RPM cut at 2500??? What's wrong with this??

sinigami24 · 05-08-2010, 05:37 PM

Ok. I have 6M 370z. I was driving down the road and all of a sudden, my car just cut the RPM at 2500.

I couldn't take my car past 2500 rpms about 5 mins. Fortunately, it came back to normal now and running very well...
Would anyone know what is possibly wrong??

Trips · 05-08-2010, 05:40 PM

Was it hot by any chance? It Could've gone into limp mode?

1slow370 · 05-08-2010, 05:52 PM

my car did this once as well it was throwing cawshaft position sensor over adv. errors like like crazy for both sides, shut the car off for ten turned it back on and no problems since my guess is the ecu may be a little too overprotective or there was some kind of interference and it just took a while for it to figure it all out that it was safe again.

Well my RPM cut came back wouldn't go over 3600 and tada both my cam position sensors are faulty. i only have resistance across 2 of the three pins in each sensor and the manual says there should be resistance across any combination of pins

anybody want to take bets on whether they void my warranty or not?

juld0zer · 06-13-2014, 08:17 PM

hello 1slow370, sorry to revive this thread but your problem sounds like mine. Except mine isnt throwing any codes

What did Nissan do in the end?
Could you downshift from 4th to 2nd and force the revs up that way? If so, were you able to wring it to redline (before you ran out of road because it would take an eternity)?

05-08-2010, 05:37 PM	#1 (permalink)
sinigami24 Base Member Join Date: May 2010 Location: Nothern Virginia Posts: 4 Drives: 10 Nissan 370z PW M6 Rep Power: 14	RPM cut at 2500??? What's wrong with this?? Ok. I have 6M 370z. I was driving down the road and all of a sudden, my car just cut the RPM at 2500. I couldn't take my car past 2500 rpms about 5 mins. Fortunately, it came back to normal now and running very well... Would anyone know what is possibly wrong??

05-08-2010, 05:40 PM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	Was it hot by any chance? It Could've gone into limp mode? __________________

05-08-2010, 05:52 PM	#3 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	my car did this once as well it was throwing cawshaft position sensor over adv. errors like like crazy for both sides, shut the car off for ten turned it back on and no problems since my guess is the ecu may be a little too overprotective or there was some kind of interference and it just took a while for it to figure it all out that it was safe again. Well my RPM cut came back wouldn't go over 3600 and tada both my cam position sensors are faulty. i only have resistance across 2 of the three pins in each sensor and the manual says there should be resistance across any combination of pins anybody want to take bets on whether they void my warranty or not? __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 05-09-2010 at 06:35 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Most bizarre thing happen to me today! Unable to Rev past 2500 RPM!	AK370Z	Nissan 370Z General Discussions	84	04-13-2012 07:46 PM
FS:WORK VSKF Chrome 20x9+20x10 $2500	VIP-STATUS	Parts for sale (Private Classifieds)	0	04-30-2010 06:57 PM
370z nismo full exhaust, as new, 2500 miles, $850 shipped	400hpmarauder	Parts for sale (Private Classifieds)	17	03-08-2010 06:25 PM
What's wrong with the 6MT?	WooZ	Nissan 370Z General Discussions	40	08-29-2009 07:01 PM
Is it so wrong...	FricFrac	The Lounge (Off Topic)	4	06-03-2009 11:25 AM

06-13-2014, 08:17 PM	#4 (permalink)
juld0zer Enthusiast Member Join Date: Nov 2012 Location: Sydney Posts: 428 Drives: 11 Nissan 370Z MB M6 Rep Power: 138	hello 1slow370, sorry to revive this thread but your problem sounds like mine. Except mine isnt throwing any codes What did Nissan do in the end? Could you downshift from 4th to 2nd and force the revs up that way? If so, were you able to wring it to redline (before you ran out of road because it would take an eternity)?