New part in the works.

GaleForce · 12-18-2013, 10:44 PM

No Z logo for me. I would prefer no logos at all, but I can understand wanting your company logo on it somewhere.

Question, is it possible to have a small window for a quick visual check of fluid level? Might be more work than its worth...

Chuck33079 · 12-18-2013, 10:46 PM

Quote:

Originally Posted by GaleForce

Question, is it possible to have a small window for a quick visual check of fluid level? Might be more work than its worth...

Probably easier to put a sight tube on the side.

Satin black, no logos please. And two matching baffled catch cans with -10 inlets and outlets, and a drain fitting on the bottom.

GaleForce · 12-19-2013, 07:47 AM

Quote:

Originally Posted by Chuck33079

Probably easier to put a sight tube on the side.

Satin black, no logos please. And two matching baffled catch cans with -10 inlets and outlets, and a drain fitting on the bottom.

AzSpeng · 12-18-2013, 10:58 PM

Quote:

Originally Posted by GaleForce

Question, is it possible to have a small window for a quick visual check of fluid level? Might be more work than its worth...

Might be able to. I just need to source out a "seal" to hold a piece of glass in place or figure something out that we can make in house.

AzSpeng · 12-18-2013, 10:57 PM

We will do something with no super visible logos, everything we do will be subtle, tasteful, and with class. If there is a logo to be put, you wont notice it easily or at all when its installed in the car.

Huck · 12-18-2013, 11:38 PM

So I'm retarded... is this going to be a cover that goes over the reservoir tank? Or a whole new tank?

Zdayz 2014!!

AzSpeng · 12-18-2013, 11:44 PM

whole new tank. thats just the top portion that will be cnc milled with a cap. the rest of the tank has yet to be designed. Ill finish up the rest tomorrow.

Huck · 12-18-2013, 11:48 PM

Sweet, looks good so far man! Now if you could just make the custom hood I've been wanting in full CF I'd be happy lol.

Zdayz 2014!!

AzSpeng · 12-18-2013, 11:56 PM

Quote:

Originally Posted by GaleForce

No Z logo for me. I would prefer no logos at all, but I can understand wanting your company logo on it somewhere.

Question, is it possible to have a small window for a quick visual check of fluid level? Might be more work than its worth...

Quote:

Originally Posted by Huck

Sweet, looks good so far man! Now if you could just make the custom hood I've been wanting in full CF I'd be happy lol.

Zdayz 2014!!

cf is a pain in the *** to work with! ITCHY WORK!

karotZ · 12-19-2013, 01:27 AM

Sh*t... the spending on the Z doesn't stop...

AzSpeng · 12-19-2013, 01:37 AM

Lets get a list going of who all is in with this coolant tank. I'm buying materials tomorrow morning, 500+lbs of aluminum

AzSpeng · 12-19-2013, 02:22 AM

Off to bed.

enjoy! Ill finish the bottom tomorrow or sometime early next week. Gotta get this programmed and order material tomorrow morning.

mab864 · 12-19-2013, 07:21 AM

I'm in as long as it's pressurized.

GaleForce · 12-19-2013, 07:52 AM

Order list,

GaleForce
...

AzSpeng · 12-19-2013, 09:17 AM

sight tubes are by far one of the ugliest things possible to put in your engine bay...if you want one ill add it but im going to charge extra not for the labor but for the eyesore.

opening the lid and peeking in is part of regular maintenance. Do you have a sight tube for your oil in your engine? Transmission fluid/gear oil? Blinker fluid?

Now if I can come up with a way to have a "sight" window on the tank not a piece of tubing hanging off the side then I'm all for it!

On the note of being pressurized, I have been giving this a TON of thoughts from an engineering standpoint and I do not see any reason at all why this is even necessary. There are no known issues with a "normally non pressurized" coolant overflow reservoir.

