Cost of a vk56 swap

ImportConvert · 02-01-2012, 04:49 AM

Quote:

Originally Posted by 1slow370

yeah but looks better in a z and they can both make more than enough power to keep me happy so stfu and take your bitchin over to the why didn't i buy a corvette thread.

Sounds like it will meet your needs. Pix when you do it.

I don't think there is a thread like that, though, and I certainly wouldn't be in it if there were.

Nixlimited · 02-01-2012, 09:24 AM

Quote:

Originally Posted by 1slow370

yeah but looks better in a z and they can both make more than enough power to keep me happy so stfu and take your bitchin over to the why didn't i buy a corvette thread.

Really? Is that what's going on here? F-.

Ages · 02-01-2012, 11:20 AM

Why can't people just say "cool good luck" if it costs him 50 grand that's his problem clearly he wants to be original. Nothing wrong with that at all.

Good luck, hope it works out for you. Can't wait to see it.

DOOMMONKEY777 · 02-01-2012, 12:06 PM

About 5 years ago i was looking at 350s and came across an AWD 350 z using infinity all wheel drive and man every one was saying ohh its a crap install there are going to be problems not to mension the costs but then i though that monster there will leave any skyline in the dust.....Damn i still want one lol.

P.S. Ops read the argument 2 late, seriously dude stfu and get a corvette.

Hermitns · 02-04-2012, 11:48 AM

Quote:

Originally Posted by theDreamer

I think you are being a bit conservative on the additional cr@p, but who knows until someone does it.
Would love to see a Nissan V8 instead of another LSx build, but the fitting the Nissan is going to be tough.

If Toyota can do it for the Camry...why not Nissan and the Z?

Hermitns · 02-04-2012, 11:50 AM

Quote:

Originally Posted by theDreamer

I think you are being a bit conservative on the additional cr@p, but who knows until someone does it.
Would love to see a Nissan V8 instead of another LSx build, but the fitting the Nissan is going to be tough.

NASCAR edition TRD V8 Camry drive - YouTube

If Toyota can do it for the Camry...why not Nissan and the Z?

theDreamer · 02-04-2012, 01:24 PM

Quote:

Originally Posted by Hermitns

NASCAR edition TRD V8 Camry drive - YouTube

If Toyota can do it for the Camry...why not Nissan and the Z?

Company funded Nascar V8 into a huge sedan, that is easy.
And I have seen that, it was a great job but honestly it was pure publicity (similar to the Juke-R by Nissan).

1slow370 · 02-05-2012, 10:43 PM

ok sad for the project/great for me, this has all been put on hold for a bit, might be moving and may need money now we'll see move might not work outin which case it's back on, or if i do move once i get settled i will start again, after selling all my stuff.

ImportConvert · 02-06-2012, 09:14 PM

Quote:

Originally Posted by 1slow370

ok sad for the project/great for me, this has all been put on hold for a bit, might be moving and may need money now we'll see move might not work outin which case it's back on, or if i do move once i get settled i will start again, after selling all my stuff.

Which is why I critiqued it. I didn't think you were going to actually do anything about it based on your OP, your signature, and other posts in this thread.

When/if you actually do it...then you will get nothing but props from me

Until then, it's just mental masturbation up for debate.

pyrrhus17 · 02-07-2012, 07:42 AM

Yoshi's VK56DE 240SX Build - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum here's a guy putting one in a 240 with a 370z tranny and adapter plate .If you read the thread another member says that there is a 370z in his area with this very swap . so looks like others are doing it . Really cool ,could be long term power here's a 280 swap http://www.titantalk.com/forums/tita...ld-thread.html and someone just starting another 240 http://www.titantalk.com/forums/tita...240sx-s14.html

Cmike2780 · 02-07-2012, 10:54 AM

I just read somewhere that Nismo developed a 3.4-liter VK-series V8 engine for LMP2 cars. Interesting.

pyrrhus17 · 02-07-2012, 12:59 PM

found this sounds great from another thread 350z Revs on Vimeo
My Vk56 Swapped 350z *video* - Page 2 - Nissan Titan Forum

http://vimeo.com/14470732

http://vimeo.com/14627971

1slow370 · 02-07-2012, 05:36 PM

if it were a small move i would just keep rolling but i don't want to truck a motor across the country with all my sh!t, and tow the car so i can't start till stuff is figured out. I was going to buy the motor the day the call came in.

StockSC300 · 04-05-2012, 10:53 AM

[QUOTE/]
GM experimented with DOHC designs and stuck with cam-in-block for a reason. These reasons have been detailed again and again and again, but suffice it to say when you have a 450# motor complete from manifold to oil-pan that will make over 500 horsepower and pass emissions, you have a winner. Now consider that it will produce over 500 horses at the TIRES with exhaust and a mild cam and a tune.
[/QUOTE]

Actually GM didn't do anything other than hire Lotus to do all of the engineering and design for the LT5 if that is what you're talking about??

Beejis60 · 08-17-2012, 12:39 PM

Quote:

Originally Posted by Hermitns

NASCAR edition TRD V8 Camry drive - YouTube

If Toyota can do it for the Camry...why not Nissan and the Z?

