Tips/Tricks to bleed the CSC?

Mitco39

Got it to bleed, but not in the way you would think. I pulled apart the master cylinder and took a dremel to the plunger where the rod sits in. I shaved it down a bit so that the piston would come back a little further and thus allow the fluid to flow between the reservoir and rest of the system. Once I did this and reassembled it the fluid started flowing through it and I was both able to gravity bleed and suck the air out with my vac pump. Not sure if I just had a shitty master cylinder or what. But shes back in the car and I got full pedal with no dead spots. Might order another MC just in case.

Thanks for the help!

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html