Drop Engineering Engine Mounts

NYBladeZ

that tranny mount is going to make the m6 tranny feel tight as hell. However, the last time someone tried that product the vibration was so bad you could feel it well after you stopped driving.

__________________
2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold
2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

christian370z

These are not true solid mounts due to the polyurethane cores, but my I installed some polyurethane trans and engine mounts in my auto trans Saab and the vibration was fairly bad for the first couple hundred miles before it was completely broken in. After, it was not that much worse than stock and the drivetrain felt so much more solid too.

Then again, the Z is a FAR better car. The stock mounts in this car are actually nicely stiff for N/A applications.

__________________
-320whp / 259wftlbs-
SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

KamiSpeed

Well if anyone is interested in being the first customer to try these out I can work out a deal if you are willing to post a review that way we can see how they compare to OEM

__________________

christian370z

If you were closer, I would definitely take you up on this and have you install a set.

__________________
-320whp / 259wftlbs-
SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

KamiSpeed

I can have them shipped to you and you can get them installed elsewhere haha

__________________

Jamaica

Get em and have lou install them at amp