370 mods

Raidan · 07-23-2012, 05:12 PM

Quote:

Originally Posted by Kingbaby

You're not different, and this road is a painful one. Please search and read up on it. You'll have the masses swaying you each way when you create a thread like this.

You're a dreamer like the rest of the NA crowd, I myself being one of them. I spent 3k and got 20hp....just forked over another 1,600 for LTH just to gain like maybe 9hp? Even then I may not even break 300 like the VHR crowd.

Search

/thread

Is it really that hard to get even close to 400 NA?? I've searched and found 300+ isnt too hard at all so I figure 400 is within reason. Its different around here I guess, cuz all I see is TT.

Z-Girl 12 · 07-23-2012, 06:28 PM

Should have bought an M3 for the dough your gonna spend.

ANMVQ · 07-23-2012, 08:19 PM

Quote:

Originally Posted by Raidan

Is it really that hard to get even close to 400 NA?? I've searched and found 300+ isnt too hard at all so I figure 400 is within reason. Its different around here I guess, cuz all I see is TT.

To see 400WHP on a NA is not going to happen, Like said early 350 WHP IMO, Guys have not done cams, but with the VVEL what is there to gain if anything, Guys went LTH's and go nothing for the $$, I was at 300 WHP with IE, Headers and HFC's and a retune would have maybe? got me to 340WHP but would have cost like 2k? Add 6k to that for built 4.5 maybe another 20-25WHP? For 9k I went from 300 WHP to 412WHP ( Yes same dyno), I know the guy above me said this but if you wanted to be NA and at 400 WHP, The VQ was the wrong choice. Maybe the new 5.0 or a M3 would have been better, :/

FI is the only way to go, Read everything you can on this many guys have tried and not got there,

ZKraken22 · 07-23-2012, 08:48 PM

If a VQ35DE engine can but out 350 to the wheels Na with all those mods Why can't our motor be at least 400? Z1 performance got 320 to the wheels on a 350z. We don't know what this engine can do until someone tries. But yea that someone is gonna Have to have a lot of money. 20k to work with. GTM has a NA 500 HP motor for the 370z

SS_Firehawk · 07-23-2012, 11:48 PM

no need to replace the driveshaft, it's a carbon composite anyways. If your trying to stay NA, the cams and high compression stroker kit is definitely a necessity. I would look into the optimum compression ratio is with E85 on this motor. With cams I think it's doable, but no one on this side of the ocean has installed them. It will definitely cost more than forced induction, and unique. Problem is, every time someone talks about something like this, the build disappears off the map or they just go FI.

seymore4 · 07-24-2012, 12:09 AM

If you're really serious hit me up, I know a guy.. 4.3L Brian Crower stroker kit for christmas?

FL 4Motion · 07-24-2012, 12:20 AM

LSx motor swap. cheaper and easier than building our motor. Tons more n/a power potential. /thread.

Isamu · 07-24-2012, 12:21 AM

IBTL...

you better be rolling in dough kid

KaienZ34 · 07-24-2012, 09:05 AM

Please do a search, there has been tons of these threads.

Raidan · 07-24-2012, 10:18 AM

Quote:

Originally Posted by seymore4

If you're really serious hit me up, I know a guy.. 4.3L Brian Crower stroker kit for christmas?

lol good xmas gift! ill keep that in mind

Quote:

Originally Posted by SS_Firehawk

no need to replace the driveshaft, it's a carbon composite anyways. If your trying to stay NA, the cams and high compression stroker kit is definitely a necessity. I would look into the optimum compression ratio is with E85 on this motor. With cams I think it's doable, but no one on this side of the ocean has installed them. It will definitely cost more than forced induction, and unique. Problem is, every time someone talks about something like this, the build disappears off the map or they just go FI.

Oh it is? Well alright then, thanks for tellin me. I havnt started this project yet so ya it probably will drop off the map at least till I start on it. But I just wanted some input. I definitely got more than i was expecting.

Quote:

Originally Posted by ZKraken22

If a VQ35DE engine can but out 350 to the wheels Na with all those mods Why can't our motor be at least 400? Z1 performance got 320 to the wheels on a 350z. We don't know what this engine can do until someone tries. But yea that someone is gonna Have to have a lot of money. 20k to work with. GTM has a NA 500 HP motor for the 370z

Thats what im sayin, ive seen some **** with the 350's so why is it so hard to make 400 na?.. I may not even need the stroker, according to what ive seen here and elsewhere. I guess we'll see.

07-23-2012, 06:28 PM	#17 (permalink)
Z-Girl 12 A True Z Fanatic Join Date: Apr 2012 Location: Florida Posts: 4,105 Drives: Spirited Rep Power: 11716	Should have bought an M3 for the dough your gonna spend. __________________ 2012 Z-SOLD 2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq

07-23-2012, 08:48 PM	#19 (permalink)
ZKraken22 A True Z Fanatic Join Date: Jun 2011 Location: Houston Posts: 1,115 Drives: 10 Nissan 370Z 7AT Rep Power: 15	If a VQ35DE engine can but out 350 to the wheels Na with all those mods Why can't our motor be at least 400? Z1 performance got 320 to the wheels on a 350z. We don't know what this engine can do until someone tries. But yea that someone is gonna Have to have a lot of money. 20k to work with. GTM has a NA 500 HP motor for the 370z __________________ Litespeed Racing Titanium Cold Air intake// GT Haus Axle// GarageLine combo// Nismo sway bars// Nismo Spoiler // Berk TP's

07-23-2012, 11:48 PM	#20 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	no need to replace the driveshaft, it's a carbon composite anyways. If your trying to stay NA, the cams and high compression stroker kit is definitely a necessity. I would look into the optimum compression ratio is with E85 on this motor. With cams I think it's doable, but no one on this side of the ocean has installed them. It will definitely cost more than forced induction, and unique. Problem is, every time someone talks about something like this, the build disappears off the map or they just go FI. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

07-24-2012, 09:05 AM	#24 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	Please do a search, there has been tons of these threads. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Some new mods...	AndreDekolta	Member's 370Z Gallery	8	04-09-2012 05:59 PM
First Mods	GTLAW	Mid-Atlantic Region	5	03-25-2011 02:24 PM
mods???	dre	Introduction	4	04-02-2010 11:21 AM
Mods	purecustom370	Track / Autocross / Drifting / Dragstrip	4	03-19-2010 01:05 PM
I have more mods than you! LOL	SxExCx	New Forum Member	28	01-16-2010 05:15 PM

07-24-2012, 12:20 AM	#22 (permalink)
FL 4Motion A True Z Fanatic Join Date: Feb 2009 Location: FL Posts: 4,776 Drives: Baby Shark Rep Power: 701615	LSx motor swap. cheaper and easier than building our motor. Tons more n/a power potential. /thread.