Quote:

Originally Posted by theDreamer

Company funded Nascar V8 into a huge sedan, that is easy.
And I have seen that, it was a great job but honestly it was pure publicity (similar to the Juke-R by Nissan).

You ARE aware that every NASCAR motor is based on the LS2 block, right? Therefore an OHC V8 is not used.
And yes I know this thread is old and yes I know I'm new here, but I felt compelled to bump with this proper information.

02-01-2012, 11:20 AM	#48 (permalink)
Ages Base Member Join Date: Oct 2011 Location: MA Posts: 184 Drives: 11 370Z SP MT Gunmet Rep Power: 13	Why can't people just say "cool good luck" if it costs him 50 grand that's his problem clearly he wants to be original. Nothing wrong with that at all. Good luck, hope it works out for you. Can't wait to see it. ZeeRedZ likes this. __________________ F.I.CBE\|F.I.HFC\|20/25mm Z1 Spacers\|CS TypeN Wing(cf)\|CS Diffuser (cf)\|EvoR Fangs(cf)\|EvoR Type2 Front Lip\|Evor Side Blades\|Stillen Gen3\|JDM Fog\|

02-01-2012, 12:06 PM	#49 (permalink)
DOOMMONKEY777 A True Z Fanatic Join Date: Sep 2010 Location: Crooklyn Posts: 1,008 Drives: 370Z 6psd-sport-pkg Rep Power: 20	About 5 years ago i was looking at 350s and came across an AWD 350 z using infinity all wheel drive and man every one was saying ohh its a crap install there are going to be problems not to mension the costs but then i though that monster there will leave any skyline in the dust.....Damn i still want one lol. P.S. Ops read the argument 2 late, seriously dude stfu and get a corvette. __________________ Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane Last edited by DOOMMONKEY777; 04-09-2012 at 11:39 PM.

02-05-2012, 10:43 PM	#53 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	ok sad for the project/great for me, this has all been put on hold for a bit, might be moving and may need money now we'll see move might not work outin which case it's back on, or if i do move once i get settled i will start again, after selling all my stuff. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

02-07-2012, 07:42 AM	#55 (permalink)
pyrrhus17 Base Member Join Date: Jun 2011 Location: colorado Posts: 90 Drives: xterra Rep Power: 13	Yoshi's VK56DE 240SX Build - Zilvia.net Forums \| Nissan 240SX (Silvia) and Z (Fairlady) Car Forum here's a guy putting one in a 240 with a 370z tranny and adapter plate .If you read the thread another member says that there is a 370z in his area with this very swap . so looks like others are doing it . Really cool ,could be long term power here's a 280 swap http://www.titantalk.com/forums/tita...ld-thread.html and someone just starting another 240 http://www.titantalk.com/forums/tita...240sx-s14.html Last edited by pyrrhus17; 02-07-2012 at 07:53 AM.

02-07-2012, 10:54 AM	#56 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 28	I just read somewhere that Nismo developed a 3.4-liter VK-series V8 engine for LMP2 cars. Interesting. __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

02-07-2012, 12:59 PM	#57 (permalink)
pyrrhus17 Base Member Join Date: Jun 2011 Location: colorado Posts: 90 Drives: xterra Rep Power: 13	found this sounds great from another thread 350z Revs on Vimeo My Vk56 Swapped 350z video - Page 2 - Nissan Titan Forum http://vimeo.com/14470732 http://vimeo.com/14627971 Last edited by pyrrhus17; 02-07-2012 at 01:06 PM.

02-07-2012, 05:36 PM	#58 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	if it were a small move i would just keep rolling but i don't want to truck a motor across the country with all my sh!t, and tow the car so i can't start till stuff is figured out. I was going to buy the motor the day the call came in. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

04-05-2012, 10:53 AM	#59 (permalink)
StockSC300 Base Member Join Date: Apr 2012 Location: Sarasota Posts: 1 Drives: Nissan 240sx 1UZ-V8 Rep Power: 13	[QUOTE/] GM experimented with DOHC designs and stuck with cam-in-block for a reason. These reasons have been detailed again and again and again, but suffice it to say when you have a 450# motor complete from manifold to oil-pan that will make over 500 horsepower and pass emissions, you have a winner. Now consider that it will produce over 500 horses at the TIRES with exhaust and a mild cam and a tune. [/QUOTE] Actually GM didn't do anything other than hire Lotus to do all of the engineering and design for the LT5 if that is what you're talking about??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SWAP: Possibly looking to swap my seibon carbon wing hatch for wingless hatch	RCZ	Parts for sale (Private Classifieds)	13	04-11-2011 05:28 PM
2jz swap	Gunzero	Engine & Drivetrain	14	08-23-2010 10:57 PM
But how much does it REALLY cost....	BjjKing	Nissan 370Z Pricing / Ordering Discussions	17	09-22-2009 09:41 PM
Swap 7AT for 6MT	Gabriel77	Nissan 370Z General Discussions	34	08-26-2009 10:09 AM
Any one else' Z cost this much?	370Z_Girl_close	Canada	8	04-24-2009 01:23 PM