12-08-2011, 12:20 AM
|
#10 (permalink)
|
|
A True Z Fanatic
Join Date: Mar 2009
Location: Houston, TX
Posts: 4,024
Drives: too slow
Rep Power: 3596
|
Re: Osiris tweaks to the 7AT Torque Map: IMHO you should really only do that to adjust for engine torque, and even then on NA we're talking +10-15% over stock values at most. The guideline is to monitor slip under what should be lockup conditions (slip meaning RPMs vs wheel speed isn't stable), and tune the torque values just high enough to reliably kill slip.
When you set them massively higher than they need to be, it does exactly as you describe: every time you click the button it slams everything and kicks you in the butt. You're just causing excess wear all over your drivetrain, and more importantly for track stuff, you're upsetting the balance of the car. The last thing you want while upshifting out of a corner and still pushing to the side a bit is to suddenly shock the drivetrain and rear wheels. It may feel "faster", but the quick, smooth engage at a lower torque map value is better.
|
|
|
Similar Threads
Threaded Mode
