|
The tech is slightly wrong here. Most likely to set the gears up right he will have to change shims side to side and he will also need a new
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
09-21-2012, 09:04 AM
|
#6 (permalink) |
|
Base Member
Join Date: Oct 2010
Location: J.P., LA
Posts: 47
Drives: 2009 Nismo 370Z
Rep Power: 15  |
The tech is slightly wrong here. Most likely to set the gears up right he will have to change shims side to side and he will also need a new crush sleeve for the pinion. He should reuse the pinion shim after pressing the pinion bearing off. If he does not reuse to old pinion bearing then you will need new pinion shims and he will have to set the pinion depth, which I wouldn't trust most techs to do correctly. Best bet is to reuse the old pinion shim and bearing.
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| HFC install | g96818 | Hawaii | 30 | 08-11-2013 10:39 AM |
| Bbk install help | zuperman 370 | Brakes & Suspension | 0 | 08-11-2012 03:08 PM |
| Install day? | nynhex | Texas | 9 | 05-26-2011 02:41 PM |
| my install so far | samb03 | Audio & Video | 2 | 03-28-2011 03:44 PM |
| Help with My Install | LinPark | Audio & Video | 15 | 08-08-2010 08:28 AM |
Threaded Mode
