![]() |
Re: the Mocal questions, I called them a couple of years ago when I bought my thermo plate, I've posted this like 3 times on different threads here somewhere: The
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#11 (permalink) |
A True Z Fanatic
![]() Join Date: Mar 2009
Location: Houston, TX
Posts: 4,024
Drives: too slow
Rep Power: 3595 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Re: the Mocal questions, I called them a couple of years ago when I bought my thermo plate, I've posted this like 3 times on different threads here somewhere:
The Mocal starts with both passages (oil cooler + bypass) open. The thermostat closes the bypass passage gradually over roughly the 175-185F range. So at 185+, basically all of your oil flow is forced through the cooler. Under 175, most of it takes the bypass route (least resistance), but a small amount will still flow through the cooler as well since the passageway is open (and this helps warm up the cooler and lines themselves, so it's not a sudden temp shock). |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Oil temp questions | Methodical4u | Engine & Drivetrain | 63 | 11-28-2019 07:10 PM |
Houston area meet | nynhex | Texas | 167 | 09-06-2011 11:49 PM |
New 370z Owner in Houston area | mchsueh87 | New 370Z Owner | 7 | 04-10-2011 05:01 PM |
Houston Area AutoX | AutoX Z | Texas | 5 | 02-27-2010 10:00 PM |
Hello from a proud new Z owner in Houston area | Zblues | New 370Z Owner | 1 | 02-25-2009 11:02 PM |