NA: 342/275. Anyone higher?

theDreamer · 11-06-2012, 01:04 PM

Quote:

Originally Posted by Mike

probably not. the only possibility is exhaust cams, maybe in a year. They would be close to 3000 installed though, with at least 20 hours of labor.

Daaaamn. Plus if you put in the exhaust cams you may want to do high compression pistons and other upgrades since you are tearing the engine down so much. I am really curious if the engine can reach the possible 400whp mark N/A, I know years ago it was discussed in length on the forum if possible.

Mike · 11-06-2012, 01:11 PM

Quote:

Originally Posted by theDreamer

Daaaamn. Plus if you put in the exhaust cams you may want to do high compression pistons and other upgrades since you are tearing the engine down so much. I am really curious if the engine can reach the possible 400whp mark N/A, I know years ago it was discussed in length on the forum if possible.

And at that point, I'm probably just better off doing an LS swap, which is my ultimate plan if this engine ever blows.

daisuke149 · 11-06-2012, 01:15 PM

Quote:

Originally Posted by Mike

And at that point, I'm probably just better off doing an LS swap, which is my ultimate plan if this engine ever blows.

MTI has a 700hp LS crate motor...

babbagandu · 11-08-2012, 10:34 AM

I thought I read in a post here yesterday that z1 is making a version of these for the 370z. I can't find it now for some reason

Z1, is that right? If yes then when will they be available?

theDreamer · 11-08-2012, 11:43 AM

Quote:

Originally Posted by Mike

And at that point, I'm probably just better off doing an LS swap, which is my ultimate plan if this engine ever blows.

LS7....

phunk · 11-08-2012, 12:04 PM

Just over 500hp on an engine dyno has been made by a DE engine, so 400whp should certainly be obtainable by a VHR. RPM is the ticket... The DE has to have a dry sump to spin that high, as the oil pump is a time bomb over 7000 track, 7500 street. If the VHR oil pump can handle 9000rpm (which is hard to chew... not many factory pumps can), and if the VVEL can handle that, I think it could see 400whp with a pretty basic build.

I mean... mike's dyno graph there is peaking at 7200.... thats pretty damn low to be making so much HP/L. There is clearly so much more to be made as the community takes more steps. It might take a while before someone gets to 400, but I think it will happen.

SPOHN · 11-08-2012, 01:37 PM

^ that would be very nice accomplishment. Something I wouldn't mind trying one day. But it's hard to make such a jump when it's not guarrented on a built NA motor. But I really feel it could be done with bored and stroked motor end cams. Course there's always the cooling issue we have at hand. Or at least with tracked cars.

NitrousZ34 · 11-12-2012, 10:05 PM

Would these headers work on the Boosted Performance turbo kit?

Boost_lee · 11-12-2012, 10:10 PM

Quote:

Originally Posted by NitrousZ34

Would these headers work on the Boosted Performance turbo kit?

I don't believe so, since you cannot use VQ37 cats/TP's with these headers.

NitrousZ34 · 11-12-2012, 10:44 PM

Quote:

Originally Posted by Boost_lee

I don't believe so, since you cannot use VQ37 cats/TP's with these headers.

Yeah thats what i was thinking... Maybe they will work if Z1 makes some specifically for the VQ37. Those header welds along with Sasha's Turbo Kit welds....

SPOHN · 11-13-2012, 05:56 AM

Mike I'm going to beat you by .5hp. Hehe

b1adesofcha0s · 11-13-2012, 08:05 AM

Quote:

Originally Posted by SPOHN

Mike I'm going to beat you by .5hp. Hehe

Trollolololol

edub370 · 11-13-2012, 08:42 AM

im just saying, with those jun cams, new valve springs/retainers, & head work we are looking at a possible 360whp na

John@Z1 · 11-13-2012, 09:04 AM

Quote:

Originally Posted by NitrousZ34

Would these headers work on the Boosted Performance turbo kit?

Do you have a pic from underneath the car?

SPOHN · 11-13-2012, 09:11 AM

Quote:

Originally Posted by edub370

im just saying, with those jun cams, new valve springs/retainers, & head work we are looking at a possible 360whp na

Id like to see ITB on our car.

11-08-2012, 12:04 PM	#141 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,655 Drives: 370 Rep Power: 944523	Just over 500hp on an engine dyno has been made by a DE engine, so 400whp should certainly be obtainable by a VHR. RPM is the ticket... The DE has to have a dry sump to spin that high, as the oil pump is a time bomb over 7000 track, 7500 street. If the VHR oil pump can handle 9000rpm (which is hard to chew... not many factory pumps can), and if the VVEL can handle that, I think it could see 400whp with a pretty basic build. I mean... mike's dyno graph there is peaking at 7200.... thats pretty damn low to be making so much HP/L. There is clearly so much more to be made as the community takes more steps. It might take a while before someone gets to 400, but I think it will happen. 370ZNISMO#704 likes this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph Last edited by phunk; 11-08-2012 at 12:08 PM.

11-08-2012, 01:37 PM	#142 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	^ that would be very nice accomplishment. Something I wouldn't mind trying one day. But it's hard to make such a jump when it's not guarrented on a built NA motor. But I really feel it could be done with bored and stroked motor end cams. Course there's always the cooling issue we have at hand. Or at least with tracked cars. __________________

11-13-2012, 05:56 AM	#146 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Mike I'm going to beat you by .5hp. Hehe __________________

11-13-2012, 08:42 AM	#148 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 19	im just saying, with those jun cams, new valve springs/retainers, & head work we are looking at a possible 360whp na __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Exhaust higher oil pressure gauge????	jlbrenne	Engine & Drivetrain	10	08-26-2012 09:23 PM
catback exhaust and higher oil temp	wasti	Intake/Exhaust	23	06-27-2011 04:32 PM
Higher Oil Temp after oil Change???	BLM	Nissan 370Z General Discussions	27	04-05-2011 07:47 PM
Higher gear ratios	Zeto	Engine & Drivetrain	8	07-09-2010 08:37 AM
Any 370s running higher than 20psi?	GoDZiLLa_845	Forced Induction	68	04-16-2010 11:31 PM

11-08-2012, 10:34 AM	#139 (permalink)
babbagandu Enthusiast Member Join Date: Mar 2011 Location: US Posts: 349 Drives: 09 Nismo Rep Power: 14	I thought I read in a post here yesterday that z1 is making a version of these for the 370z. I can't find it now for some reason Z1, is that right? If yes then when will they be available?

11-12-2012, 10:05 PM	#143 (permalink)
NitrousZ34 Banned Join Date: Apr 2012 Location: Canoga Posts: 505 Drives: Myself crazy Rep Power: 0	Would these headers work on the Boosted Performance turbo kit?