|
I gravity bleed mine until the reservoir was at minimum and filled. Repeated this about 5 times. Then did about 5 hold clutch to floor open bleeder, close bleeder and
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
04-08-2012, 04:13 PM
|
#2 (permalink) |
|
Base Member
Join Date: Jan 2012
Location: Mckinney TX
Age: 42
Posts: 43
Drives: 10 370z nismo prl
Rep Power: 14  |
I gravity bleed mine until the reservoir was at minimum and filled. Repeated this about 5 times. Then did about 5 hold clutch to floor open bleeder, close bleeder and slowly pull pedal up. After this pump clutch up and down slowly about 20 times. Then I repeated this step and viola. 15 mins later job done. Also what helps is attached a suction pump to the bleeder to help speed up the gravity bleeding process. Also make sure the bleeder is completely sealed shut when you pull the pedal up. It can suck air back through it.
__________________
Hks hi pwr cbe - z1 cats - gtm stg1 sc - hks spark plugs - innovative afr gauge - defi boost gauge - Jwt oil pan spacer - 25 row oil cooler w/ spal fan and vented fender liner - z1 silicone hoses - uprev - specialty z clutch - 180 custom - VLEDS -ISS 20" complex 5 20" 275/325. Powertrix Coilovers |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Single corner bleed | TBOX | Brakes & Suspension | 11 | 05-13-2011 12:06 PM |
| Did I not lower the clutch properly? | wdkwang | Engine & Drivetrain | 16 | 03-16-2011 01:10 AM |
| Request: Clutch Bleed DIY | TrackRat | DIY Section (Do-It-Yourself) | 4 | 09-21-2010 05:26 PM |
| Anyone bleed the clutch hydraulics? | DIGItonium | Engine & Drivetrain | 11 | 12-25-2009 08:33 PM |
| DIY Request: Brake Bleed | spearfish25 | DIY Section (Do-It-Yourself) | 6 | 10-25-2009 06:25 PM |
1Likes
Threaded Mode