12-18-2013, 10:44 PM	#1 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51866	No Z logo for me. I would prefer no logos at all, but I can understand wanting your company logo on it somewhere. Question, is it possible to have a small window for a quick visual check of fluid level? Might be more work than its worth... __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

12-18-2013, 10:57 PM	#5 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 13	We will do something with no super visible logos, everything we do will be subtle, tasteful, and with class. If there is a logo to be put, you wont notice it easily or at all when its installed in the car. GaleForce and equalme like this.

12-18-2013, 11:38 PM	#6 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 43 Posts: 5,075 Drives: Pantydropper machine Rep Power: 35	So I'm retarded... is this going to be a cover that goes over the reservoir tank? Or a whole new tank? Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-18-2013, 11:48 PM	#8 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 43 Posts: 5,075 Drives: Pantydropper machine Rep Power: 35	Sweet, looks good so far man! Now if you could just make the custom hood I've been wanting in full CF I'd be happy lol. Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-19-2013, 01:27 AM	#10 (permalink)
karotZ Track Member Join Date: Dec 2010 Location: not found Posts: 723 Drives: on empty tank of gas Rep Power: 17	Sh*t... the spending on the Z doesn't stop... Z Stig and LMBmikeZ like this. __________________ VERTEX \| SUIVAX \| AMUSE \| SSR \| SPARCO \| STILLEN \| FAST INTENTIONS x HKS \| HANKOOK \| NARDI \| NRG \| EVO-R \| ROBISPEC \| SPC

12-18-2013, 11:44 PM	#7 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 13	whole new tank. thats just the top portion that will be cnc milled with a cap. the rest of the tank has yet to be designed. Ill finish up the rest tomorrow.

12-19-2013, 01:37 AM	#11 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 13	Lets get a list going of who all is in with this coolant tank. I'm buying materials tomorrow morning, 500+lbs of aluminum

12-19-2013, 02:22 AM	#12 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 13	Off to bed. enjoy! Ill finish the bottom tomorrow or sometime early next week. Gotta get this programmed and order material tomorrow morning.

12-19-2013, 07:21 AM	#13 (permalink)
mab864 Enthusiast Member Join Date: Nov 2013 Location: Oregon Posts: 482 Drives: 13 Sport 6MT Rep Power: 13	I'm in as long as it's pressurized. __________________ Berk HFC & CBE, Stillen G3, UpRev & tune by PSI, GTMat, 3M, Swift, StopTech, H&R 20/25, GT-R, 324 whp & 262 torque Last edited by mab864; 12-19-2013 at 07:25 AM.

12-19-2013, 07:52 AM	#14 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51866	Order list, GaleForce ... __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

12-19-2013, 09:17 AM	#15 (permalink)
AzSpeng Enthusiast Member Join Date: Nov 2013 Location: Chandler, Az Posts: 345 Drives: Skyline GTR Rep Power: 13	sight tubes are by far one of the ugliest things possible to put in your engine bay...if you want one ill add it but im going to charge extra not for the labor but for the eyesore. opening the lid and peeking in is part of regular maintenance. Do you have a sight tube for your oil in your engine? Transmission fluid/gear oil? Blinker fluid? Now if I can come up with a way to have a "sight" window on the tank not a piece of tubing hanging off the side then I'm all for it! On the note of being pressurized, I have been giving this a TON of thoughts from an engineering standpoint and I do not see any reason at all why this is even necessary. There are no known issues with a "normally non pressurized" coolant overflow reservoir.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Part Out - Part Deux	Wiggins3377	Parts for sale (Private Classifieds)	34	06-07-2013 10:17 AM
[FOR SALE] 350Z HR part out, HUGE PART OUT	DEpointfive0	Parts for sale (Private Classifieds)	1	02-19-2013 01:56 PM
How an LSD works	Red__Zed	Engine & Drivetrain	6	05-23-2012 06:07 PM
[FOR SALE] 98intrigue's pretty large part out: Part 2	98intrigue	Parts for sale (Private Classifieds)	25	04-30-2012 08:20 PM
in the works	It`s Z Time	Northern California Region	6	01-16-2012 08:53 PM