Drop Engineering Engine Mounts

KamiSpeed · 08-18-2011, 12:34 PM

Quote:

Originally Posted by christian370z

If you were closer, I would definitely take you up on this and have you install a set.

I can have them shipped to you and you can get them installed elsewhere haha

Jamaica · 08-18-2011, 06:58 PM

Quote:

Originally Posted by christian370z

If you were closer, I would definitely take you up on this and have you install a set.

Get em and have lou install them at amp

NewYorkJon34 · 08-16-2011, 11:31 PM

Any pics or instructions on the engine mounts Saku? Im pretty interested in this

KamiSpeed · 08-17-2011, 12:17 PM

Quote:

Originally Posted by NewYorkJon34

Any pics or instructions on the engine mounts Saku? Im pretty interested in this

as far as I know only DE has it installed on their car, I'll see if I can get the instructions and pictures... but you'd pretty much be one of the first ones to test it out

KamiSpeed · 08-17-2011, 12:15 PM

hey guys,

so I got in contact with some guys over at DE and this is what they said about the mounts:

Quote:

Due to the suspended design, they do not touch metal to metal. We have these installed on our own 370Z and it is certainly stiffer than stock, but it is not uncomfortable. I have ridden in cars with aftermarket mounts and have felt my teeth chattering and that is hardly the case here. I personally have ridden in our Z a few times and I have no complaints about the difference in ride/comfort.

so those who thought this was strictly for a race car, it seems like its not the case

NewYorkJon34 · 08-18-2011, 06:35 PM

Hey saku, pm me a price shipped to 34120, thanks. For the engine mount

kosstick · 08-19-2011, 11:11 AM

how difficult is this to install? Also will these work on the g37?

KamiSpeed · 08-19-2011, 11:50 AM

Quote:

Originally Posted by kosstick

how difficult is this to install? Also will these work on the g37?

Engine mounts are always an issue... so I'd say so, unless you have the right tools. Unfortunately I'm not sure they work on the G37, the description from Drop only puts it for the Z34

kosstick · 08-19-2011, 12:16 PM

Quote:

Originally Posted by KamiSpeed

Engine mounts are always an issue... so I'd say so, unless you have the right tools. Unfortunately I'm not sure they work on the G37, the description from Drop only puts it for the Z34

Any way you can make sure? I know we use the same engine and same under body bracings, not to say this should be the same but could be a possibility

KamiSpeed · 08-23-2011, 05:52 PM

Quote:

Originally Posted by kosstick

Any way you can make sure? I know we use the same engine and same under body bracings, not to say this should be the same but could be a possibility

Drop isn't willing to bet on it... so thats how it stands haha

XwChriswX · 08-23-2011, 06:07 PM

Are these something you can get separate? i.e. the engine or the tranny mounts only, or is it something you wanna upgrade both at the same time?

Secondly are these something that only work for MT's or would AT's benefit from these as well? Prolly the engine ones more than the tranny ones right??

kosstick · 08-24-2011, 10:29 PM

Quote:

Originally Posted by KamiSpeed

Drop isn't willing to bet on it... so thats how it stands haha

That sucks... Anyone know of anyone with mounts for the g37?? (i tried the myg37.com forums too, but the 370z.com seems to be more into more the modding scheme a little more)

phunk · 08-19-2011, 11:56 AM

my 350z has solid metal engine mounts and stock trans mount. Crazy vibration is only apparent while starting the engine. During driving it has a great feel to it and very little extra vibration, really only noticable when chugging the engine.

If I wanted stiffer mounts in my 370z, i wouldnt even hesitate to get these ones if vibrations were my only concern. After I take care of some other priorities with my car, I will either end up with these or just make solid metal ones again.

NeverBoneStck · 08-25-2011, 01:05 AM

I am looking to see if this works for my G37 as well. If the g and z has then same part # we are pretty much good to go..

NeverBoneStck · 08-25-2011, 01:06 AM

Any special price for me being the first G37 for the tran mount ??

08-16-2011, 11:31 PM	#3 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1066	Any pics or instructions on the engine mounts Saku? Im pretty interested in this __________________ NewYorkJon34's Ultimate Z Build

08-18-2011, 06:35 PM	#6 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1066	Hey saku, pm me a price shipped to 34120, thanks. For the engine mount __________________ NewYorkJon34's Ultimate Z Build

08-23-2011, 06:07 PM	#11 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	Are these something you can get separate? i.e. the engine or the tranny mounts only, or is it something you wanna upgrade both at the same time? Secondly are these something that only work for MT's or would AT's benefit from these as well? Prolly the engine ones more than the tranny ones right?? __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

08-19-2011, 11:56 AM	#13 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,669 Drives: 370 Rep Power: 974724	my 350z has solid metal engine mounts and stock trans mount. Crazy vibration is only apparent while starting the engine. During driving it has a great feel to it and very little extra vibration, really only noticable when chugging the engine. If I wanted stiffer mounts in my 370z, i wouldnt even hesitate to get these ones if vibrations were my only concern. After I take care of some other priorities with my car, I will either end up with these or just make solid metal ones again. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

08-25-2011, 01:05 AM	#14 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 18	I am looking to see if this works for my G37 as well. If the g and z has then same part # we are pretty much good to go.. __________________ Juiced! That is all you need to know !!

08-19-2011, 11:11 AM	#7 (permalink)
kosstick Track Member Join Date: Apr 2011 Location: Los Angles Posts: 668 Drives: G37 Rep Power: 16	how difficult is this to install? Also will these work on the g37?

08-25-2011, 01:06 AM	#15 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 18	Any special price for me being the first G37 for the tran mount ?? __________________ Juiced! That is all you need to know !!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Solid Motor Mounts	robtrink	Parts for sale (Private Classifieds)	5	08-17-2011 07:39 AM
DIY: Steps to add rear tonneau mounts for those without	TreeSemdyZee	DIY Section (Do-It-Yourself)	9	01-05-2011 01:46 PM
Camber Adjustable Top Mounts On Coilovers	SPOHN	Brakes & Suspension	3	02-28-2010 10:02 AM
Radar Mounts	dainedazz	Audio & Video	4	08-11-2009 07:54 PM