New part in the works.

EZT · 01-03-2014, 06:59 PM

I would eat up a 7 speed shift knob.

AzSpeng · 01-03-2014, 07:11 PM

We will make it happen. Soon as i get these other projects knocked out the 7 speed shift knob will be high on the priority list.

edub370 · 01-04-2014, 11:49 AM

Intake Mani!!!!!!!!!!!!

AzSpeng · 01-04-2014, 11:50 AM

intake manifold is a bit more in depth. We can absolutely do it but we would need to get a list of guys willing to pay the price needed for the part.

AzSpeng · 01-04-2014, 01:31 PM

I dont like to re-invent the wheel usually but I see a small void that can be filled.

Can you guess what its for? Price range will be around the $50-60 mark

Untitled.jpg

Megan370z · 01-04-2014, 01:37 PM

Quote:

Originally Posted by AzSpeng

I dont like to re-invent the wheel usually but I see a small void that can be filled.

Can you guess what its for? Price range will be around the $50-60 mark

Attachment 82083

plate holder..

what do I win ?

AzSpeng · 01-04-2014, 01:38 PM

Quote:

Originally Posted by Megan370z

plate holder..

what do I win ?

I'll buy you a beer

come on down to the shop.

DEpointfive0 · 01-04-2014, 01:51 PM

Quote:

Originally Posted by AzSpeng

I dont like to re-invent the wheel usually but I see a small void that can be filled.

Can you guess what its for? Price range will be around the $50-60 mark

Attachment 82083

I want the mounting hole to be in the extreme right bottom corner when looking at it

zefaulter · 01-04-2014, 01:57 PM

Quote:

Originally Posted by AzSpeng

I dont like to re-invent the wheel usually but I see a small void that can be filled.

Can you guess what its for? Price range will be around the $50-60 mark

Attachment 82083

Can we see a mockup or a photoshop image?

AzSpeng · 01-04-2014, 02:08 PM

as soon as i get some other projects cleared up ill have a working prototype.

roplusbee · 01-06-2014, 03:37 AM

Wow..........these guys are not fooling around. I expected some Tom-Foolery when the teaser came out. Great work so far! And a mass of feedback..........WoW!

AzSpeng · 01-07-2014, 11:31 AM

Not related to the 370z but fairly neat I think. Wishbone suspension component for a Yamaha R1 race bike.

phunk · 01-07-2014, 12:11 PM

Beautiful. Do you make your own vise jaw blanks or order them?

AzSpeng · 01-07-2014, 12:37 PM

I make my own. I feel its a waste of money to purchase them...despite what ANYONE will tell you. if you have even an hour of free time on the machine you might as well make some jaws.

AzSpeng · 01-07-2014, 12:40 PM

Vise jaws dont have to be precise by any means... I have a locating slot on the back and the face that locates against the vise face and vise way are perpendicular. aside from that i run them as fast as possible and dont care about taper or any other "issues"

I have a video cutting the vise jaws.

Okuma Genos M560-V Cnc mill & Gibbscam with Volumill - YouTube

01-03-2014, 06:59 PM	#181 (permalink)
EZT Track Member Join Date: Mar 2011 Location: Gainesville Posts: 539 Drives: 09 370z Rep Power: 315	I would eat up a 7 speed shift knob. XwChriswX likes this.

01-03-2014, 07:11 PM	#182 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	We will make it happen. Soon as i get these other projects knocked out the 7 speed shift knob will be high on the priority list. XwChriswX likes this.

01-04-2014, 11:49 AM	#183 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	Intake Mani!!!!!!!!!!!! __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

01-04-2014, 11:50 AM	#184 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	intake manifold is a bit more in depth. We can absolutely do it but we would need to get a list of guys willing to pay the price needed for the part. DEpointfive0 likes this.

01-04-2014, 01:31 PM	#185 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	I dont like to re-invent the wheel usually but I see a small void that can be filled. Can you guess what its for? Price range will be around the $50-60 mark Untitled.jpg phunk likes this.

01-04-2014, 02:08 PM	#190 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	as soon as i get some other projects cleared up ill have a working prototype.

01-06-2014, 03:37 AM	#191 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	Wow..........these guys are not fooling around. I expected some Tom-Foolery when the teaser came out. Great work so far! And a mass of feedback..........WoW! DEpointfive0 likes this. __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

01-07-2014, 11:31 AM	#192 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	Not related to the 370z but fairly neat I think. Wishbone suspension component for a Yamaha R1 race bike. phunk likes this. Last edited by AzSpeng; 01-07-2014 at 11:33 AM.

01-07-2014, 12:11 PM	#193 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,657 Drives: 370 Rep Power: 951234	Beautiful. Do you make your own vise jaw blanks or order them? __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

01-07-2014, 12:37 PM	#194 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	I make my own. I feel its a waste of money to purchase them...despite what ANYONE will tell you. if you have even an hour of free time on the machine you might as well make some jaws. phunk likes this.

01-07-2014, 12:40 PM	#195 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 11	Vise jaws dont have to be precise by any means... I have a locating slot on the back and the face that locates against the vise face and vise way are perpendicular. aside from that i run them as fast as possible and dont care about taper or any other "issues" I have a video cutting the vise jaws. Okuma Genos M560-V Cnc mill & Gibbscam with Volumill - YouTube phunk likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Part Out - Part Deux	Wiggins3377	Parts for sale (Private Classifieds)	34	06-07-2013 10:17 AM
[FOR SALE] 350Z HR part out, HUGE PART OUT	DEpointfive0	Parts for sale (Private Classifieds)	1	02-19-2013 01:56 PM
How an LSD works	Red__Zed	Engine & Drivetrain	6	05-23-2012 06:07 PM
[FOR SALE] 98intrigue's pretty large part out: Part 2	98intrigue	Parts for sale (Private Classifieds)	25	04-30-2012 08:20 PM
in the works	It`s Z Time	Northern California Region	6	01-16-2012 08:53 PM