08-29-2012, 01:09 PM
|
#9 (permalink)
|
|
A True Z Fanatic
Join Date: Oct 2010
Location: NA
Posts: 1,732
Drives: NA
Rep Power: 23
|
Quote:
Originally Posted by Megan370z
there isnt any tape on it. its just sealed with a rubber O-ring.
I disasembled mine last winter because I wanted to smooth the edge for better flowing .
and that oil you got there might be a very tiny leak or just the residual oil from the last time you did the oil change ...
contact the company or just tight the screw a few degree ... its already torqued good to begin with.
|
thanks, this is exactly the info i was looking for. although, it cant be residual oil from my last oil change! i emptied the pan to install the cooler and tightened everything to spec. at a 1000 miles...there was a small dried up puddle of oil on the undertray, and this is the only place i found that had some oil on it. ill go ahead and try tightening the screw a smidge to see if it helps
if i do take it out though, how hard is it to get the spring and screw back in?
|
|
|
Similar Threads
Threaded Mode
