Under Drive Pulleys...?

DEpointfive0 · 10-20-2012, 12:52 AM

I have the Stillen pulley because I WANTED 20% under driven... Mike at NST will make you one if you NEED NST... But in all honesty if you or your installer is component, there is no risk in running it... I've had it for 3000 miles now, and it feels great, I MIGHT down the line order a 10% overdrive for the alternator from Mike@NST, but as of now I don't see any reason

DEpointfive0 · 10-20-2012, 01:02 AM

It took my mechanic 20 min to work out where the belts go (as I didn't have the diagram for it) then he put a breaker bar with I think 3/8" on the tensioner, moved that out of the way then took the belt off... Then he had this bitching contraption to put over the stock pulley with a torn belt over the stock pulley (to prevent damage) then he used a breaker ba on the bolt and once he undid it the pulley slid right off... Car had like 23k miles on it and was 3 years old at the time... And honestly I have no damn idea why the notches are on the pulley for alignment... I can only see it being necessary if you're rebuilding the motor

10-20-2012, 12:52 AM	#31 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	I have the Stillen pulley because I WANTED 20% under driven... Mike at NST will make you one if you NEED NST... But in all honesty if you or your installer is component, there is no risk in running it... I've had it for 3000 miles now, and it feels great, I MIGHT down the line order a 10% overdrive for the alternator from Mike@NST, but as of now I don't see any reason Wonka2581 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] NST Pulleys	B.A.Q	Parts for sale (Private Classifieds)	17	10-04-2011 12:49 AM
What pulleys?	import111	Engine & Drivetrain	1	10-03-2010 05:14 PM
Pulleys 101...	MeetJoeAsian	Engine & Drivetrain	5	11-10-2009 08:47 PM

10-20-2012, 01:02 AM	#32 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	It took my mechanic 20 min to work out where the belts go (as I didn't have the diagram for it) then he put a breaker bar with I think 3/8" on the tensioner, moved that out of the way then took the belt off... Then he had this bitching contraption to put over the stock pulley with a torn belt over the stock pulley (to prevent damage) then he used a breaker ba on the bolt and once he undid it the pulley slid right off... Car had like 23k miles on it and was 3 years old at the time... And honestly I have no damn idea why the notches are on the pulley for alignment... I can only see it being necessary if you're rebuilding the motor