Cant rev pass 3500 rpm HELP

kenny's 370z · 10-24-2012, 08:26 PM

i unplugged my map sensor today to experiment because i was still having periodic bogging and the car runs like it should.i believe the map sensor has been my culprit all along even though no cels were thrown before i unplugged it.definitely look at the map.

Meowzah123 · 10-24-2012, 09:24 PM

First post

not a proper intro, but will post one later. Just installed the stillen gen3, and on my test drive same thing happened to me. Took it home and tore it apart. Turned out that a slice of rubber came off the driver side K&N filter and got wedged in the throttle body! Was not a happy camper. The 3 hour job turned into a very swear filled 6!

DIGItonium · 10-25-2012, 07:56 AM

Sounds like intermittent CAS failure?

tru_Asiatik · 10-25-2012, 08:31 PM

Ok i think i was able to duplicate the incident
For a while now i hear this grinding noise when i take a long sharp circular turn while stepping on the gas(it disappers when i let go)
At first i was thinking wheel bearings so i didnt pay much attention to it
So today i took the turn while accelerating and if course i can hear the frinding noise
And as soon as i exited the curve and try to accelerate the car bogs at 3500 rpm and wont let me accelerate further
Now im worried.. Can anyone shed some light?

tru_Asiatik · 10-26-2012, 08:48 AM

Found this post reply #19 is the exact same situation i have
http://www.the370z.com/nissan-370z-g...mp-mode-2.html

juld0zer · 06-14-2014, 01:03 AM

did you end up resolving the problem?

10-25-2012, 07:56 AM	#18 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Sounds like intermittent CAS failure? __________________

10-25-2012, 08:31 PM	#19 (permalink)
tru_Asiatik Track Member Join Date: Feb 2009 Location: so cal Posts: 793 Drives: 2009 370Z 6MT Rep Power: 270	Ok i think i was able to duplicate the incident For a while now i hear this grinding noise when i take a long sharp circular turn while stepping on the gas(it disappers when i let go) At first i was thinking wheel bearings so i didnt pay much attention to it So today i took the turn while accelerating and if course i can hear the frinding noise And as soon as i exited the curve and try to accelerate the car bogs at 3500 rpm and wont let me accelerate further Now im worried.. Can anyone shed some light? __________________ Stillen G3 CAIStillen CBEBerk's HFCEibach ProkitHotchkis Swaysichiba 15/20mm spacers? Oil coolerStillen PulleyStillen Headers

10-26-2012, 08:48 AM	#20 (permalink)
tru_Asiatik Track Member Join Date: Feb 2009 Location: so cal Posts: 793 Drives: 2009 370Z 6MT Rep Power: 270	Found this post reply #19 is the exact same situation i have http://www.the370z.com/nissan-370z-g...mp-mode-2.html __________________ Stillen G3 CAIStillen CBEBerk's HFCEibach ProkitHotchkis Swaysichiba 15/20mm spacers? Oil coolerStillen PulleyStillen Headers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Recommendations for $3500 daily driver	babbagandu	Other Vehicles	9	08-23-2012 11:00 PM
370Z For Sale 2009 370Z Nismo #495, 3500 Miles, Magnetic Black	ODEHBOY	370Z For Sale	15	10-25-2011 09:35 PM
Nismo LMGT4 (18X9/10)+18+15 (5X114.3) $3500 shipped	R390	Parts for sale (Private Classifieds)	2	03-09-2011 08:52 PM
$3500 Behind Invoice on all 2010 Roadsters!!	FuszNissan	Nissan 370Z Roadster (Convertible)	18	11-21-2010 02:09 PM

10-24-2012, 08:26 PM	#16 (permalink)
kenny's 370z Base Member Join Date: Jun 2012 Location: TN Age: 58 Posts: 243 Drives: 2012 frontier sv v6 Rep Power: 12	i unplugged my map sensor today to experiment because i was still having periodic bogging and the car runs like it should.i believe the map sensor has been my culprit all along even though no cels were thrown before i unplugged it.definitely look at the map.

10-24-2012, 09:24 PM	#17 (permalink)
Meowzah123 Base Member Join Date: Sep 2012 Location: Florida Posts: 5 Drives: 09 370 sport touring Rep Power: 12	First post not a proper intro, but will post one later. Just installed the stillen gen3, and on my test drive same thing happened to me. Took it home and tore it apart. Turned out that a slice of rubber came off the driver side K&N filter and got wedged in the throttle body! Was not a happy camper. The 3 hour job turned into a very swear filled 6!

06-14-2014, 01:03 AM	#21 (permalink)
juld0zer Enthusiast Member Join Date: Nov 2012 Location: Sydney Posts: 428 Drives: 11 Nissan 370Z MB M6 Rep Power: 138	did you end up resolving the problem?