Service engine, vdc, slip, power loss...

1slow370 · 11-19-2013, 07:49 PM

I know whats wrong with it probably. I had the same issue and 3 times of the dealer replacing the cam sprockets later they found what it was. There are several screen filters in the engine that are probably pluged with debris so the cam timing isn't responding as it should and the ecu is throwing a position error because of it. You most likely have a lunched bearing.

Perfikt · 11-21-2013, 02:15 PM

FINALLY got the car back about a hour ago. its running great.

apparently some time in the cars life, the belt shredded, wrapped around the crank/crank pulley, and worked itself through the front main seal, and into the oil pan. whoever fixed it, never pulled the oil pan, just the front cover. so there was alot of belt shreds in the oil pickup tube. So i have a new oil tube now.

after fixing the oil feeding issue, timing was still off, they replaced the cam phaser/sprocket, problem solved...

DEpointfive0 · 11-21-2013, 04:10 PM

Sounds a bit bullshít to me, but I'll let it slide since the car is running

1slow370 · 11-21-2013, 04:49 PM

if it happens again you're in for a full teardown to replace whats broken and change the screen filters and clean out the oil gallery.

bombdefuzer · 11-22-2013, 02:26 AM

Quote:

Originally Posted by DEpointfive0

Sounds a bit bullshít to me, but I'll let it slide since the car is running

Chuck33079 · 11-22-2013, 06:42 AM

Quote:

Originally Posted by DEpointfive0

Sounds a bit bullshít to me, but I'll let it slide since the car is running

OP, next time you change the oil send it out to Blackstone Labs and see what kind of shape that motor is in internally.

Mandingo · 11-22-2013, 11:02 AM

Quote:

Originally Posted by Perfikt

FINALLY got the car back about a hour ago. its running great.

apparently some time in the cars life, the belt shredded, wrapped around the crank/crank pulley, and worked itself through the front main seal, and into the oil pan. whoever fixed it, never pulled the oil pan, just the front cover. so there was alot of belt shreds in the oil pickup tube. So i have a new oil tube now.

after fixing the oil feeding issue, timing was still off, they replaced the cam phaser/sprocket, problem solved...

That doesn't make sense to me physically. I've heard of belt shreds working through the main seal, but they would be very small and wouldn't be stopped until they hit the oil filter right? The oil pickup tube is relatively large. Anyways, I really hope they aren't d*cking you around.

1slow370 · 11-22-2013, 02:02 PM

there is a screen in the pickup tube, better yet if oil flow to the engine was restricted so much that the cam timing was thrown off how much was going to the bearings, sorry dude but I think you might want to flip that car if you have no warranty, that or be prepared to buy a new motor for it.

DEpointfive0 · 11-22-2013, 03:25 PM

Quote:

Originally Posted by 1slow370

there is a screen in the pickup tube, better yet if oil flow to the engine was restricted so much that the cam timing was thrown off how much was going to the bearings, sorry dude but I think you might want to flip that car if you have no warranty, that or be prepared to buy a new motor for it.

I agree. Sell it get another... Sorry...

NS370Z · 11-22-2013, 04:52 PM

Just joking.

This is why I prefer to buy new.

11-19-2013, 07:49 PM	#46 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	I know whats wrong with it probably. I had the same issue and 3 times of the dealer replacing the cam sprockets later they found what it was. There are several screen filters in the engine that are probably pluged with debris so the cam timing isn't responding as it should and the ecu is throwing a position error because of it. You most likely have a lunched bearing. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

11-21-2013, 04:10 PM	#48 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Sounds a bit bullshít to me, but I'll let it slide since the car is running __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

11-21-2013, 04:49 PM	#49 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	if it happens again you're in for a full teardown to replace whats broken and change the screen filters and clean out the oil gallery. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

11-22-2013, 02:02 PM	#53 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	there is a screen in the pickup tube, better yet if oil flow to the engine was restricted so much that the cam timing was thrown off how much was going to the bearings, sorry dude but I think you might want to flip that car if you have no warranty, that or be prepared to buy a new motor for it. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decreased power loss of power	simota1	Engine & Drivetrain	96	10-28-2019 07:10 PM
Sudden power loss	Yutnaka	Engine & Drivetrain	72	05-28-2015 11:15 AM
Power loss	whoLEEoh	Intake/Exhaust	31	04-16-2012 08:44 PM
Boost controller loss of power!!!	LafitteZ	Forced Induction	3	10-13-2011 08:46 PM
Power Loss after HKS Exhaust.	whoLEEoh	Intake/Exhaust	7	10-05-2011 04:45 PM

11-21-2013, 02:15 PM	#47 (permalink)
Perfikt Base Member Join Date: Oct 2013 Location: Nederland, Tx Posts: 46 Drives: 2010 370Z Rep Power: 11	FINALLY got the car back about a hour ago. its running great. apparently some time in the cars life, the belt shredded, wrapped around the crank/crank pulley, and worked itself through the front main seal, and into the oil pan. whoever fixed it, never pulled the oil pan, just the front cover. so there was alot of belt shreds in the oil pickup tube. So i have a new oil tube now. after fixing the oil feeding issue, timing was still off, they replaced the cam phaser/sprocket, problem solved...