Join Date: Oct 2011 Location: San Jose, CA Posts: 298 Drives: 09 370z/16 Hyper STI Rep Power: 13	Looks good! Like the caps too, please make matching set for everything else under the hood! Maybe do an engraved label for each one too. Like a symbol for oil, coolant, brake fluid etc.. __________________ I be getting HIGH just to balance out the LOW

01-09-2014, 10:31 PM	#258 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	will the top surface look like that or will it be flat? __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

01-09-2014, 10:39 PM	#259 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	the top surface will be like this but the recessed area where the sharp edges are, will have a fillet (aka radius) on the inside. then the outside will get a corner rounder that puts an outside fillet. wont be flat like a piece of sheet metal but will actually look like a cnc machined part. Since the mounting tabs are cnc machined, they will mount perfectly EVERY TIME. GaleForce likes this.

01-09-2014, 10:50 PM	#260 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,657 Drives: 370 Rep Power: 947878	nice you went much taller on the billet section than i was figuring. I assumed 3/8" or 1/2" billet and the rest sheet metal __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

01-09-2014, 10:57 PM	#261 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	NO way man!! I have a sturdy/powerful machine...lets make this bad boy sing! The gopro screwed up lastnight so no video....I have a program running right now for a part a customer wants. soon as its done ill setup for the big blocks again and take some video for everyone to watch. Using 1000psi TSC so not sure how much you can see...it will be eventful at least! GaleForce and DEpointfive0 like this.

01-09-2014, 10:15 PM	#257 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	Already on it fitment was super nice....I am very pleased with the fitment, Tonight we run the first op on the real deal. they take roughly 30 min each.

01-10-2014, 12:04 AM	#262 (permalink)
mab864 Enthusiast Member Join Date: Nov 2013 Location: Oregon Posts: 482 Drives: 13 Sport 6MT Rep Power: 11	That looks awesome. Can't wait. Thanks for putting together the pic I asked for. Even better that it's the car. __________________ Berk HFC & CBE, Stillen G3, UpRev & tune by PSI, GTMat, 3M, Swift, StopTech, H&R 20/25, GT-R, 324 whp & 262 torque

01-10-2014, 12:07 AM	#263 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	next few days im going to add it to our website for pre order. We will have 30 available (20 are already spoken for) We wont charge your card until its ready to ship (this is our policy with every order you place with us in the future, we will never bill your card until the product is ready to ship)

01-10-2014, 12:11 AM	#264 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	Do we know what the price is going to be for this and the other products? __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

01-10-2014, 12:17 AM	#266 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	100 million dollars! DEpointfive0 likes this.

01-10-2014, 12:18 AM	#267 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	id like to keep this around $410 shipped. really depends on waterjet and welding time which ill know in a few weeks. we just purchased a brand new waterjet btw! phunk likes this.

01-10-2014, 07:45 AM	#268 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	If my name is not already on the list, put me down for one of the 30. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

01-10-2014, 08:27 AM	#269 (permalink)
EZT Track Member Join Date: Mar 2011 Location: Gainesville Posts: 537 Drives: 09 370z Rep Power: 315	That's beautiful, gets me real excited for the potential shift knob.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Part Out - Part Deux	Wiggins3377	Parts for sale (Private Classifieds)	34	06-07-2013 10:17 AM
[FOR SALE] 350Z HR part out, HUGE PART OUT	DEpointfive0	Parts for sale (Private Classifieds)	1	02-19-2013 01:56 PM
How an LSD works	Red__Zed	Engine & Drivetrain	6	05-23-2012 06:07 PM
[FOR SALE] 98intrigue's pretty large part out: Part 2	98intrigue	Parts for sale (Private Classifieds)	25	04-30-2012 08:20 PM
in the works	It`s Z Time	Northern California Region	6	01-16-2012 08:53 PM